Kconfig: Migrate MTDIDS_DEFAULT / MTDPARTS_DEFAULT

[oweals/u-boot.git] / include / configs / T102xQDS.h

diff --git a/include/configs/T102xQDS.h b/include/configs/T102xQDS.h
index b0ea95e58a32c9d8e6610945e596a5704ae442f5..259e8a01f38ddb4f40346a05cc358f72d90eb6be 100644 (file)
--- a/include/configs/T102xQDS.h
+++ b/include/configs/T102xQDS.h
@@ -145,7 +145,6 @@
 
 #if defined(CONFIG_SPIFLASH)
 #define CONFIG_SYS_EXTRA_ENV_RELOC
-#define CONFIG_ENV_IS_IN_SPI_FLASH
 #define CONFIG_ENV_SPI_BUS             0
 #define CONFIG_ENV_SPI_CS              0
 #define CONFIG_ENV_SPI_MAX_HZ          10000000
@@ -155,23 +154,19 @@
 #define CONFIG_ENV_SECT_SIZE           0x10000
 #elif defined(CONFIG_SDCARD)
 #define CONFIG_SYS_EXTRA_ENV_RELOC
-#define CONFIG_ENV_IS_IN_MMC
 #define CONFIG_SYS_MMC_ENV_DEV         0
 #define CONFIG_ENV_SIZE                        0x2000
 #define CONFIG_ENV_OFFSET              (512 * 0x800)
 #elif defined(CONFIG_NAND)
 #define CONFIG_SYS_EXTRA_ENV_RELOC
-#define CONFIG_ENV_IS_IN_NAND
 #define CONFIG_ENV_SIZE                        0x2000
 #define CONFIG_ENV_OFFSET              (10 * CONFIG_SYS_NAND_BLOCK_SIZE)
 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
-#define CONFIG_ENV_IS_IN_REMOTE
 #define CONFIG_ENV_ADDR                0xffe20000
 #define CONFIG_ENV_SIZE                0x2000
 #elif defined(CONFIG_ENV_IS_NOWHERE)
 #define CONFIG_ENV_SIZE                0x2000
 #else
-#define CONFIG_ENV_IS_IN_FLASH
 #define CONFIG_ENV_ADDR                (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 #define CONFIG_ENV_SIZE                0x2000
 #define CONFIG_ENV_SECT_SIZE   0x20000 /* 128K (one sector) */
@@ -370,7 +365,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_NAND_DDR_LAW                11
 #define CONFIG_SYS_NAND_BASE_LIST      { CONFIG_SYS_NAND_BASE }
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
-#define CONFIG_CMD_NAND
 
 #define CONFIG_SYS_NAND_BLOCK_SIZE     (128 * 1024)
 
@@ -628,7 +622,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_SATA1               CONFIG_SYS_MPC85xx_SATA1_ADDR
 #define CONFIG_SYS_SATA1_FLAGS         FLAGS_DMA
 #define CONFIG_LBA48
-#define CONFIG_CMD_SATA
 #endif
 
 /*
@@ -750,7 +743,6 @@ unsigned long get_board_ddr_clk(void);
 #ifdef CONFIG_FMAN_ENET
 #define CONFIG_MII             /* MII PHY management */
 #define CONFIG_ETHPRIME                "FM1@DTSEC4"
-#define CONFIG_PHY_GIGE                /* Include GbE speed/duplex detection */
 #endif
 
 /*
@@ -759,15 +751,7 @@ unsigned long get_board_ddr_clk(void);
 #ifdef CONFIG_MTD_NOR_FLASH
 #define CONFIG_MTD_DEVICE
 #define CONFIG_MTD_PARTITIONS
-#define CONFIG_CMD_MTDPARTS
 #define CONFIG_FLASH_CFI_MTD
-#define MTDIDS_DEFAULT    "nor0=fe8000000.nor,nand0=fff800000.flash," \
-                         "spi0=spife110000.0"
-#define MTDPARTS_DEFAULT  "mtdparts=fe8000000.nor:1m(uboot),5m(kernel)," \
-                         "128k(dtb),96m(fs),-(user);"\
-                         "fff800000.flash:2m(uboot),9m(kernel),"\
-                         "128k(dtb),96m(fs),-(user);spife110000.0:" \
-                         "2m(uboot),9m(kernel),128k(dtb),-(user)"
 #endif
 
 /*
@@ -776,17 +760,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_LOADS_ECHO              /* echo on for serial download */
 #define CONFIG_SYS_LOADS_BAUD_CHANGE   /* allow baudrate change */
 
-/*
- * Command line configuration.
- */
-#define CONFIG_CMD_ERRATA
-#define CONFIG_CMD_IRQ
-#define CONFIG_CMD_REGINFO
-
-#ifdef CONFIG_PCI
-#define CONFIG_CMD_PCI
-#endif
-
 /*
  * Miscellaneous configurable options
  */
@@ -794,14 +767,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_CMDLINE_EDITING                 /* Command-line editing */
 #define CONFIG_AUTO_COMPLETE                   /* add autocompletion support */
 #define CONFIG_SYS_LOAD_ADDR   0x2000000       /* default load address */
-#ifdef CONFIG_CMD_KGDB
-#define CONFIG_SYS_CBSIZE      1024            /* Console I/O Buffer Size */
-#else
-#define CONFIG_SYS_CBSIZE      256             /* Console I/O Buffer Size */
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
-#define CONFIG_SYS_MAXARGS     16              /* max number of command args */
-#define CONFIG_SYS_BARGSIZE  CONFIG_SYS_CBSIZE  /* Boot Argument Buffer Size */
 
 /*
  * For booting Linux, the board info and command line data
@@ -864,11 +829,6 @@ unsigned long get_board_ddr_clk(void);
 
 #define CONFIG_BOOTCOMMAND     CONFIG_LINUX
 
-/* Hash command with SHA acceleration supported in hardware */
-#ifdef CONFIG_FSL_CAAM
-#define CONFIG_CMD_HASH
-#endif
-
 #include <asm/fsl_secure_boot.h>
 
 #endif /* __T1024QDS_H */