Convert CONFIG_ENV_IS_IN_MMC/NAND/UBI and NOWHERE to Kconfig

[oweals/u-boot.git] / include / configs / MPC837XEMDS.h

diff --git a/include/configs/MPC837XEMDS.h b/include/configs/MPC837XEMDS.h
index df478881efca121f79654c890ff2384342df5278..781a93ab14c3ef1db463cdf5d27a0c7bc9b2973c 100644 (file)
--- a/include/configs/MPC837XEMDS.h
+++ b/include/configs/MPC837XEMDS.h
@@ -8,8 +8,6 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#define CONFIG_DISPLAY_BOARDINFO
-
 /*
  * High Level Configuration Options
  */
@@ -99,7 +97,6 @@
  */
 #define CONFIG_SYS_OBIR                0x31100000
 
-#define CONFIG_BOARD_EARLY_INIT_F /* call board_pre_init */
 #define CONFIG_BOARD_EARLY_INIT_R
 #define CONFIG_HWCONFIG
 
@@ -200,7 +197,7 @@
 #endif
 
 /* CONFIG_SYS_MONITOR_LEN must be a multiple of CONFIG_ENV_SECT_SIZE */
-#define CONFIG_SYS_MONITOR_LEN (384 * 1024) /* Reserve 384 kB for Mon */
+#define CONFIG_SYS_MONITOR_LEN (512 * 1024) /* Reserve 512 kB for Mon */
 #define CONFIG_SYS_MALLOC_LEN  (512 * 1024) /* Reserved for malloc */
 
 /*
@@ -318,14 +315,6 @@
 #define CONFIG_SYS_NS16550_COM1        (CONFIG_SYS_IMMR+0x4500)
 #define CONFIG_SYS_NS16550_COM2        (CONFIG_SYS_IMMR+0x4600)
 
-/* Use the HUSH parser */
-#define CONFIG_SYS_HUSH_PARSER
-
-/* Pass open firmware flat tree */
-#define CONFIG_OF_LIBFDT       1
-#define CONFIG_OF_BOARD_SETUP  1
-#define CONFIG_OF_STDOUT_VIA_ALIAS     1
-
 /* I2C */
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_FSL
@@ -387,14 +376,9 @@ extern int board_pci_host_broken(void);
 #define CONFIG_PQ_MDS_PIB      1 /* PQ MDS Platform IO Board */
 
 #define CONFIG_HAS_FSL_DR_USB  1 /* fixup device tree for the DR USB */
-#define CONFIG_CMD_USB
-#define CONFIG_USB_STORAGE
-#define CONFIG_USB_EHCI
 #define CONFIG_USB_EHCI_FSL
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 
-#define CONFIG_PCI_PNP         /* do pci plug-and-play */
-
 #undef CONFIG_EEPRO100
 #undef CONFIG_PCI_SCAN_SHOW    /* show pci devices on startup */
 #define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1957  /* Freescale */
@@ -452,9 +436,6 @@ extern int board_pci_host_broken(void);
 
 #ifdef CONFIG_FSL_SATA
 #define CONFIG_LBA48
-#define CONFIG_CMD_SATA
-#define CONFIG_DOS_PARTITION
-#define CONFIG_CMD_EXT2
 #endif
 
 /*
@@ -467,8 +448,6 @@ extern int board_pci_host_broken(void);
        #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K(one sector) for env */
        #define CONFIG_ENV_SIZE         0x2000
 #else
-       #define CONFIG_SYS_NO_FLASH     1       /* Flash is not usable now */
-       #define CONFIG_ENV_IS_NOWHERE   1       /* Store ENV in memory only */
        #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - 0x1000)
        #define CONFIG_ENV_SIZE         0x2000
 #endif
@@ -484,14 +463,9 @@ extern int board_pci_host_broken(void);
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_HOSTNAME
 
-
 /*
  * Command line configuration.
  */
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_DATE
 
 #if defined(CONFIG_PCI)
     #define CONFIG_CMD_PCI
@@ -502,17 +476,10 @@ extern int board_pci_host_broken(void);
 
 #undef CONFIG_WATCHDOG         /* watchdog disabled */
 
-#define CONFIG_MMC     1
-
 #ifdef CONFIG_MMC
 #define CONFIG_FSL_ESDHC
 #define CONFIG_FSL_ESDHC_PIN_MUX
 #define CONFIG_SYS_FSL_ESDHC_ADDR      CONFIG_SYS_MPC83xx_ESDHC_ADDR
-#define CONFIG_CMD_MMC
-#define CONFIG_GENERIC_MMC
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
-#define CONFIG_DOS_PARTITION
 #endif
 
 /*
@@ -539,6 +506,7 @@ extern int board_pci_host_broken(void);
  * the maximum mapped by the Linux kernel during initialization.
  */
 #define CONFIG_SYS_BOOTMAPSZ   (256 << 20) /* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTM_LEN   (64 << 20)      /* Increase max gunzip size */
 
 /*
  * Core HID Setup
@@ -672,11 +640,8 @@ extern int board_pci_host_broken(void);
 #define CONFIG_HAS_ETH1
 #endif
 
-#define CONFIG_BAUDRATE 115200
-
 #define CONFIG_LOADADDR 800000 /* default location for tftp and bootm */
 
-#define CONFIG_BOOTDELAY 6     /* -1 disables auto-boot */
 #undef CONFIG_BOOTARGS         /* the boot command will set bootargs */
 
 #define CONFIG_EXTRA_ENV_SETTINGS                                      \
@@ -706,7 +671,6 @@ extern int board_pci_host_broken(void);
        "tftp $fdtaddr $fdtfile;"                                       \
        "bootm $loadaddr $ramdiskaddr $fdtaddr"
 
-
 #define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND
 
 #endif /* __CONFIG_H */