colibri_imx6: fix video stdout in default environment
[oweals/u-boot.git] / include / common.h
index 8ac5fca9eeb79c44a61634a694b7173a538ff0b7..f0679ac70544fdf2f89812b8f2c9ff4d8334cf39 100644 (file)
@@ -2,9 +2,8 @@
 /*
  * Common header file for U-Boot
  *
- * This file still includes quite a bit of stuff that should be in separate
- * headers. Please think before adding more things.
- * Patches to remove things are welcome.
+ * This file still includes quite a few headers that should be included
+ * individually as needed. Patches to remove things are welcome.
  *
  * (C) Copyright 2000-2009
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 #define __COMMON_H_    1
 
 #ifndef __ASSEMBLY__           /* put C only stuff in this section */
-
-typedef volatile unsigned long vu_long;
-typedef volatile unsigned short vu_short;
-typedef volatile unsigned char vu_char;
-
 #include <config.h>
 #include <errno.h>
 #include <time.h>
-#include <asm-offsets.h>
-#include <linux/bitops.h>
-#include <linux/bug.h>
-#include <linux/delay.h>
 #include <linux/types.h>
 #include <linux/printk.h>
 #include <linux/string.h>
-#include <linux/stringify.h>
-#include <asm/ptrace.h>
 #include <stdarg.h>
 #include <stdio.h>
 #include <linux/kernel.h>
-
-#include <part.h>
-#include <flash.h>
-#include <image.h>
-
-#ifdef __LP64__
-#define CONFIG_SYS_SUPPORT_64BIT_DATA
-#endif
-
-#include <log.h>
-
 #include <asm/u-boot.h> /* boot information for Linux kernel */
 #include <asm/global_data.h>   /* global data used for startup functions */
-
-/* startup functions, used in:
- * common/board_f.c
- * common/init/board_init.c
- * common/board_r.c
- * common/board_info.c
- */
-#include <init.h>
-
-/*
- * Function Prototypes
- */
-void   hang            (void) __attribute__ ((noreturn));
-
 #include <display_options.h>
-
-/* common/main.c */
-void   main_loop       (void);
-
-int checkflash(void);
-int checkdram(void);
-extern u8 __dtb_dt_begin[];    /* embedded device tree blob */
-extern u8 __dtb_dt_spl_begin[];        /* embedded device tree blob for SPL/TPL */
-
-/**
- * arch_fixup_fdt() - Write arch-specific information to fdt
- *
- * Defined in arch/$(ARCH)/lib/bootm-fdt.c
- *
- * @blob:      FDT blob to write to
- * @return 0 if ok, or -ve FDT_ERR_... on failure
- */
-int arch_fixup_fdt(void *blob);
-
-/* common/flash.c */
-void flash_perror (int);
-
-/* common/cmd_source.c */
-int    source (ulong addr, const char *fit_uname);
-
-extern ulong load_addr;                /* Default Load Address */
-extern ulong save_addr;                /* Default Save Address */
-extern ulong save_size;                /* Default Save Size */
-
-/* common/cmd_net.c */
-int do_tftpb(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]);
-
-/* common/cmd_fat.c */
-int do_fat_fsload(cmd_tbl_t *, int, int, char * const []);
-
-/* common/cmd_ext2.c */
-int do_ext2load(cmd_tbl_t *, int, int, char * const []);
-
-/* common/exports.c */
-void   jumptable_init(void);
-
-/* common/kallsysm.c */
-const char *symbol_lookup(unsigned long addr, unsigned long *caddr);
-
-/* common/memsize.c */
-long   get_ram_size  (long *, long);
-phys_size_t get_effective_memsize(void);
-
-/* $(BOARD)/$(BOARD).c */
-void   reset_phy     (void);
-void   fdc_hw_init   (void);
-
-#if !defined(CONFIG_ENV_EEPROM_IS_ON_I2C) && defined(CONFIG_SYS_I2C_EEPROM_ADDR)
-# define CONFIG_SYS_DEF_EEPROM_ADDR CONFIG_SYS_I2C_EEPROM_ADDR
-#endif
-
-#if defined(CONFIG_SYS_DRAM_TEST)
-int testdram(void);
-#endif /* CONFIG_SYS_DRAM_TEST */
-
-#if defined(CONFIG_ARM)
-void   relocate_code(ulong);
-#else
-void   relocate_code(ulong, gd_t *, ulong) __attribute__ ((noreturn));
-#endif
-
-void s_init(void);
-
-void   upmconfig     (unsigned int, unsigned int *, unsigned int);
-ulong  get_tbclk     (void);
-void   reset_misc    (void);
-void   reset_cpu     (ulong addr);
-void ft_cpu_setup(void *blob, bd_t *bd);
-void ft_pci_setup(void *blob, bd_t *bd);
-
-/* $(CPU)/speed.c */
-int    get_clocks (void);
-ulong  get_bus_freq  (ulong);
-int get_serial_clock(void);
-
-/* lib/uuid.c */
-#include <uuid.h>
-
-/* lib/vsprintf.c */
 #include <vsprintf.h>
-
-/* lib/net_utils.c */
-#include <net.h>
-
-#include <bootstage.h>
-
-#else  /* __ASSEMBLY__ */
-
 #endif /* __ASSEMBLY__ */
 
-/* Put only stuff here that the assembler can digest */
-
-#ifdef CONFIG_POST
-#define CONFIG_HAS_POST
-#ifndef CONFIG_POST_ALT_LIST
-#define CONFIG_POST_STD_LIST
-#endif
-#endif
-
-#define ROUND(a,b)             (((a) + (b) - 1) & ~((b) - 1))
-
-/*
- * check_member() - Check the offset of a structure member
- *
- * @structure: Name of structure (e.g. global_data)
- * @member:    Name of member (e.g. baudrate)
- * @offset:    Expected offset in bytes
- */
-#define check_member(structure, member, offset) _Static_assert( \
-       offsetof(struct structure, member) == offset, \
-       "`struct " #structure "` offset for `" #member "` is not " #offset)
-
-/* Avoid using CONFIG_EFI_STUB directly as we may boot from other loaders */
-#ifdef CONFIG_EFI_STUB
-#define ll_boot_init() false
-#else
-#define ll_boot_init() true
-#endif
-
 /* Pull in stuff for the build system */
 #ifdef DO_DEPS_ONLY
 # include <env_internal.h>