+/* SPDX-License-Identifier: GPL-2.0+ */
/*
* (C) Copyright 2000-2004
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
*/
#ifndef BLK_H
#define BLK_H
+#include <efi.h>
+
#ifdef CONFIG_SYS_64BIT_LBA
typedef uint64_t lbaint_t;
#define LBAFlength "ll"
IF_TYPE_SD,
IF_TYPE_SATA,
IF_TYPE_HOST,
- IF_TYPE_SYSTEMACE,
+ IF_TYPE_NVME,
+ IF_TYPE_EFI,
+ IF_TYPE_VIRTIO,
IF_TYPE_COUNT, /* Number of interface types */
};
+#define BLK_VEN_SIZE 40
+#define BLK_PRD_SIZE 20
+#define BLK_REV_SIZE 8
+
+/*
+ * Identifies the partition table type (ie. MBR vs GPT GUID) signature
+ */
+enum sig_type {
+ SIG_TYPE_NONE,
+ SIG_TYPE_MBR,
+ SIG_TYPE_GUID,
+
+ SIG_TYPE_COUNT /* Number of signature types */
+};
+
/*
* With driver model (CONFIG_BLK) this is uclass platform data, accessible
* with dev_get_uclass_platdata(dev)
lbaint_t lba; /* number of blocks */
unsigned long blksz; /* block size */
int log2blksz; /* for convenience: log2(blksz) */
- char vendor[40+1]; /* IDE model, SCSI Vendor */
- char product[20+1]; /* IDE Serial no, SCSI product */
- char revision[8+1]; /* firmware revision */
-#ifdef CONFIG_BLK
+ char vendor[BLK_VEN_SIZE + 1]; /* device vendor string */
+ char product[BLK_PRD_SIZE + 1]; /* device product number */
+ char revision[BLK_REV_SIZE + 1]; /* firmware revision */
+ enum sig_type sig_type; /* Partition table signature type */
+ union {
+ uint32_t mbr_sig; /* MBR integer signature */
+ efi_guid_t guid_sig; /* GPT GUID Signature */
+ };
+#if CONFIG_IS_ENABLED(BLK)
+ /*
+ * For now we have a few functions which take struct blk_desc as a
+ * parameter. This field allows them to look up the associated
+ * device. Once these functions are removed we can drop this field.
+ */
struct udevice *bdev;
#else
unsigned long (*block_read)(struct blk_desc *block_dev,
#define PAD_TO_BLOCKSIZE(size, blk_desc) \
(PAD_SIZE(size, blk_desc->blksz))
-#ifdef CONFIG_BLOCK_CACHE
+#if CONFIG_IS_ENABLED(BLOCK_CACHE)
+
+/**
+ * blkcache_init() - initialize the block cache list pointers
+ */
+int blkcache_init(void);
+
/**
* blkcache_read() - attempt to read a set of blocks from cache
*
* @param blksz - size in bytes of each block
* @param buf - buffer to contain cached data
*
- * @return - '1' if block returned from cache, '0' otherwise.
+ * @return - 1 if block returned from cache, 0 otherwise.
*/
int blkcache_read(int iftype, int dev,
lbaint_t start, lbaint_t blkcnt,
#endif
-#ifdef CONFIG_BLK
+#if CONFIG_IS_ENABLED(BLK)
struct udevice;
/* Operations on block devices */
*/
unsigned long (*erase)(struct udevice *dev, lbaint_t start,
lbaint_t blkcnt);
+
+ /**
+ * select_hwpart() - select a particular hardware partition
+ *
+ * Some devices (e.g. MMC) can support partitioning at the hardware
+ * level. This is quite separate from the normal idea of
+ * software-based partitions. MMC hardware partitions must be
+ * explicitly selected. Once selected only the region of the device
+ * covered by that partition is accessible.
+ *
+ * The MMC standard provides for two boot partitions (numbered 1 and 2),
+ * rpmb (3), and up to 4 addition general-purpose partitions (4-7).
+ *
+ * @desc: Block device to update
+ * @hwpart: Hardware partition number to select. 0 means the raw
+ * device, 1 is the first partition, 2 is the second, etc.
+ * @return 0 if OK, -ve on error
+ */
+ int (*select_hwpart)(struct udevice *dev, int hwpart);
};
#define blk_get_ops(dev) ((struct blk_ops *)(dev)->driver->ops)
unsigned long blk_derase(struct blk_desc *block_dev, lbaint_t start,
lbaint_t blkcnt);
+/**
+ * blk_find_device() - Find a block device
+ *
+ * This function does not activate the device. The device will be returned
+ * whether or not it is activated.
+ *
+ * @if_type: Interface type (enum if_type_t)
+ * @devnum: Device number (specific to each interface type)
+ * @devp: the device, if found
+ * @return 0 if found, -ENODEV if no device found, or other -ve error value
+ */
+int blk_find_device(int if_type, int devnum, struct udevice **devp);
+
/**
* blk_get_device() - Find and probe a block device ready for use
*
* @if_type: Interface type (enum if_type_t)
* @devnum: Device number (specific to each interface type)
* @devp: the device, if found
- * @return - if found, -ENODEV if no device found, or other -ve error value
+ * @return 0 if found, -ENODEV if no device found, or other -ve error value
*/
int blk_get_device(int if_type, int devnum, struct udevice **devp);
* @devnum: Device number, specific to the interface type, or -1 to
* allocate the next available number
* @blksz: Block size of the device in bytes (typically 512)
- * @size: Total size of the device in bytes
+ * @lba: Total number of blocks of the device
* @devp: the new device (which has not been probed)
*/
int blk_create_device(struct udevice *parent, const char *drv_name,
const char *name, int if_type, int devnum, int blksz,
- lbaint_t size, struct udevice **devp);
+ lbaint_t lba, struct udevice **devp);
/**
- * blk_prepare_device() - Prepare a block device for use
- *
- * This reads partition information from the device if supported.
+ * blk_create_devicef() - Create a new named block device
*
- * @dev: Device to prepare
- * @return 0 if ok, -ve on error
+ * @parent: Parent of the new device
+ * @drv_name: Driver name to use for the block device
+ * @name: Name for the device (parent name is prepended)
+ * @if_type: Interface type (enum if_type_t)
+ * @devnum: Device number, specific to the interface type, or -1 to
+ * allocate the next available number
+ * @blksz: Block size of the device in bytes (typically 512)
+ * @lba: Total number of blocks of the device
+ * @devp: the new device (which has not been probed)
*/
-int blk_prepare_device(struct udevice *dev);
+int blk_create_devicef(struct udevice *parent, const char *drv_name,
+ const char *name, int if_type, int devnum, int blksz,
+ lbaint_t lba, struct udevice **devp);
/**
* blk_unbind_all() - Unbind all device of the given interface type
*/
int blk_find_max_devnum(enum if_type if_type);
+/**
+ * blk_next_free_devnum() - get the next device number for an interface type
+ *
+ * Finds the next number that is safe to use for a newly allocated device for
+ * an interface type @if_type.
+ *
+ * @if_type: Interface type to scan
+ * @return next device number safe to use, or -ve on error
+ */
+int blk_next_free_devnum(enum if_type if_type);
+
+/**
+ * blk_select_hwpart() - select a hardware partition
+ *
+ * Select a hardware partition if the device supports it (typically MMC does)
+ *
+ * @dev: Device to update
+ * @hwpart: Partition number to select
+ * @return 0 if OK, -ve on error
+ */
+int blk_select_hwpart(struct udevice *dev, int hwpart);
+
+/**
+ * blk_get_from_parent() - obtain a block device by looking up its parent
+ *
+ * All devices with
+ */
+int blk_get_from_parent(struct udevice *parent, struct udevice **devp);
+
+/**
+ * blk_get_by_device() - Get the block device descriptor for the given device
+ * @dev: Instance of a storage device
+ *
+ * Return: With block device descriptor on success , NULL if there is no such
+ * block device.
+ */
+struct blk_desc *blk_get_by_device(struct udevice *dev);
+
#else
#include <errno.h>
/*
*/
int blk_select_hwpart_devnum(enum if_type if_type, int devnum, int hwpart);
+/**
+ * blk_get_if_type_name() - Get the name of an interface type
+ *
+ * @if_type: Interface type to check
+ * @return name of interface, or NULL if none
+ */
+const char *blk_get_if_type_name(enum if_type if_type);
+
+/**
+ * blk_common_cmd() - handle common commands with block devices
+ *
+ * @args: Number of arguments to the command (argv[0] is the command itself)
+ * @argv: Command arguments
+ * @if_type: Interface type
+ * @cur_devnump: Current device number for this interface type
+ * @return 0 if OK, CMD_RET_ERROR on error
+ */
+int blk_common_cmd(int argc, char *const argv[], enum if_type if_type,
+ int *cur_devnump);
+
#endif
projects / oweals / u-boot.git / blobdiff