mmc: fsl_esdhc: Fix SDR104 and HS200 support

[oweals/u-boot.git] / include / ata.h

diff --git a/include/ata.h b/include/ata.h
index dde377c99ec92423093733c24008c1508ddcd915..3d870c973f2c0bf53fc2615cfeaa39a7076e20b2 100644 (file)
--- a/include/ata.h
+++ b/include/ata.h
@@ -1,17 +1,13 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * (C) Copyright 2000
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 /*
  * Most of the following information was derived from the document
- * "Information Technology - AT Attachment-3 Interface (ATA-3)"
- * which can be found at:
- * http://www.dt.wdc.com/ata/ata-3/ata3r5v.zip
- * ftp://poctok.iae.nsk.su/pub/asm/Documents/IDE/ATA3R5V.ZIP
- * ftp://ftp.fee.vutbr.cz/pub/doc/io/ata/ata-3/ata3r5v.zip
+ * "Information Technology - AT Attachment-3 Interface (ATA-3)",
+ * ANSI X3.298-1997.
  */
 
 #ifndef        _ATA_H
@@ -71,43 +67,9 @@
 #endif /* ATA_DEVICE */
 #define ATA_LBA                0xE0
 
-/*
- * ATA Commands (only mandatory commands listed here)
- */
-#define ATA_CMD_READ   0x20    /* Read Sectors (with retries)  */
-#define ATA_CMD_READN  0x21    /* Read Sectors ( no  retries)  */
-#define ATA_CMD_WRITE  0x30    /* Write Sectores (with retries)*/
-#define ATA_CMD_WRITEN 0x31    /* Write Sectors  ( no  retries)*/
-#define ATA_CMD_VRFY   0x40    /* Read Verify  (with retries)  */
-#define ATA_CMD_VRFYN  0x41    /* Read verify  ( no  retries)  */
-#define ATA_CMD_SEEK   0x70    /* Seek                         */
-#define ATA_CMD_DIAG   0x90    /* Execute Device Diagnostic    */
-#define ATA_CMD_INIT   0x91    /* Initialize Device Parameters */
-#define ATA_CMD_RD_MULT        0xC4    /* Read Multiple                */
-#define ATA_CMD_WR_MULT        0xC5    /* Write Multiple               */
-#define ATA_CMD_SETMULT        0xC6    /* Set Multiple Mode            */
-#define ATA_CMD_RD_DMA 0xC8    /* Read DMA (with retries)      */
-#define ATA_CMD_RD_DMAN        0xC9    /* Read DMS ( no  retries)      */
-#define ATA_CMD_WR_DMA 0xCA    /* Write DMA (with retries)     */
-#define ATA_CMD_WR_DMAN        0xCB    /* Write DMA ( no  retires)     */
-#define ATA_CMD_IDENT  0xEC    /* Identify Device              */
-#define ATA_CMD_SETF   0xEF    /* Set Features                 */
-#define ATA_CMD_CHK_PWR        0xE5    /* Check Power Mode             */
-
-#define ATA_CMD_READ_EXT 0x24  /* Read Sectors (with retries)  with 48bit addressing */
-#define ATA_CMD_WRITE_EXT      0x34    /* Write Sectores (with retries) with 48bit addressing */
-#define ATA_CMD_VRFY_EXT       0x42    /* Read Verify  (with retries)  with 48bit addressing */
-
-#define ATA_CMD_FLUSH 0xE7 /* Flush drive cache */
-#define ATA_CMD_FLUSH_EXT 0xEA /* Flush drive cache, with 48bit addressing */
-
 /*
  * ATAPI Commands
  */
-#define ATAPI_CMD_IDENT 0xA1 /* Identify AT Atachment Packed Interface Device */
-#define ATAPI_CMD_PACKET 0xA0 /* Packed Command */
-
-
 #define ATAPI_CMD_INQUIRY 0x12
 #define ATAPI_CMD_REQ_SENSE 0x03
 #define ATAPI_CMD_READ_CAP 0x25