Merge branch 'next'

[oweals/u-boot.git] / examples / standalone / README.smc91111_eeprom

diff --git a/examples/standalone/README.smc91111_eeprom b/examples/standalone/README.smc91111_eeprom
index f73a8d3a581bb6d167a2473787996f4ae3e67f48..0d8bc63f322509560453b03eab3d8b8234e0414c 100644 (file)
--- a/examples/standalone/README.smc91111_eeprom
+++ b/examples/standalone/README.smc91111_eeprom
@@ -7,14 +7,14 @@ EEPROMs.
 
 Contents:
 ------------------------
-1. Ensuring U-boot's MAC address can be set in hardware
+1. Ensuring U-Boot's MAC address can be set in hardware
 2. Running the smc91111_eeprom program
 3. Setting MAC addresses
 4. Other things you can do with this
 5. Things to be done.
 
 
-1. Ensuring U-boot's MAC address can be set in hardware
+1. Ensuring U-Boot's MAC address can be set in hardware
 --------------------------------------------------------------------------
 
 On the Internet - MAC addresses are very important. Short for Media
@@ -130,14 +130,14 @@ SMC91111>
 The MAC address can be stored in four locations:
 
 -Boot environmental variable in Flash <- can not change, without
-                                         re-flashing U-boot.
+                                         re-flashing U-Boot.
 U-Boot environmental variable         <- can not change, without
                                          resetting board/U-Boot
 LAN91C111 Registers                   <- volatile
 LAN91C111 EEPROM                      <- Non-volatile
 
 If you have not activated the network, and do not have a hardcoded
-or pre-assigned MAC address in U-boot, the environmental variables
+or pre-assigned MAC address in U-Boot, the environmental variables
 should be blank, and allow you to set things one time.
 
 To set the EEPROM MAC address to 12:34:56:78:9A:BC