common: Drop linux/delay.h from common header

[oweals/u-boot.git] / drivers / usb / host / ehci-mx5.c

diff --git a/drivers/usb/host/ehci-mx5.c b/drivers/usb/host/ehci-mx5.c
index f43c38da6178ebe5d45db800737f2fc9b208b88a..212b3623325d4ebda9aa797457de6547e031e601 100644 (file)
--- a/drivers/usb/host/ehci-mx5.c
+++ b/drivers/usb/host/ehci-mx5.c
@@ -1,26 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
  * Copyright (C) 2010 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- * for more details.
  */
 
 #include <common.h>
+#include <log.h>
 #include <usb.h>
 #include <errno.h>
 #include <linux/compiler.h>
-#include <usb/ehci-fsl.h>
+#include <linux/delay.h>
+#include <usb/ehci-ci.h>
 #include <asm/io.h>
 #include <asm/arch/imx-regs.h>
 #include <asm/arch/clock.h>
+#include <dm.h>
+#include <power/regulator.h>
 
 #include "ehci.h"
 
@@ -226,24 +221,29 @@ void __weak board_ehci_hcd_postinit(struct usb_ehci *ehci, int port)
 {
 }
 
-int ehci_hcd_init(int index, struct ehci_hccr **hccr, struct ehci_hcor **hcor)
+__weak void mx5_ehci_powerup_fixup(struct ehci_ctrl *ctrl, uint32_t *status_reg,
+                                  uint32_t *reg)
 {
-       struct usb_ehci *ehci;
-#ifdef CONFIG_MX53
-       struct clkctl *sc_regs = (struct clkctl *)CCM_BASE_ADDR;
-       u32 reg;
+       mdelay(50);
+}
 
-       reg = __raw_readl(&sc_regs->cscmr1) & ~(1 << 26);
-       /* derive USB PHY clock multiplexer from PLL3 */
-       reg |= 1 << 26;
-       __raw_writel(reg, &sc_regs->cscmr1);
-#endif
+#if !CONFIG_IS_ENABLED(DM_USB)
+static const struct ehci_ops mx5_ehci_ops = {
+       .powerup_fixup          = mx5_ehci_powerup_fixup,
+};
+
+int ehci_hcd_init(int index, enum usb_init_type init,
+               struct ehci_hccr **hccr, struct ehci_hcor **hcor)
+{
+       struct usb_ehci *ehci;
 
+       /* The only user for this is efikamx-usb */
+       ehci_set_controller_priv(index, NULL, &mx5_ehci_ops);
        set_usboh3_clk();
-       enable_usboh3_clk(1);
+       enable_usboh3_clk(true);
        set_usb_phy_clk();
-       enable_usb_phy1_clk(1);
-       enable_usb_phy2_clk(1);
+       enable_usb_phy1_clk(true);
+       enable_usb_phy2_clk(true);
        mdelay(1);
 
        /* Do board specific initialization */
@@ -272,3 +272,103 @@ int ehci_hcd_stop(int index)
 {
        return 0;
 }
+#else /* CONFIG_IS_ENABLED(DM_USB) */
+struct ehci_mx5_priv_data {
+       struct ehci_ctrl ctrl;
+       struct usb_ehci *ehci;
+       struct udevice *vbus_supply;
+       enum usb_init_type init_type;
+       int portnr;
+};
+
+static const struct ehci_ops mx5_ehci_ops = {
+       .powerup_fixup          = mx5_ehci_powerup_fixup,
+};
+
+static int ehci_usb_ofdata_to_platdata(struct udevice *dev)
+{
+       struct usb_platdata *plat = dev_get_platdata(dev);
+       const char *mode;
+
+       mode = fdt_getprop(gd->fdt_blob, dev_of_offset(dev), "dr_mode", NULL);
+       if (mode) {
+               if (strcmp(mode, "peripheral") == 0)
+                       plat->init_type = USB_INIT_DEVICE;
+               else if (strcmp(mode, "host") == 0)
+                       plat->init_type = USB_INIT_HOST;
+               else
+                       return -EINVAL;
+       }
+
+       return 0;
+}
+
+static int ehci_usb_probe(struct udevice *dev)
+{
+       struct usb_platdata *plat = dev_get_platdata(dev);
+       struct usb_ehci *ehci = (struct usb_ehci *)devfdt_get_addr(dev);
+       struct ehci_mx5_priv_data *priv = dev_get_priv(dev);
+       enum usb_init_type type = plat->init_type;
+       struct ehci_hccr *hccr;
+       struct ehci_hcor *hcor;
+       int ret;
+
+       set_usboh3_clk();
+       enable_usboh3_clk(true);
+       set_usb_phy_clk();
+       enable_usb_phy1_clk(true);
+       enable_usb_phy2_clk(true);
+       mdelay(1);
+
+       priv->ehci = ehci;
+       priv->portnr = dev->seq;
+       priv->init_type = type;
+
+       ret = device_get_supply_regulator(dev, "vbus-supply",
+                                         &priv->vbus_supply);
+       if (ret)
+               debug("%s: No vbus supply\n", dev->name);
+
+       if (!ret && priv->vbus_supply) {
+               ret = regulator_set_enable(priv->vbus_supply,
+                                          (type == USB_INIT_DEVICE) ?
+                                          false : true);
+               if (ret) {
+                       puts("Error enabling VBUS supply\n");
+                       return ret;
+               }
+       }
+
+       hccr = (struct ehci_hccr *)((uint32_t)&ehci->caplength);
+       hcor = (struct ehci_hcor *)((uint32_t)hccr +
+                       HC_LENGTH(ehci_readl(&(hccr)->cr_capbase)));
+       setbits_le32(&ehci->usbmode, CM_HOST);
+
+       __raw_writel(CONFIG_MXC_USB_PORTSC, &ehci->portsc);
+       setbits_le32(&ehci->portsc, USB_EN);
+
+       mxc_set_usbcontrol(priv->portnr, CONFIG_MXC_USB_FLAGS);
+       mdelay(10);
+
+       return ehci_register(dev, hccr, hcor, &mx5_ehci_ops, 0,
+                            priv->init_type);
+}
+
+static const struct udevice_id mx5_usb_ids[] = {
+       { .compatible = "fsl,imx53-usb" },
+       { }
+};
+
+U_BOOT_DRIVER(usb_mx5) = {
+       .name   = "ehci_mx5",
+       .id     = UCLASS_USB,
+       .of_match = mx5_usb_ids,
+       .ofdata_to_platdata = ehci_usb_ofdata_to_platdata,
+       .probe  = ehci_usb_probe,
+       .remove = ehci_deregister,
+       .ops    = &ehci_usb_ops,
+       .platdata_auto_alloc_size = sizeof(struct usb_platdata),
+       .priv_auto_alloc_size = sizeof(struct ehci_mx5_priv_data),
+       .flags  = DM_FLAG_ALLOC_PRIV_DMA,
+};
+#endif /* !CONFIG_IS_ENABLED(DM_USB) */