+// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2006-2009 Freescale Semiconductor, Inc.
*
* Dave Liu <daveliu@freescale.com>
* based on source code of Shlomi Gridish
- *
- * SPDX-License-Identifier: GPL-2.0+
*/
-#include "common.h"
+#include <common.h>
+#include <malloc.h>
#include <command.h>
-#include "asm/errno.h"
-#include "asm/io.h"
-#include "linux/immap_qe.h"
-#include "qe.h"
+#include <linux/errno.h>
+#include <asm/io.h>
+#include <linux/immap_qe.h>
+#include <fsl_qe.h>
+#include <mmc.h>
+#include <u-boot/crc.h>
+
+#ifdef CONFIG_ARCH_LS1021A
+#include <asm/arch/immap_ls102xa.h>
+#endif
+#ifdef CONFIG_ARM64
+#include <asm/armv8/mmu.h>
+#include <asm/arch/cpu.h>
+#endif
#define MPC85xx_DEVDISR_QE_DISABLE 0x1
qe_map_t *qe_immr = NULL;
+#ifdef CONFIG_QE
static qe_snum_t snums[QE_NUM_OF_SNUM];
+#endif
DECLARE_GLOBAL_DATA_PTR;
return (void *)&qe_immr->muram[offset];
}
+#ifdef CONFIG_QE
static void qe_sdma_init(void)
{
volatile sdma_t *p;
*/
static u8 thread_snum[] = {
/* Evthreads 16-29 are not supported in MPC8309 */
-#if !defined(CONFIG_MPC8309)
+#if !defined(CONFIG_ARCH_MPC8309)
0x04, 0x05, 0x0c, 0x0d,
0x14, 0x15, 0x1c, 0x1d,
0x24, 0x25, 0x2c, 0x2d,
}
}
+#ifdef CONFIG_TFABOOT
+void qe_init(uint qe_base)
+{
+ enum boot_src src = get_boot_src();
+
+ /* Init the QE IMMR base */
+ qe_immr = (qe_map_t *)qe_base;
+
+ if (src == BOOT_SOURCE_IFC_NOR) {
+ /*
+ * Upload microcode to IRAM for those SOCs
+ * which do not have ROM in QE.
+ */
+ qe_upload_firmware((const void *)(CONFIG_SYS_QE_FW_ADDR +
+ CONFIG_SYS_FSL_IFC_BASE));
+
+ /* enable the microcode in IRAM */
+ out_be32(&qe_immr->iram.iready, QE_IRAM_READY);
+ }
+
+ gd->arch.mp_alloc_base = QE_DATAONLY_BASE;
+ gd->arch.mp_alloc_top = gd->arch.mp_alloc_base + QE_DATAONLY_SIZE;
+
+ qe_sdma_init();
+ qe_snums_init();
+}
+#else
void qe_init(uint qe_base)
{
/* Init the QE IMMR base */
qe_sdma_init();
qe_snums_init();
}
+#endif
+#endif
#ifdef CONFIG_U_QE
+#ifdef CONFIG_TFABOOT
void u_qe_init(void)
{
- uint qe_base = CONFIG_SYS_IMMR + 0x01400000; /* QE immr base */
- qe_immr = (qe_map_t *)qe_base;
+ enum boot_src src = get_boot_src();
+
+ qe_immr = (qe_map_t *)(CONFIG_SYS_IMMR + QE_IMMR_OFFSET);
- u_qe_upload_firmware((const void *)CONFIG_SYS_QE_FW_ADDR);
- out_be32(&qe_immr->iram.iready, QE_IRAM_READY);
+ void *addr = (void *)CONFIG_SYS_QE_FW_ADDR;
+
+ if (src == BOOT_SOURCE_IFC_NOR)
+ addr = (void *)(CONFIG_SYS_QE_FW_ADDR + CONFIG_SYS_FSL_IFC_BASE);
+
+ if (src == BOOT_SOURCE_QSPI_NOR)
+ addr = (void *)(CONFIG_SYS_QE_FW_ADDR + CONFIG_SYS_FSL_QSPI_BASE);
+
+ if (src == BOOT_SOURCE_SD_MMC) {
+ int dev = CONFIG_SYS_MMC_ENV_DEV;
+ u32 cnt = CONFIG_SYS_QE_FMAN_FW_LENGTH / 512;
+ u32 blk = CONFIG_SYS_QE_FW_ADDR / 512;
+
+ if (mmc_initialize(gd->bd)) {
+ printf("%s: mmc_initialize() failed\n", __func__);
+ return;
+ }
+ addr = malloc(CONFIG_SYS_QE_FMAN_FW_LENGTH);
+ struct mmc *mmc = find_mmc_device(CONFIG_SYS_MMC_ENV_DEV);
+
+ if (!mmc) {
+ free(addr);
+ printf("\nMMC cannot find device for ucode\n");
+ } else {
+ printf("\nMMC read: dev # %u, block # %u, count %u ...\n",
+ dev, blk, cnt);
+ mmc_init(mmc);
+ (void)blk_dread(mmc_get_blk_desc(mmc), blk, cnt,
+ addr);
+ }
+ }
+ if (!u_qe_upload_firmware(addr))
+ out_be32(&qe_immr->iram.iready, QE_IRAM_READY);
+ if (src == BOOT_SOURCE_SD_MMC)
+ free(addr);
+}
+#else
+void u_qe_init(void)
+{
+ qe_immr = (qe_map_t *)(CONFIG_SYS_IMMR + QE_IMMR_OFFSET);
+
+ void *addr = (void *)CONFIG_SYS_QE_FW_ADDR;
+#ifdef CONFIG_SYS_QE_FMAN_FW_IN_MMC
+ int dev = CONFIG_SYS_MMC_ENV_DEV;
+ u32 cnt = CONFIG_SYS_QE_FMAN_FW_LENGTH / 512;
+ u32 blk = CONFIG_SYS_QE_FW_ADDR / 512;
+
+ if (mmc_initialize(gd->bd)) {
+ printf("%s: mmc_initialize() failed\n", __func__);
+ return;
+ }
+ addr = malloc(CONFIG_SYS_QE_FMAN_FW_LENGTH);
+ struct mmc *mmc = find_mmc_device(CONFIG_SYS_MMC_ENV_DEV);
+
+ if (!mmc) {
+ free(addr);
+ printf("\nMMC cannot find device for ucode\n");
+ } else {
+ printf("\nMMC read: dev # %u, block # %u, count %u ...\n",
+ dev, blk, cnt);
+ mmc_init(mmc);
+ (void)blk_dread(mmc_get_blk_desc(mmc), blk, cnt,
+ addr);
+ }
+#endif
+ if (!u_qe_upload_firmware(addr))
+ out_be32(&qe_immr->iram.iready, QE_IRAM_READY);
+#ifdef CONFIG_SYS_QE_FMAN_FW_IN_MMC
+ free(addr);
+#endif
+}
+#endif
+#endif
+
+#ifdef CONFIG_U_QE
+void u_qe_resume(void)
+{
+ qe_map_t *qe_immrr;
+
+ qe_immrr = (qe_map_t *)(CONFIG_SYS_IMMR + QE_IMMR_OFFSET);
+ u_qe_firmware_resume((const void *)CONFIG_SYS_QE_FW_ADDR, qe_immrr);
+ out_be32(&qe_immrr->iram.iready, QE_IRAM_READY);
}
#endif
(u8) QE_CR_PROTOCOL_UNSPECIFIED, 0);
}
+#ifdef CONFIG_QE
void qe_assign_page(uint snum, uint para_ram_base)
{
u32 cecr;
return;
}
+#endif
/*
* brg: 0~15 as BRG1~BRG16
if (ucode->major || ucode->minor || ucode->revision)
printf("QE: uploading microcode '%s' version %u.%u.%u\n",
- ucode->id, ucode->major, ucode->minor, ucode->revision);
+ (char *)ucode->id, (u16)ucode->major, (u16)ucode->minor,
+ (u16)ucode->revision);
else
- printf("QE: uploading microcode '%s'\n", ucode->id);
+ printf("QE: uploading microcode '%s'\n", (char *)ucode->id);
/* Use auto-increment */
out_be32(&qe_immr->iram.iadd, be32_to_cpu(ucode->iram_offset) |
/*
* Upload a microcode to the I-RAM at a specific address.
*
- * See docs/README.qe_firmware for information on QE microcode uploading.
+ * See Documentation/powerpc/qe_firmware.rst in the Linux kernel tree for
+ * information on QE microcode uploading.
*
* Currently, only version 1 is supported, so the 'version' field must be
* set to 1.
size_t length;
const struct qe_header *hdr;
#ifdef CONFIG_DEEP_SLEEP
+#ifdef CONFIG_ARCH_LS1021A
+ struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR;
+#else
ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+#endif
#endif
if (!firmware) {
printf("Invalid address\n");
* saved microcode information and put in the new.
*/
memset(&qe_firmware_info, 0, sizeof(qe_firmware_info));
- strcpy(qe_firmware_info.id, (char *)firmware->id);
+ strncpy(qe_firmware_info.id, (char *)firmware->id, 62);
qe_firmware_info.extended_modes = firmware->extended_modes;
memcpy(qe_firmware_info.vtraps, firmware->vtraps,
sizeof(firmware->vtraps));
/*
* Upload a microcode to the I-RAM at a specific address.
*
- * See docs/README.qe_firmware for information on QE microcode uploading.
+ * See Documentation/powerpc/qe_firmware.rst in the Linux kernel tree for
+ * information on QE microcode uploading.
*
* Currently, only version 1 is supported, so the 'version' field must be
* set to 1.
size_t length;
const struct qe_header *hdr;
#ifdef CONFIG_DEEP_SLEEP
+#ifdef CONFIG_ARCH_LS1021A
+ struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR;
+#else
ccsr_gur_t __iomem *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+#endif
#endif
if (!firmware) {
printf("Invalid address\n");
}
#endif
+#ifdef CONFIG_U_QE
+int u_qe_firmware_resume(const struct qe_firmware *firmware, qe_map_t *qe_immrr)
+{
+ unsigned int i;
+ unsigned int j;
+ const struct qe_header *hdr;
+ const u32 *code;
+#ifdef CONFIG_DEEP_SLEEP
+#ifdef CONFIG_PPC
+ ccsr_gur_t __iomem *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+#else
+ struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR;
+#endif
+#endif
+
+ if (!firmware)
+ return -EINVAL;
+
+ hdr = &firmware->header;
+
+ /* Check the magic */
+ if ((hdr->magic[0] != 'Q') || (hdr->magic[1] != 'E') ||
+ (hdr->magic[2] != 'F')) {
+#ifdef CONFIG_DEEP_SLEEP
+ setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_QE_DISABLE);
+#endif
+ return -EPERM;
+ }
+
+ /*
+ * If the microcode calls for it, split the I-RAM.
+ */
+ if (!firmware->split) {
+ out_be16(&qe_immrr->cp.cercr,
+ in_be16(&qe_immrr->cp.cercr) | QE_CP_CERCR_CIR);
+ }
+
+ /* Loop through each microcode. */
+ for (i = 0; i < firmware->count; i++) {
+ const struct qe_microcode *ucode = &firmware->microcode[i];
+
+ /* Upload a microcode if it's present */
+ if (!ucode->code_offset)
+ return 0;
+
+ code = (const void *)firmware + be32_to_cpu(ucode->code_offset);
+
+ /* Use auto-increment */
+ out_be32(&qe_immrr->iram.iadd, be32_to_cpu(ucode->iram_offset) |
+ QE_IRAM_IADD_AIE | QE_IRAM_IADD_BADDR);
+
+ for (i = 0; i < be32_to_cpu(ucode->count); i++)
+ out_be32(&qe_immrr->iram.idata, be32_to_cpu(code[i]));
+
+ /* Program the traps for this processor */
+ for (j = 0; j < 16; j++) {
+ u32 trap = be32_to_cpu(ucode->traps[j]);
+
+ if (trap)
+ out_be32(&qe_immrr->rsp[i].tibcr[j], trap);
+ }
+
+ /* Enable traps */
+ out_be32(&qe_immrr->rsp[i].eccr, be32_to_cpu(ucode->eccr));
+ }
+
+ return 0;
+}
+#endif
+
struct qe_firmware_info *qe_get_firmware_info(void)
{
return qe_firmware_uploaded ? &qe_firmware_info : NULL;
}
-static int qe_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+static int qe_cmd(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[])
{
ulong addr;
projects / oweals / u-boot.git / blobdiff