arm: dra7: Set fastboot variables in environment

[oweals/u-boot.git] / drivers / pcmcia / mpc8xx_pcmcia.c

diff --git a/drivers/pcmcia/mpc8xx_pcmcia.c b/drivers/pcmcia/mpc8xx_pcmcia.c
index 95ea5e999f518b6e0918613842b18ab1b07c1188..dae5560f8cd9b05c61c53a10b5d6070d653a0c1c 100644 (file)
--- a/drivers/pcmcia/mpc8xx_pcmcia.c
+++ b/drivers/pcmcia/mpc8xx_pcmcia.c
@@ -1,8 +1,7 @@
 #include <common.h>
-#if defined(CONFIG_8xx)
 #include <mpc8xx.h>
-#endif
 #include <pcmcia.h>
+#include <linux/compiler.h>
 
 #undef CONFIG_PCMCIA
 
@@ -10,11 +9,11 @@
 #define        CONFIG_PCMCIA
 #endif
 
-#if defined(CONFIG_CMD_IDE) && defined(CONFIG_IDE_8xx_PCCARD)
+#if defined(CONFIG_IDE) && defined(CONFIG_IDE_8xx_PCCARD)
 #define        CONFIG_PCMCIA
 #endif
 
-#if defined(CONFIG_8xx)        && defined(CONFIG_PCMCIA)
+#if defined(CONFIG_PCMCIA)
 
 #if    defined(CONFIG_IDE_8xx_PCCARD)
 extern int check_ide_device (int slot);
@@ -59,21 +58,9 @@ static const u_int m8xx_size_to_gray[M8XX_SIZES_NO] =
 
 /* -------------------------------------------------------------------- */
 
-#ifdef CONFIG_HMI10
-#define        HMI10_FRAM_TIMING       (       PCMCIA_SHT(2)   \
-                               |       PCMCIA_SST(2)   \
-                               |       PCMCIA_SL(4))
-#endif
-
-#if    defined(CONFIG_LWMON) || defined(CONFIG_NSCU)
-#define        CONFIG_SYS_PCMCIA_TIMING        (       PCMCIA_SHT(9)   \
-                               |       PCMCIA_SST(3)   \
-                               |       PCMCIA_SL(12))
-#else
 #define        CONFIG_SYS_PCMCIA_TIMING        (       PCMCIA_SHT(2)   \
                                |       PCMCIA_SST(4)   \
                                |       PCMCIA_SL(9))
-#endif
 
 /* -------------------------------------------------------------------- */
 
@@ -81,8 +68,8 @@ int pcmcia_on (void)
 {
        u_long reg, base;
        pcmcia_win_t *win;
-       u_int slotbit;
        u_int rc, slot;
+       __maybe_unused u_int slotbit;
        int i;
 
        debug ("Enable PCMCIA " PCMCIA_SLOT_MSG "\n");
@@ -108,17 +95,6 @@ int pcmcia_on (void)
                switch (i) {
 #ifdef CONFIG_IDE_8xx_PCCARD
                case 4:
-#ifdef CONFIG_HMI10
-               {       /* map FRAM area */
-                       win->or = (     PCMCIA_BSIZE_256K
-                               |       PCMCIA_PPS_8
-                               |       PCMCIA_PRS_ATTR
-                               |       slotbit
-                               |       PCMCIA_PV
-                               |       HMI10_FRAM_TIMING );
-                       break;
-               }
-#endif
                case 0: {       /* map attribute memory */
                        win->or = (     PCMCIA_BSIZE_64M
                                |       PCMCIA_PPS_8
@@ -149,18 +125,6 @@ int pcmcia_on (void)
                        break;
                }
 #endif /* CONFIG_IDE_8xx_PCCARD */
-#ifdef CONFIG_HMI10
-               case 3: {       /* map I/O window for 4xUART data/ctrl */
-                       win->br += 0x40000;
-                       win->or = (     PCMCIA_BSIZE_256K
-                               |       PCMCIA_PPS_8
-                               |       PCMCIA_PRS_IO
-                               |       slotbit
-                               |       PCMCIA_PV
-                               |       CONFIG_SYS_PCMCIA_TIMING );
-                       break;
-               }
-#endif /* CONFIG_HMI10 */
                default:        /* set to not valid */
                        win->or = 0;
                        break;
@@ -241,16 +205,6 @@ static u_int m8xx_get_graycode(u_int size)
 
 #if    0
 
-#if    defined(CONFIG_RPXCLASSIC) || defined(CONFIG_RPXLITE)
-
-/* The RPX boards seems to have it's bus monitor timeout set to 6*8 clocks.
- * SYPCR is write once only, therefore must the slowest memory be faster
- * than the bus monitor or we will get a machine check due to the bus timeout.
- */
-#undef PCMCIA_BMT_LIMIT
-#define        PCMCIA_BMT_LIMIT (6*8)
-#endif
-
 static u_int m8xx_get_speed(u_int ns, u_int is_io)
 {
        u_int reg, clocks, psst, psl, psht;
@@ -301,4 +255,4 @@ static u_int m8xx_get_speed(u_int ns, u_int is_io)
 }
 #endif /* 0 */
 
-#endif /* CONFIG_8xx && CONFIG_PCMCIA */
+#endif /* CONFIG_PCMCIA */