+// SPDX-License-Identifier: GPL-2.0+
/*
* rtl8169.c : U-Boot driver for the RealTek RTL8169
*
/**************************************************************************
* r8169.c: Etherboot device driver for the RealTek RTL-8169 Gigabit
* Written 2003 by Timothy Legge <tlegge@rogers.com>
-*
- * SPDX-License-Identifier: GPL-2.0+
*
* Portions of this code based on:
* r8169.c: A RealTek RTL-8169 Gigabit Ethernet driver
* Modified to use le32_to_cpu and cpu_to_le32 properly
*/
#include <common.h>
+#include <cpu_func.h>
#include <dm.h>
#include <errno.h>
#include <malloc.h>
#define RTL_R16(reg) readw(ioaddr + (reg))
#define RTL_R32(reg) readl(ioaddr + (reg))
-#define ETH_FRAME_LEN MAX_ETH_FRAME_SIZE
-#define ETH_ALEN MAC_ADDR_LEN
-#define ETH_ZLEN 60
-
#define bus_to_phys(a) pci_mem_to_phys((pci_dev_t)(unsigned long)dev->priv, \
(pci_addr_t)(unsigned long)a)
#define phys_to_bus(a) pci_phys_to_mem((pci_dev_t)(unsigned long)dev->priv, \
{"RTL-8168/8111g", 0x4c, 0xff7e1880,},
{"RTL-8101e", 0x34, 0xff7e1880,},
{"RTL-8100e", 0x32, 0xff7e1880,},
+ {"RTL-8168h/8111h", 0x54, 0xff7e1880,},
};
enum _DescStatusBit {
*/
#if RTL8169_DESC_SIZE < ARCH_DMA_MINALIGN
#if !defined(CONFIG_SYS_NONCACHED_MEMORY) && \
- !defined(CONFIG_SYS_DCACHE_OFF) && !defined(CONFIG_X86)
+ !CONFIG_IS_ENABLED(SYS_DCACHE_OFF) && !defined(CONFIG_X86)
#warning cache-line size is larger than descriptor size
#endif
#endif
static struct rtl8169_private *tpc;
-static const u16 rtl8169_intr_mask =
- SYSErr | PCSTimeout | RxUnderrun | RxOverflow | RxFIFOOver | TxErr |
- TxOK | RxErr | RxOK;
static const unsigned int rtl8169_rx_config =
(RX_FIFO_THRESH << RxCfgFIFOShift) | (RX_DMA_BURST << RxCfgDMAShift);
/* point to the current txb incase multiple tx_rings are used */
ptxb = tpc->Tx_skbuff[entry * MAX_ETH_FRAME_SIZE];
memcpy(ptxb, (char *)packet, (int)length);
- rtl_flush_buffer(ptxb, length);
while (len < ETH_ZLEN)
ptxb[len++] = '\0';
+ rtl_flush_buffer(ptxb, ALIGN(len, RTL8169_ALIGN));
+
tpc->TxDescArray[entry].buf_Haddr = 0;
#ifdef CONFIG_DM_ETH
tpc->TxDescArray[entry].buf_addr = cpu_to_le32(
}
#endif
+#ifdef CONFIG_DM_ETH
+static int rtl8169_write_hwaddr(struct udevice *dev)
+{
+ struct eth_pdata *plat = dev_get_platdata(dev);
+ unsigned int i;
+
+ RTL_W8(Cfg9346, Cfg9346_Unlock);
+
+ for (i = 0; i < MAC_ADDR_LEN; i++)
+ RTL_W8(MAC0 + i, plat->enetaddr[i]);
+
+ RTL_W8(Cfg9346, Cfg9346_Lock);
+
+ return 0;
+}
+#endif
+
/**************************************************************************
INIT - Look for an adapter, this routine's visible to the outside
***************************************************************************/
.send = rtl8169_eth_send,
.recv = rtl8169_eth_recv,
.stop = rtl8169_eth_stop,
+ .write_hwaddr = rtl8169_write_hwaddr,
};
static const struct udevice_id rtl8169_eth_ids[] = {