+/* SPDX-License-Identifier: GPL-2.0+ */
/*******************************************************************************
Copyright(c) 1999 - 2002 Intel Corporation. All rights reserved.
Copyright 2011 Freescale Semiconductor, Inc.
- * SPDX-License-Identifier: GPL-2.0+
-
Contact Information:
Linux NICS <linux.nics@intel.com>
Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
#ifndef _E1000_HW_H_
#define _E1000_HW_H_
-#include <common.h>
#include <linux/list.h>
#include <malloc.h>
#include <net.h>
+/* Avoids a compile error since struct eth_device is not defined */
+#ifndef CONFIG_DM_ETH
#include <netdev.h>
+#endif
#include <asm/io.h>
#include <pci.h>
#endif
#ifdef CONFIG_E1000_SPI
-int do_e1000_spi(cmd_tbl_t *cmdtp, struct e1000_hw *hw,
- int argc, char * const argv[]);
+int do_e1000_spi(struct cmd_tbl *cmdtp, struct e1000_hw *hw,
+ int argc, char *const argv[]);
#endif
/* Enumerated types specific to the e1000 hardware */
e1000_82574,
e1000_80003es2lan,
e1000_ich8lan,
+ e1000_igb,
e1000_num_macs
} e1000_mac_type;
e1000_eeprom_flash,
e1000_eeprom_ich8,
e1000_eeprom_none, /* No NVM support */
+ e1000_eeprom_invm,
e1000_num_eeprom_types
} e1000_eeprom_type;
e1000_phy_gg82563,
e1000_phy_igp_3,
e1000_phy_ife,
+ e1000_phy_igb,
e1000_phy_bm,
e1000_phy_undefined = 0xFF
} e1000_phy_type;
#define ENET_HEADER_SIZE 14
#define MAXIMUM_ETHERNET_FRAME_SIZE 1518 /* With FCS */
#define MINIMUM_ETHERNET_FRAME_SIZE 64 /* With FCS */
-#define ETHERNET_FCS_SIZE 4
#define MAXIMUM_ETHERNET_PACKET_SIZE \
- (MAXIMUM_ETHERNET_FRAME_SIZE - ETHERNET_FCS_SIZE)
+ (MAXIMUM_ETHERNET_FRAME_SIZE - ETH_FCS_LEN)
#define MINIMUM_ETHERNET_PACKET_SIZE \
- (MINIMUM_ETHERNET_FRAME_SIZE - ETHERNET_FCS_SIZE)
-#define CRC_LENGTH ETHERNET_FCS_SIZE
+ (MINIMUM_ETHERNET_FRAME_SIZE - ETH_FCS_LEN)
+#define CRC_LENGTH ETH_FCS_LEN
#define MAX_JUMBO_FRAME_SIZE 0x3F00
/* 802.1q VLAN Packet Sizes */
#define E1000_CTRL 0x00000 /* Device Control - RW */
#define E1000_STATUS 0x00008 /* Device Status - RO */
#define E1000_EECD 0x00010 /* EEPROM/Flash Control - RW */
+#define E1000_I210_EECD 0x12010 /* EEPROM/Flash Control - RW */
#define E1000_EERD 0x00014 /* EEPROM Read - RW */
+#define E1000_I210_EERD 0x12014 /* EEPROM Read - RW */
#define E1000_CTRL_EXT 0x00018 /* Extended Device Control - RW */
#define E1000_MDIC 0x00020 /* MDI Control - RW */
#define E1000_FCAL 0x00028 /* Flow Control Address Low - RW */
#define E1000_ICS 0x000C8 /* Interrupt Cause Set - WO */
#define E1000_IMS 0x000D0 /* Interrupt Mask Set - RW */
#define E1000_IMC 0x000D8 /* Interrupt Mask Clear - WO */
+#define E1000_I210_IAM 0x000E0 /* Interrupt Ack Auto Mask - RW */
#define E1000_RCTL 0x00100 /* RX Control - RW */
#define E1000_FCTTV 0x00170 /* Flow Control Transmit Timer Value - RW */
#define E1000_TXCW 0x00178 /* TX Configuration Word - RW */
#define E1000_EXTCNF_CTRL 0x00F00 /* Extended Configuration Control */
#define E1000_EXTCNF_SIZE 0x00F08 /* Extended Configuration Size */
#define E1000_PHY_CTRL 0x00F10 /* PHY Control Register in CSR */
+#define E1000_I210_PHY_CTRL 0x00E14 /* PHY Control Register in CSR */
#define FEXTNVM_SW_CONFIG 0x0001
#define E1000_PBA 0x01000 /* Packet Buffer Allocation - RW */
#define E1000_PBS 0x01008 /* Packet Buffer Size */
#define E1000_EEMNGCTL 0x01010 /* MNG EEprom Control */
+#define E1000_I210_EEMNGCTL 0x12030 /* MNG EEprom Control */
#define E1000_FLASH_UPDATES 1000
#define E1000_EEARBC 0x01024 /* EEPROM Auto Read Bus Control */
#define E1000_FLASHT 0x01028 /* FLASH Timer Register */
#define E1000_EEWR 0x0102C /* EEPROM Write Register - RW */
+#define E1000_I210_EEWR 0x12018 /* EEPROM Write Register - RW */
#define E1000_FLSWCTL 0x01030 /* FLASH control register */
#define E1000_FLSWDATA 0x01034 /* FLASH data register */
#define E1000_FLSWCNT 0x01038 /* FLASH Access Counter */
/* Structure containing variables used by the shared code (e1000_hw.c) */
struct e1000_hw {
+ const char *name;
struct list_head list_node;
+#ifndef CONFIG_DM_ETH
struct eth_device *nic;
+#endif
#ifdef CONFIG_E1000_SPI
struct spi_slave spi;
#endif
unsigned int cardnum;
+#ifdef CONFIG_DM_ETH
+ struct udevice *pdev;
+#else
pci_dev_t pdev;
+#endif
uint8_t *hw_addr;
e1000_mac_type mac_type;
e1000_phy_type phy_type;
e1000_media_type media_type;
e1000_fc_type fc;
e1000_bus_type bus_type;
-#if 0
- e1000_bus_speed bus_speed;
- e1000_bus_width bus_width;
- uint32_t io_base;
-#endif
uint32_t asf_firmware_present;
#ifndef CONFIG_E1000_NO_NVM
uint32_t eeprom_semaphore_present;
uint32_t original_fc;
uint32_t txcw;
uint32_t autoneg_failed;
-#if 0
- uint32_t max_frame_size;
- uint32_t min_frame_size;
- uint32_t mc_filter_type;
- uint32_t num_mc_addrs;
- uint32_t collision_delta;
- uint32_t tx_packet_delta;
- uint32_t ledctl_default;
- uint32_t ledctl_mode1;
- uint32_t ledctl_mode2;
-#endif
uint16_t autoneg_advertised;
uint16_t pci_cmd_word;
uint16_t fc_high_water;
uint16_t fc_low_water;
uint16_t fc_pause_time;
-#if 0
- uint16_t current_ifs_val;
- uint16_t ifs_min_val;
- uint16_t ifs_max_val;
- uint16_t ifs_step_size;
- uint16_t ifs_ratio;
-#endif
uint16_t device_id;
uint16_t vendor_id;
uint16_t subsystem_id;
uint8_t forced_speed_duplex;
uint8_t wait_autoneg_complete;
uint8_t dma_fairness;
-#if 0
- uint8_t perm_mac_addr[NODE_ADDRESS_SIZE];
-#endif
bool disable_polarity_correction;
bool speed_downgraded;
bool get_link_status;
bool report_tx_early;
bool phy_reset_disable;
bool initialize_hw_bits_disable;
-#if 0
- bool adaptive_ifs;
- bool ifs_params_forced;
- bool in_ifs_mode;
-#endif
e1000_smart_speed smart_speed;
e1000_dsp_config dsp_config_state;
};
#define E1000_STATUS_BUS64 0x00001000 /* In 64 bit slot */
#define E1000_STATUS_PCIX_MODE 0x00002000 /* PCI-X mode */
#define E1000_STATUS_PCIX_SPEED 0x0000C000 /* PCI-X bus speed */
+#define E1000_STATUS_PF_RST_DONE 0x00200000 /* PCI-X bus speed */
/* Constants used to intrepret the masked PCI-X bus speed. */
#define E1000_STATUS_PCIX_SPEED_66 0x00000000 /* PCI-X bus speed 50-66 MHz */
#define E1000_EECD_SELSHAD 0x00020000 /* Select Shadow RAM */
#define E1000_EECD_INITSRAM 0x00040000 /* Initialize Shadow RAM */
#define E1000_EECD_FLUPD 0x00080000 /* Update FLASH */
+#define E1000_EECD_FLUPD_I210 0x00800000 /* Update FLASH */
+#define E1000_EECD_FLUDONE_I210 0x04000000 /* Update FLASH done*/
+#define E1000_FLUDONE_ATTEMPTS 20000
#define E1000_EECD_AUPDEN 0x00100000 /* Enable Autonomous FLASH update */
#define E1000_EECD_SHADV 0x00200000 /* Shadow RAM Data Valid */
#define E1000_EECD_SEC1VAL 0x00400000 /* Sector One Valid */
#define BME1000_E_PHY_ID 0x01410CB0
+#define I210_I_PHY_ID 0x01410C00
+
/* Miscellaneous PHY bit definitions. */
#define PHY_PREAMBLE 0xFFFFFFFF
#define PHY_SOF 0x01
#define MII_CR_SPEED_100 0x2000
#define MII_CR_SPEED_10 0x0000
#define E1000_PHY_ADDRESS 0x01
-#define PHY_AUTO_NEG_TIME 45 /* 4.5 Seconds */
+#define PHY_AUTO_NEG_TIME 80 /* 8.0 Seconds */
#define PHY_FORCE_TIME 20 /* 2.0 Seconds */
#define PHY_REVISION_MASK 0xFFFFFFF0
#define DEVICE_SPEED_MASK 0x00000300 /* Device Ctrl Reg Speed Mask */
projects / oweals / u-boot.git / blobdiff