mtd: rename CONFIG_MTD -> CONFIG_DM_MTD

[oweals/u-boot.git] / drivers / mtd / Kconfig

diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig
index 19579801d246190d5a0df7e489ce06dcb612d616..fe3127334ea16691b5cbf63bba50f0f83027c8a2 100644 (file)
--- a/drivers/mtd/Kconfig
+++ b/drivers/mtd/Kconfig
@@ -1,6 +1,9 @@
 menu "MTD Support"
 
-config MTD
+config MTD_PARTITIONS
+       bool
+
+config DM_MTD
        bool "Enable Driver Model for MTD drivers"
        depends on DM
        help
@@ -13,9 +16,25 @@ config MTD_NOR_FLASH
        help
          Enable support for parallel NOR flash.
 
+config MTD_DEVICE
+       bool "Enable MTD Device for NAND and ONENAND devices"
+       help
+         Adds the MTD device infrastructure from the Linux kernel.
+         Needed for mtdparts command support.
+
+config FLASH_CFI_DRIVER
+       bool "Enable CFI Flash driver"
+       help
+         The Common Flash Interface specification was developed by Intel,
+         AMD and other flash manufactures. It provides a universal method
+         for probing the capabilities of flash devices. If you wish to
+         support any device that is CFI-compliant, you need to enable this
+         option. Visit <http://www.amd.com/products/nvd/overview/cfi.html>
+         for more information on CFI.
+
 config CFI_FLASH
        bool "Enable Driver Model for CFI Flash driver"
-       depends on MTD
+       depends on DM_MTD
        help
          The Common Flash Interface specification was developed by Intel,
          AMD and other flash manufactures. It provides a universal method
@@ -24,9 +43,37 @@ config CFI_FLASH
          option. Visit <http://www.amd.com/products/nvd/overview/cfi.html>
          for more information on CFI.
 
+config SYS_FLASH_USE_BUFFER_WRITE
+       bool "Enable buffered writes to flash"
+       depends on FLASH_CFI_DRIVER
+       help
+         Use buffered writes to flash.
+
+config FLASH_CFI_MTD
+       bool "Enable CFI MTD driver"
+       depends on FLASH_CFI_DRIVER
+       help
+         This option enables the building of the cfi_mtd driver
+         in the drivers directory. The driver exports CFI flash
+         to the MTD layer.
+
+config SYS_FLASH_PROTECTION
+       bool "Use hardware flash protection"
+       depends on FLASH_CFI_DRIVER
+       help
+         If defined, hardware flash sectors protection is used
+         instead of U-Boot software protection.
+
+config SYS_FLASH_CFI
+       bool "Define extra elements in CFI for flash geometry"
+       depends on FLASH_CFI_DRIVER
+       help
+         Define if the flash driver uses extra elements in the
+         common flash structure for storing flash geometry.
+
 config ALTERA_QSPI
        bool "Altera Generic Quad SPI Controller"
-       depends on MTD
+       depends on DM_MTD
        help
          This enables access to Altera EPCQ/EPCS flash chips using the
          Altera Generic Quad SPI Controller. The controller converts SPI
@@ -35,15 +82,29 @@ config ALTERA_QSPI
 
 config FLASH_PIC32
        bool "Microchip PIC32 Flash driver"
-       depends on MACH_PIC32 && MTD
+       depends on MACH_PIC32 && DM_MTD
        help
          This enables access to Microchip PIC32 internal non-CFI flash
          chips through PIC32 Non-Volatile-Memory Controller.
 
-endmenu
+config RENESAS_RPC_HF
+       bool "Renesas RCar Gen3 RPC Hyperflash driver"
+       depends on RCAR_GEN3 && DM_MTD
+       help
+         This enables access to Hyperflash memory through the Renesas
+         RCar Gen3 RPC controller.
+
+config HBMC_AM654
+       bool "HyperBus controller driver for AM65x SoC"
+       depends on SYSCON
+       help
+        This is the driver for HyperBus controller on TI's AM65x and
+        other SoCs
 
 source "drivers/mtd/nand/Kconfig"
 
 source "drivers/mtd/spi/Kconfig"
 
 source "drivers/mtd/ubi/Kconfig"
+
+endmenu