+// SPDX-License-Identifier: GPL-2.0
/*
* Copyright 2008-2012 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * Version 2 as published by the Free Software Foundation.
*/
#include <common.h>
+#include <log.h>
#include <asm/io.h>
#include <fsl_ddr_sdram.h>
#include <asm/processor.h>
+#include <linux/delay.h>
#if (CONFIG_CHIP_SELECTS_PER_CTRL > 4)
#error Invalid setting for CONFIG_CHIP_SELECTS_PER_CTRL
#endif
-
/*
* regs has the to-be-set values for DDR controller registers
* ctrl_num is the DDR controller number
unsigned int csn_bnds_backup = 0, cs_sa, cs_ea, *csn_bnds_t;
int csn = -1;
#endif
+#ifdef CONFIG_SYS_FSL_ERRATUM_DDR_A003
+ u32 save1, save2;
+#endif
switch (ctrl_num) {
case 0:
ddr = (void *)CONFIG_SYS_FSL_DDR_ADDR;
break;
-#if defined(CONFIG_SYS_FSL_DDR2_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 1)
+#if defined(CONFIG_SYS_FSL_DDR2_ADDR) && (CONFIG_SYS_NUM_DDR_CTLRS > 1)
case 1:
ddr = (void *)CONFIG_SYS_FSL_DDR2_ADDR;
break;
#endif
-#if defined(CONFIG_SYS_FSL_DDR3_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 2)
+#if defined(CONFIG_SYS_FSL_DDR3_ADDR) && (CONFIG_SYS_NUM_DDR_CTLRS > 2)
case 2:
ddr = (void *)CONFIG_SYS_FSL_DDR3_ADDR;
break;
#endif
-#if defined(CONFIG_SYS_FSL_DDR4_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 3)
+#if defined(CONFIG_SYS_FSL_DDR4_ADDR) && (CONFIG_SYS_NUM_DDR_CTLRS > 3)
case 3:
ddr = (void *)CONFIG_SYS_FSL_DDR4_ADDR;
break;
out_be32(&ddr->timing_cfg_0, regs->timing_cfg_0);
out_be32(&ddr->timing_cfg_1, regs->timing_cfg_1);
out_be32(&ddr->timing_cfg_2, regs->timing_cfg_2);
- out_be32(&ddr->sdram_cfg_2, regs->ddr_sdram_cfg_2);
out_be32(&ddr->sdram_mode, regs->ddr_sdram_mode);
out_be32(&ddr->sdram_mode_2, regs->ddr_sdram_mode_2);
out_be32(&ddr->sdram_mode_3, regs->ddr_sdram_mode_3);
out_be32(&ddr->sdram_interval, regs->ddr_sdram_interval);
out_be32(&ddr->sdram_data_init, regs->ddr_data_init);
out_be32(&ddr->sdram_clk_cntl, regs->ddr_sdram_clk_cntl);
- out_be32(&ddr->init_addr, regs->ddr_init_addr);
- out_be32(&ddr->init_ext_addr, regs->ddr_init_ext_addr);
-
out_be32(&ddr->timing_cfg_4, regs->timing_cfg_4);
out_be32(&ddr->timing_cfg_5, regs->timing_cfg_5);
out_be32(&ddr->ddr_zq_cntl, regs->ddr_zq_cntl);
out_be32(&ddr->ddr_sdram_rcw_1, regs->ddr_sdram_rcw_1);
out_be32(&ddr->ddr_sdram_rcw_2, regs->ddr_sdram_rcw_2);
out_be32(&ddr->ddr_cdr1, regs->ddr_cdr1);
- out_be32(&ddr->ddr_cdr2, regs->ddr_cdr2);
+#ifdef CONFIG_DEEP_SLEEP
+ if (is_warm_boot()) {
+ out_be32(&ddr->sdram_cfg_2,
+ regs->ddr_sdram_cfg_2 & ~SDRAM_CFG2_D_INIT);
+ out_be32(&ddr->init_addr, CONFIG_SYS_SDRAM_BASE);
+ out_be32(&ddr->init_ext_addr, DDR_INIT_ADDR_EXT_UIA);
+
+ /* DRAM VRef will not be trained */
+ out_be32(&ddr->ddr_cdr2,
+ regs->ddr_cdr2 & ~DDR_CDR2_VREF_TRAIN_EN);
+ } else
+#endif
+ {
+ out_be32(&ddr->sdram_cfg_2, regs->ddr_sdram_cfg_2);
+ out_be32(&ddr->init_addr, regs->ddr_init_addr);
+ out_be32(&ddr->init_ext_addr, regs->ddr_init_ext_addr);
+ out_be32(&ddr->ddr_cdr2, regs->ddr_cdr2);
+ }
out_be32(&ddr->err_disable, regs->err_disable);
out_be32(&ddr->err_int_en, regs->err_int_en);
for (i = 0; i < 32; i++) {
out_be32(&ddr->debug[i], regs->debug[i]);
}
}
-#ifdef CONFIG_SYS_FSL_ERRATUM_A_004934
- out_be32(&ddr->debug[28], 0x30003000);
-#endif
#ifdef CONFIG_SYS_FSL_ERRATUM_DDR_A003474
out_be32(&ddr->debug[12], 0x00000015);
out_be32(&ddr->ddr_wrlvl_cntl, regs->ddr_wrlvl_cntl & 0x7fffffff);
out_be32(&ddr->sdram_cfg_2, regs->ddr_sdram_cfg_2 & 0xffffffeb);
out_be32(&ddr->mtcr, 0);
+ save1 = in_be32(&ddr->debug[12]);
+ save2 = in_be32(&ddr->debug[21]);
out_be32(&ddr->debug[12], 0x00000015);
out_be32(&ddr->debug[21], 0x24000000);
out_be32(&ddr->sdram_interval, regs->ddr_sdram_interval & 0xffff);
0x04000000 |
MD_CNTL_WRCW |
MD_CNTL_MD_VALUE(0x02));
+#if (CONFIG_DIMM_SLOTS_PER_CTLR == 2)
+ if (!(regs->cs[2].config & SDRAM_CS_CONFIG_EN))
+ break;
+ while (in_be32(&ddr->sdram_md_cntl) & MD_CNTL_MD_EN)
+ ;
+ out_be32(&ddr->sdram_md_cntl,
+ MD_CNTL_MD_EN |
+ MD_CNTL_CS_SEL_CS2_CS3 |
+ 0x04000000 |
+ MD_CNTL_WRCW |
+ MD_CNTL_MD_VALUE(0x02));
+#endif
break;
case 0x00100000:
out_be32(&ddr->sdram_md_cntl,
0x04000000 |
MD_CNTL_WRCW |
MD_CNTL_MD_VALUE(0x0a));
+#if (CONFIG_DIMM_SLOTS_PER_CTLR == 2)
+ if (!(regs->cs[2].config & SDRAM_CS_CONFIG_EN))
+ break;
+ while (in_be32(&ddr->sdram_md_cntl) & MD_CNTL_MD_EN)
+ ;
+ out_be32(&ddr->sdram_md_cntl,
+ MD_CNTL_MD_EN |
+ MD_CNTL_CS_SEL_CS2_CS3 |
+ 0x04000000 |
+ MD_CNTL_WRCW |
+ MD_CNTL_MD_VALUE(0x0a));
+#endif
break;
case 0x00200000:
out_be32(&ddr->sdram_md_cntl,
0x04000000 |
MD_CNTL_WRCW |
MD_CNTL_MD_VALUE(0x12));
+#if (CONFIG_DIMM_SLOTS_PER_CTLR == 2)
+ if (!(regs->cs[2].config & SDRAM_CS_CONFIG_EN))
+ break;
+ while (in_be32(&ddr->sdram_md_cntl) & MD_CNTL_MD_EN)
+ ;
+ out_be32(&ddr->sdram_md_cntl,
+ MD_CNTL_MD_EN |
+ MD_CNTL_CS_SEL_CS2_CS3 |
+ 0x04000000 |
+ MD_CNTL_WRCW |
+ MD_CNTL_MD_VALUE(0x12));
+#endif
break;
case 0x00300000:
out_be32(&ddr->sdram_md_cntl,
0x04000000 |
MD_CNTL_WRCW |
MD_CNTL_MD_VALUE(0x1a));
+#if (CONFIG_DIMM_SLOTS_PER_CTLR == 2)
+ if (!(regs->cs[2].config & SDRAM_CS_CONFIG_EN))
+ break;
+ while (in_be32(&ddr->sdram_md_cntl) & MD_CNTL_MD_EN)
+ ;
+ out_be32(&ddr->sdram_md_cntl,
+ MD_CNTL_MD_EN |
+ MD_CNTL_CS_SEL_CS2_CS3 |
+ 0x04000000 |
+ MD_CNTL_WRCW |
+ MD_CNTL_MD_VALUE(0x1a));
+#endif
break;
default:
out_be32(&ddr->sdram_md_cntl,
0x04000000 |
MD_CNTL_WRCW |
MD_CNTL_MD_VALUE(0x02));
+#if (CONFIG_DIMM_SLOTS_PER_CTLR == 2)
+ if (!(regs->cs[2].config & SDRAM_CS_CONFIG_EN))
+ break;
+ while (in_be32(&ddr->sdram_md_cntl) & MD_CNTL_MD_EN)
+ ;
+ out_be32(&ddr->sdram_md_cntl,
+ MD_CNTL_MD_EN |
+ MD_CNTL_CS_SEL_CS2_CS3 |
+ 0x04000000 |
+ MD_CNTL_WRCW |
+ MD_CNTL_MD_VALUE(0x02));
+#endif
printf("Unsupported RC10\n");
break;
}
out_be32(&ddr->ddr_zq_cntl, regs->ddr_zq_cntl);
out_be32(&ddr->ddr_wrlvl_cntl, regs->ddr_wrlvl_cntl);
out_be32(&ddr->sdram_cfg_2, regs->ddr_sdram_cfg_2);
- out_be32(&ddr->debug[12], 0x0);
- out_be32(&ddr->debug[21], 0x0);
+ out_be32(&ddr->debug[12], save1);
+ out_be32(&ddr->debug[21], save2);
out_be32(&ddr->sdram_interval, regs->ddr_sdram_interval);
}
udelay(500);
asm volatile("sync;isync");
+#ifdef CONFIG_DEEP_SLEEP
+ if (is_warm_boot()) {
+ /* enter self-refresh */
+ setbits_be32(&ddr->sdram_cfg_2, SDRAM_CFG2_FRC_SR);
+ /* do board specific memory setup */
+ board_mem_sleep_setup();
+ temp_sdram_cfg = (in_be32(&ddr->sdram_cfg) | SDRAM_CFG_BI);
+ } else
+#endif
+ temp_sdram_cfg = (in_be32(&ddr->sdram_cfg) & ~SDRAM_CFG_BI);
+
/* Let the controller go */
- temp_sdram_cfg = in_be32(&ddr->sdram_cfg) & ~SDRAM_CFG_BI;
out_be32(&ddr->sdram_cfg, temp_sdram_cfg | SDRAM_CFG_MEM_EN);
asm volatile("sync;isync");
bus_width = 3 - ((ddr->sdram_cfg & SDRAM_CFG_DBW_MASK)
>> SDRAM_CFG_DBW_SHIFT);
timeout = ((total_gb_size_per_controller << (6 - bus_width)) * 100 /
- (get_ddr_freq(0) >> 20)) << 1;
+ (get_ddr_freq(ctrl_num) >> 20)) << 1;
#ifdef CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134
timeout_save = timeout;
#endif
case 1:
out_be32(&ddr->cs1_bnds, regs->cs[csn].bnds);
break;
+#if CONFIG_CHIP_SELECTS_PER_CTRL > 2
case 2:
out_be32(&ddr->cs2_bnds, regs->cs[csn].bnds);
break;
case 3:
out_be32(&ddr->cs3_bnds, regs->cs[csn].bnds);
break;
+#endif
}
clrbits_be32(&ddr->sdram_cfg, 0x2);
}
#endif /* CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134 */
+#ifdef CONFIG_DEEP_SLEEP
+ if (is_warm_boot())
+ /* exit self-refresh */
+ clrbits_be32(&ddr->sdram_cfg_2, SDRAM_CFG2_FRC_SR);
+#endif
}
projects / oweals / u-boot.git / blobdiff