colibri_imx6: fix video stdout in default environment

[oweals/u-boot.git] / drivers / Makefile

diff --git a/drivers/Makefile b/drivers/Makefile
index 5e3b122769285db78b30ca83b7f73c9dc8809303..94e8c5da170bf8adc7800c859a989dbd4ade3697 100644 (file)
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -1,14 +1,18 @@
 # SPDX-License-Identifier: GPL-2.0+
 
+obj-$(CONFIG_$(SPL_TPL_)CACHE) += cache/
 obj-$(CONFIG_$(SPL_TPL_)CLK) += clk/
 obj-$(CONFIG_$(SPL_TPL_)DM) += core/
+obj-$(CONFIG_$(SPL_TPL_)DFU) += dfu/
 obj-$(CONFIG_$(SPL_TPL_)GPIO_SUPPORT) += gpio/
-obj-$(CONFIG_$(SPL_TPL_)DRIVERS_MISC_SUPPORT) += misc/ sysreset/ firmware/
+obj-$(CONFIG_$(SPL_TPL_)DRIVERS_MISC_SUPPORT) += misc/
+obj-$(CONFIG_$(SPL_TPL_)SYSRESET) += sysreset/
+obj-$(CONFIG_$(SPL_TPL_)FIRMWARE) +=firmware/
 obj-$(CONFIG_$(SPL_TPL_)I2C_SUPPORT) += i2c/
 obj-$(CONFIG_$(SPL_TPL_)INPUT) += input/
 obj-$(CONFIG_$(SPL_TPL_)LED) += led/
 obj-$(CONFIG_$(SPL_TPL_)MMC_SUPPORT) += mmc/
-obj-$(CONFIG_$(SPL_TPL_)NAND_SUPPORT) += mtd/nand/raw/
+obj-y += mtd/
 obj-$(CONFIG_$(SPL_TPL_)PCH_SUPPORT) += pch/
 obj-$(CONFIG_$(SPL_TPL_)PCI) += pci/
 obj-$(CONFIG_$(SPL_TPL_)PHY) += phy/
@@ -16,40 +20,39 @@ obj-$(CONFIG_$(SPL_TPL_)PINCTRL) += pinctrl/
 obj-$(CONFIG_$(SPL_TPL_)RAM) += ram/
 obj-$(CONFIG_$(SPL_TPL_)RTC_SUPPORT) += rtc/
 obj-$(CONFIG_$(SPL_TPL_)SERIAL_SUPPORT) += serial/
-obj-$(CONFIG_$(SPL_TPL_)SPI_FLASH_SUPPORT) += mtd/spi/
 obj-$(CONFIG_$(SPL_TPL_)SPI_SUPPORT) += spi/
 obj-$(CONFIG_$(SPL_TPL_)TIMER) += timer/
 obj-$(CONFIG_$(SPL_TPL_)VIRTIO) += virtio/
 obj-$(CONFIG_$(SPL_)DM_MAILBOX) += mailbox/
 obj-$(CONFIG_$(SPL_)REMOTEPROC) += remoteproc/
 obj-$(CONFIG_$(SPL_TPL_)TPM) += tpm/
+obj-$(CONFIG_$(SPL_TPL_)ACPI_PMC) += power/acpi_pmc/
+obj-$(CONFIG_$(SPL_)BOARD) += board/
 
 ifndef CONFIG_TPL_BUILD
 ifdef CONFIG_SPL_BUILD
 
 obj-$(CONFIG_SPL_BOOTCOUNT_LIMIT) += bootcount/
+obj-$(CONFIG_SPL_CACHE_SUPPORT) += cache/
 obj-$(CONFIG_SPL_CPU_SUPPORT) += cpu/
 obj-$(CONFIG_SPL_CRYPTO_SUPPORT) += crypto/
 obj-$(CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT) += ddr/fsl/
 obj-$(CONFIG_ARMADA_38X) += ddr/marvell/a38x/
 obj-$(CONFIG_ARMADA_XP) += ddr/marvell/axp/
-obj-$(CONFIG_ALTERA_SDRAM) += ddr/altera/
+obj-$(CONFIG_$(SPL_)ALTERA_SDRAM) += ddr/altera/
+obj-$(CONFIG_ARCH_IMX8M) += ddr/imx/imx8m/
 obj-$(CONFIG_SPL_POWER_SUPPORT) += power/ power/pmic/
 obj-$(CONFIG_SPL_POWER_SUPPORT) += power/regulator/
 obj-$(CONFIG_SPL_POWER_DOMAIN) += power/domain/
 obj-$(CONFIG_SPL_DM_RESET) += reset/
-obj-$(CONFIG_SPL_MTD_SUPPORT) += mtd/
-obj-$(CONFIG_SPL_ONENAND_SUPPORT) += mtd/onenand/
-obj-$(CONFIG_SPL_UBI) += mtd/ubispl/
-obj-$(CONFIG_SPL_DMA_SUPPORT) += dma/
+obj-$(CONFIG_SPL_DMA) += dma/
 obj-$(CONFIG_SPL_ETH_SUPPORT) += net/
 obj-$(CONFIG_SPL_ETH_SUPPORT) += net/phy/
 obj-$(CONFIG_SPL_USB_ETHER) += net/phy/
 obj-$(CONFIG_SPL_MUSB_NEW_SUPPORT) += usb/musb-new/
-obj-$(CONFIG_SPL_USB_GADGET_SUPPORT) += usb/gadget/
-obj-$(CONFIG_SPL_USB_GADGET_SUPPORT) += usb/common/
-obj-$(CONFIG_SPL_USB_GADGET_SUPPORT) += usb/gadget/udc/
-obj-$(CONFIG_SPL_DFU_SUPPORT) += dfu/
+obj-$(CONFIG_SPL_USB_GADGET) += usb/gadget/
+obj-$(CONFIG_SPL_USB_GADGET) += usb/common/
+obj-$(CONFIG_SPL_USB_GADGET) += usb/gadget/udc/
 obj-$(CONFIG_SPL_WATCHDOG_SUPPORT) += watchdog/
 obj-$(CONFIG_SPL_USB_HOST_SUPPORT) += usb/host/
 obj-$(CONFIG_OMAP_USB_PHY) += usb/phy/
@@ -74,44 +77,47 @@ obj-y += ata/
 obj-$(CONFIG_DM_DEMO) += demo/
 obj-$(CONFIG_BIOSEMU) += bios_emulator/
 obj-y += block/
-obj-y += board/
 obj-$(CONFIG_BOOTCOUNT_LIMIT) += bootcount/
+obj-y += cache/
 obj-$(CONFIG_CPU) += cpu/
 obj-y += crypto/
 obj-$(CONFIG_FASTBOOT) += fastboot/
-obj-y += firmware/
 obj-$(CONFIG_FPGA) += fpga/
 obj-y += misc/
 obj-$(CONFIG_MMC) += mmc/
 obj-$(CONFIG_NVME) += nvme/
-obj-y += pcmcia/
+obj-$(CONFIG_PCI_ENDPOINT) += pci_endpoint/
 obj-y += dfu/
-obj-$(CONFIG_X86) += pch/
+obj-$(CONFIG_PCH) += pch/
 obj-y += phy/allwinner/
 obj-y += phy/marvell/
+obj-y += phy/rockchip/
 obj-y += rtc/
 obj-y += scsi/
 obj-y += sound/
 obj-y += spmi/
-obj-y += sysreset/
 obj-y += video/
 obj-y += watchdog/
 obj-$(CONFIG_QE) += qe/
 obj-$(CONFIG_U_QE) += qe/
 obj-y += mailbox/
 obj-y += memory/
+obj-y += mtd/
 obj-y += pwm/
 obj-y += reset/
 obj-y += input/
 # SOC specific infrastructure drivers.
 obj-y += smem/
-obj-y += soc/
 obj-y += thermal/
 obj-$(CONFIG_TEE) += tee/
 obj-y += axi/
+obj-y += ufs/
 obj-$(CONFIG_W1) += w1/
 obj-$(CONFIG_W1_EEPROM) += w1-eeprom/
 
 obj-$(CONFIG_MACH_PIC32) += ddr/microchip/
 obj-$(CONFIG_DM_HWSPINLOCK) += hwspinlock/
+obj-$(CONFIG_DM_RNG) += rng/
 endif
+
+obj-y += soc/