dt-bindings: usb: mtk-xhci: Add binding for MediaTek xHCI host controller
[oweals/u-boot.git] / doc / README.video
index 62ac17b0490f96cbbc07665eb6411dfa039aa332..ced35bd2db55dcb3781dd333e909395334e51b59 100644 (file)
@@ -1,8 +1,7 @@
+SPDX-License-Identifier: GPL-2.0+
 /*
  * (C) Copyright 2000
  * Paolo Scaffardi, AIRVENT SAM s.p.a - RIMINI(ITALY), arsenio@tin.it
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 "video-mode" environment variable
@@ -32,13 +31,13 @@ The driver has been tested with the following configurations:
 Example: video-mode=fslfb:1280x1024-32@60,monitor=dvi
 
 
-U-boot sunxi video controller driver
+U-Boot sunxi video controller driver
 ====================================
 
-U-boot supports hdmi and lcd output on Allwinner sunxi SoCs, lcd output
+U-Boot supports hdmi and lcd output on Allwinner sunxi SoCs, lcd output
 requires the CONFIG_VIDEO_LCD_MODE Kconfig value to be set.
 
-The sunxi u-boot driver supports the following video-mode options:
+The sunxi U-Boot driver supports the following video-mode options:
 
 - monitor=[none|dvi|hdmi|lcd|vga|composite-*] - Select the video output to use
  none:     Disable video output.
@@ -76,3 +75,23 @@ The sunxi u-boot driver supports the following video-mode options:
 For example to always use the hdmi connector, even if no cable is inserted,
 using edid info when available and otherwise initalizing it at 1024x768@60Hz,
 use: "setenv video-mode sunxi:1024x768-24@60,monitor=dvi,hpd=0,edid=1".
+
+
+TrueType fonts
+--------------
+
+U-Boot supports the use of antialiased TrueType fonts on some platforms. This
+has been tested in x86, ARMv7 and sandbox.
+
+To enable this, select CONFIG_CONSOLE_TRUETYPE. You can choose between several
+fonts, with CONSOLE_TRUETYPE_NIMBUS being the default.
+
+TrueType support requires floating point at present. On ARMv7 platforms you
+need to disable use of the private libgcc. You can do this by disabling
+CONFIG_USE_PRIVATE_LIBGCC. See chromebook_jerry for an example. Note that this
+increases U-Boot's size by about 70KB at present.
+
+On ARM you should also make sure your toolchain supports hardfp. This is
+normally given in the name of your toolchain, e.g. arm-linux-gnueabihf (hf
+means hardware floating point). You can also run gcc with -v to see if it has
+this option.