doc: rockchip: Document eMMC program steps

[oweals/u-boot.git] / doc / README.sha1

diff --git a/doc/README.sha1 b/doc/README.sha1
index 92dc8fffaea6607d15353ec7e50bd20178e79cdb..f178f3726430854d2748e5ea1230954af6bae46e 100644 (file)
--- a/doc/README.sha1
+++ b/doc/README.sha1
@@ -34,11 +34,11 @@ a) cp the new Image on a position in RAM (here 0x300000)
 
 b) Initialize the SHA1 sum in the Image with 0x00
    The SHA1 sum is stored in Flash at:
-                           CFG_MONITOR_BASE + CFG_MONITOR_LEN + SHA1_SUM_POS
-   for the pcs440ep Flash:       0xfffa0000 +         0x60000 +        -0x20
-                            = 0xffffffe0
-   for the example in RAM:         0x300000 +         0x60000 +        -0x20
-                            = 0x35ffe0
+                          CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN + SHA1_SUM_POS
+   for the pcs440ep Flash:      0xfffa0000 +         0x60000 +        -0x20
+                           = 0xffffffe0
+   for the example in RAM:        0x300000 +         0x60000 +        -0x20
+                           = 0x35ffe0
 
    note: a SHA1 checksum is 20 bytes long.
 
@@ -51,7 +51,8 @@ c) now calculate the SHA1 sum from the memoryrange and write
 
 Now you have a U-Boot-Image for the pcs440ep board with the correct SHA1 sum.
 
-If you do a "./MAKEALL pcs440ep" or a "make all" to get the U-Boot image,
-the correct SHA1 sum will be automagically included in the U-Boot image.
+If you do a "buildman -k pcs440ep" or a "make all" to get the U-Boot image,
+which will be found in ../current/ipam390/ - the correct SHA1 sum will be
+automagically included in the U-Boot image.
 
 Heiko Schocher, 11 Jul 2007