Building
========
-At present 12 RK3288 boards are supported:
+At present 11 RK3288 boards are supported:
- EVB RK3288 - use evb-rk3288 configuration
- - Fennec RK3288 - use fennec-rk3288 configuration
- Firefly RK3288 - use firefly-rk3288 configuration
- Hisense Chromebook - use chromebook_jerry configuration
- Asus C100P Chromebook - use chromebook_minnie configuration
- EVB RK3036 - use evb-rk3036 configuration
- Kylin - use kylin_rk3036 configuration
-Two RK3328 board are supported:
+Two RK3308 boards are supported:
+
+ - EVB RK3308 - use evb-rk3308 configuration
+ - ROC-CC-RK3308 - use roc-cc-rk3308 configuration
+
+Three RK3328 boards are supported:
- EVB RK3328 - use evb-rk3328_defconfig
- Pine64 Rock64 board - use rock64-rk3328_defconfig
+ - Firefly / Libre Computer Project ROC-RK3328-CC board -
+ use roc-cc-rk3328_defconfig
Size RK3399 boards are supported (aarch64):
(or you can use another cross compiler if you prefer)
-2. To build RK3399 board:
+2. To build RK3308 board:
+ - Get the rkbin
+ => git clone https://github.com/rockchip-linux/rkbin.git
+
+ - Compile U-Boot
+ => cd /path/to/u-boot
+ => export BL31=/path/to/rkbin/bin/rk33/rk3308_bl31_v2.22.elf
+ => make roc-cc-rk3308_defconfig
+ => make CROSS_COMPILE=aarch64-linux-gnu- all
+ => ./tools/mkimage -n rk3308 -T rksd -d /path/to/rkbin/bin/rk33/rk3308_ddr_589MHz_uart2_m0_v1.26.bin idbloader.img
+ => cat spl/u-boot-spl.bin >> idbloader.img
+
+3. To build RK3399 board:
Option 1: Package the image with Rockchip miniloader:
use the existing boot ROM code from SPL.
+Writing to the eMMC with USB on ROC-RK3308-CC
+=============================================
+For USB to work you must get your board into Bootrom mode,
+either by erasing the eMMC or short circuit the GND and D0
+on core board.
+
+Connect the board to your computer via tyepc.
+=> rkdeveloptool db rk3308_loader_v1.26.117.bin
+=> rkdeveloptool wl 0x40 idbloader.img
+=> rkdeveloptool wl 0x4000 u-boot.itb
+=> rkdeveloptool rd
+
+Then you will see the boot log from Debug UART at baud rate 1500000:
+DDR Version V1.26
+REGFB: 0x00000032, 0x00000032
+In
+589MHz
+DDR3
+ Col=10 Bank=8 Row=14 Size=256MB
+msch:1
+Returning to boot ROM...
+
+U-Boot SPL 2020.01-rc1-00225-g34b681327f (Nov 14 2019 - 10:58:04 +0800)
+Trying to boot from MMC1
+INFO: Preloader serial: 2
+NOTICE: BL31: v1.3(release):30f1405
+NOTICE: BL31: Built : 17:08:28, Sep 23 2019
+INFO: Lastlog: last=0x100000, realtime=0x102000, size=0x2000
+INFO: ARM GICv2 driver initialized
+INFO: Using opteed sec cpu_context!
+INFO: boot cpu mask: 1
+INFO: plat_rockchip_pmu_init: pd status 0xe b
+INFO: BL31: Initializing runtime services
+WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE will rK
+ERROR: Error initializing runtime service opteed_fast
+INFO: BL31: Preparing for EL3 exit to normal world
+INFO: Entry point address = 0x600000
+INFO: SPSR = 0x3c9
+
+
+U-Boot 2020.01-rc1-00225-g34b681327f (Nov 14 2019 - 10:58:47 +0800)
+
+Model: Firefly ROC-RK3308-CC board
+DRAM: 254 MiB
+MMC: dwmmc@ff480000: 0, dwmmc@ff490000: 1
+rockchip_dnl_key_pressed read adc key val failed
+Net: No ethernet found.
+Hit any key to stop autoboot: 0
+Card did not respond to voltage select!
+switch to partitions #0, OK
+mmc1(part 0) is current device
+Scanning mmc 1:4...
+Found /extlinux/extlinux.conf
+Retrieving file: /extlinux/extlinux.conf
+151 bytes read in 3 ms (48.8 KiB/s)
+1: kernel-mainline
+Retrieving file: /Image
+14737920 bytes read in 377 ms (37.3 MiB/s)
+append: earlycon=uart8250,mmio32,0xff0c0000 console=ttyS2,1500000n8
+Retrieving file: /rk3308-roc-cc.dtb
+28954 bytes read in 4 ms (6.9 MiB/s)
+Flattened Device Tree blob at 01f00000
+Booting using the fdt blob at 0x1f00000
+## Loading Device Tree to 000000000df3a000, end 000000000df44119 ... OK
+
+Starting kernel ...
+[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd042]
+[ 0.000000] Linux version 5.4.0-rc1-00040-g4dc2d508fa47-dirty (andy@B150) (gcc version 6.3.1 20170404 (Linaro GCC 6.3-209
+[ 0.000000] Machine model: Firefly ROC-RK3308-CC board
+[ 0.000000] earlycon: uart8250 at MMIO32 0x00000000ff0c0000 (options '')
+[ 0.000000] printk: bootconsole [uart8250] enabled
+
Booting from an SD card
=======================
cat firefly-rk3288/u-boot-dtb.bin >> out && \
sudo dd if=out of=/dev/sdc seek=64
+Or:
+ ./firefly-rk3288/tools/mkimage -n rk3288 -T rksd -d \
+ firefly-rk3288/spl/u-boot-spl-dtb.bin:firefly-rk3288/u-boot-dtb.bin \
+ out && \
+ sudo dd if=out of=/dev/sdc seek=64
+
If you have an HDMI cable attached you should see a video console.
For evb_rk3036 board:
cat evb-rk3036/u-boot-dtb.bin >> out && \
sudo dd if=out of=/dev/sdc seek=64
+Or:
+ ./evb-rk3036/tools/mkimage -n rk3036 -T rksd -d \
+ evb-rk3036/spl/u-boot-spl.bin:evb-rk3036/u-boot-dtb.bin out && \
+ sudo dd if=out of=/dev/sdc seek=64
+
Note: rk3036 SDMMC and debug uart use the same iomux, so if you boot from SD, the
debug uart must be disabled
To write an image that boots from an SD card (assumed to be /dev/mmcblk0):
- ./tools/mkimage -n rk3288 -T rksd -d ./tpl/u-boot-tpl.bin out &&
- cat ./spl/u-boot-spl-dtb.bin >> out &&
- sudo dd if=out of=/dev/mmcblk0 seek=64 &&
+ sudo dd if=idbloader.img of=/dev/mmcblk0 seek=64 &&
sudo dd if=u-boot-dtb.img of=/dev/mmcblk0 seek=16384
Booting from an SD card on RK3188
For Rock64 rk3328 board the following three parts are required:
TPL, SPL, and the u-boot image tree blob.
- - Create TPL/SPL image
-
- => tools/mkimage -n rk3328 -T rksd -d tpl/u-boot-tpl.bin idbloader.img
- => cat spl/u-boot-spl.bin >> idbloader.img
-
- Write TPL/SPL image at 64 sector
=> sudo dd if=idbloader.img of=/dev/mmcblk0 seek=64
Option 3: Package the image with TPL:
- - Prefix rk3399 header to TPL image
-
- => cd /path/to/u-boot
- => ./tools/mkimage -n rk3399 -T rksd -d tpl/u-boot-tpl-dtb.bin out
-
- - Concatinate tpl with spl
-
- => cd /path/to/u-boot
- => cat ./spl/u-boot-spl-dtb.bin >> out
-
- Write tpl+spl at 64th sector
- => sudo dd if=out of=/dev/sdc seek=64
+ => sudo dd if=idbloader.img of=/dev/sdc seek=64
- Write U-Boot proper at 16384 sector
offset 128KB and the whole image is padded to 4MB which is the SPI flash size.
The position of U-Boot is controlled with this setting in U-Boot:
- #define CONFIG_SYS_SPI_U_BOOT_OFFS (128 << 10)
+ #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000
If you have a Dediprog em100pro connected then you can write the image with:
projects / oweals / u-boot.git / blobdiff