colibri_imx6: fix video stdout in default environment

[oweals/u-boot.git] / doc / README.JFFS2_NAND

diff --git a/doc/README.JFFS2_NAND b/doc/README.JFFS2_NAND
index 5018ae8342597f16f58c02c04355282b13703d65..92fa0f6ea862121545b38e54e0fcd06a6ae23728 100644 (file)
--- a/doc/README.JFFS2_NAND
+++ b/doc/README.JFFS2_NAND
@@ -1,24 +1,8 @@
 JFFS2 NAND support:
 
-To ebable, use the following #define in the board configuration file:
+To enable, use the following #define in the board configuration file:
 
-#define CONFIG_JFFS2_NAND 1
+#define CONFIG_JFFS2_NAND
 
 Configuration of partitions is similar to how this is done in  U-Boot
-for  JFFS2  on top NOR flash. If a single partition is used, it can be
-configured using the following #defines in the configuration file:
-
-#define CONFIG_JFFS2_NAND_DEV 0                        /* nand device jffs2 lives on */
-#define CONFIG_JFFS2_NAND_OFF 0                        /* start of jffs2 partition */
-#define CONFIG_JFFS2_NAND_SIZE 2*1024*1024     /* size of jffs2 partition */
-
-If more than a single partition is desired, the user can define a
-CONFIG_SYS_JFFS_CUSTOM_PART macro and implement a
-
-       struct part_info* jffs2_part_info(int part_num)
-
-function in a board-specific module. An example of such function is
-available in common/cmd_jffs2.c
-
-The default configuration for the DAVE board has a single JFFS2
-partition of 2 MB size.
+for  JFFS2  on top NOR flash.