test/py: test_ut.py: Ensure we use bytes

[oweals/u-boot.git] / configs / zynq_zc770_xm010_defconfig

diff --git a/configs/zynq_zc770_xm010_defconfig b/configs/zynq_zc770_xm010_defconfig
index 7713e5adc39c5baecb3dc6f0bd2ee284459ffd46..fff8ddc3fb3a110b72ab392d0261da0bf94ff8a0 100644 (file)
--- a/configs/zynq_zc770_xm010_defconfig
+++ b/configs/zynq_zc770_xm010_defconfig
@@ -1,22 +1,26 @@
 CONFIG_ARM=y
+CONFIG_SPL_SYS_DCACHE_OFF=y
 CONFIG_ARCH_ZYNQ=y
 CONFIG_SYS_TEXT_BASE=0x4000000
+CONFIG_SPL_STACK_R_ADDR=0x200000
 CONFIG_SPL=y
+CONFIG_DEBUG_UART_BASE=0xe0001000
+CONFIG_DEBUG_UART_CLOCK=50000000
 CONFIG_IDENT_STRING=" Xilinx Zynq ZC770 XM010"
-CONFIG_SPL_STACK_R_ADDR=0x200000
-CONFIG_DEFAULT_DEVICE_TREE="zynq-zc770-xm010"
 CONFIG_DEBUG_UART=y
 CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_CUSTOM_LDSCRIPT=y
+CONFIG_SYS_LDSCRIPT="arch/arm/mach-zynq/u-boot.lds"
 CONFIG_FIT=y
 CONFIG_FIT_SIGNATURE=y
 CONFIG_FIT_VERBOSE=y
-CONFIG_IMAGE_FORMAT_LEGACY=y
-CONFIG_BOOTCOMMAND="run $modeboot || run distro_bootcmd"
-# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_LEGACY_IMAGE_FORMAT=y
+CONFIG_USE_PREBOOT=y
 CONFIG_SPL_STACK_R=y
 CONFIG_SPL_OS_BOOT=y
 CONFIG_SPL_SPI_LOAD=y
-CONFIG_SYS_PROMPT="Zynq> "
+CONFIG_SYS_SPI_U_BOOT_OFFS=0x100000
+# CONFIG_BOOTM_NETBSD is not set
 # CONFIG_CMD_FLASH is not set
 CONFIG_CMD_FPGA_LOADBP=y
 CONFIG_CMD_FPGA_LOADFS=y
@@ -31,6 +35,7 @@ CONFIG_CMD_CACHE=y
 CONFIG_CMD_EXT4_WRITE=y
 # CONFIG_SPL_DOS_PARTITION is not set
 # CONFIG_SPL_EFI_PARTITION is not set
+CONFIG_DEFAULT_DEVICE_TREE="zynq-zc770-xm010"
 CONFIG_ENV_IS_IN_SPI_FLASH=y
 CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_SPL_DM_SEQ_ALIAS=y
@@ -40,7 +45,8 @@ CONFIG_DM_GPIO=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_ZYNQ=y
 CONFIG_SPI_FLASH=y
-CONFIG_SPI_FLASH_BAR=y
+CONFIG_SF_DEFAULT_SPEED=30000000
+CONFIG_SPI_FLASH_ISSI=y
 CONFIG_SPI_FLASH_MACRONIX=y
 CONFIG_SPI_FLASH_SPANSION=y
 CONFIG_SPI_FLASH_STMICRO=y
@@ -49,10 +55,9 @@ CONFIG_SPI_FLASH_WINBOND=y
 CONFIG_PHY_MARVELL=y
 CONFIG_PHY_REALTEK=y
 CONFIG_PHY_XILINX=y
+CONFIG_MII=y
 CONFIG_ZYNQ_GEM=y
 CONFIG_DEBUG_UART_ZYNQ=y
-CONFIG_DEBUG_UART_BASE=0xe0001000
-CONFIG_DEBUG_UART_CLOCK=50000000
 CONFIG_ZYNQ_SERIAL=y
 CONFIG_ZYNQ_SPI=y
 CONFIG_ZYNQ_QSPI=y