colibri_imx7: add addresses required for distro boot

[oweals/u-boot.git] / configs / zc5601_defconfig

diff --git a/configs/zc5601_defconfig b/configs/zc5601_defconfig
index fd208e7752236dd7cafb46239b947438aa0160ca..e8f4736541ef3f89e87b2a00715ab0f806b04b43 100644 (file)
--- a/configs/zc5601_defconfig
+++ b/configs/zc5601_defconfig
@@ -4,6 +4,9 @@ CONFIG_SYS_TEXT_BASE=0x17800000
 CONFIG_SPL_GPIO_SUPPORT=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_ENV_SIZE=0x2000
+CONFIG_ENV_OFFSET=0x0
+CONFIG_SYS_SPI_U_BOOT_OFFS=0x10000
 CONFIG_TARGET_ZC5601=y
 CONFIG_SPL_MMC_SUPPORT=y
 CONFIG_SPL_SERIAL_SUPPORT=y
@@ -12,6 +15,7 @@ CONFIG_SPL=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI_SUPPORT=y
+CONFIG_SPL_TEXT_BASE=0x00908000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,MX6Q"
 CONFIG_BOOTDELAY=3
@@ -19,12 +23,13 @@ CONFIG_BOOTCOMMAND="run findfdt; run distro_bootcmd"
 CONFIG_DEFAULT_FDT_FILE="imx6q-zc5601.dtb"
 CONFIG_BOUNCE_BUFFER=y
 CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_SPL_TEXT_BASE=0x00908000
 CONFIG_SPL_FS_EXT4=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_SPI_LOAD=y
 CONFIG_SPL_WATCHDOG_SUPPORT=y
 CONFIG_CMD_MEMTEST=y
+CONFIG_SYS_MEMTEST_START=0x10000000
+CONFIG_SYS_MEMTEST_END=0x10800000
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
@@ -32,9 +37,11 @@ CONFIG_CMD_SF=y
 CONFIG_CMD_CACHE=y
 CONFIG_CMD_EXT4_WRITE=y
 CONFIG_ENV_IS_IN_MMC=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
 CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_FSL_USDHC=y
+CONFIG_MTD=y
 CONFIG_SPI_FLASH=y
 CONFIG_SF_DEFAULT_BUS=3
 CONFIG_SF_DEFAULT_MODE=0