MIPS: add compile time definition of L2 cache size

[oweals/u-boot.git] / configs / uniphier_v8_defconfig

diff --git a/configs/uniphier_v8_defconfig b/configs/uniphier_v8_defconfig
index 2edc3a953719956fb9ac1b466136fdc5a4c21fdf..3908ff80d6b029e23eda1e5010db2bbe24db2995 100644 (file)
--- a/configs/uniphier_v8_defconfig
+++ b/configs/uniphier_v8_defconfig
@@ -1,47 +1,55 @@
 CONFIG_ARM=y
+CONFIG_POSITION_INDEPENDENT=y
+CONFIG_INIT_SP_RELATIVE=y
 CONFIG_ARM_SMCCC=y
 CONFIG_ARCH_UNIPHIER=y
-CONFIG_SYS_TEXT_BASE=0x84000000
+CONFIG_SYS_TEXT_BASE=0x00000000
 CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_NR_DRAM_BANKS=3
 CONFIG_ARCH_UNIPHIER_V8_MULTI=y
 CONFIG_MICRO_SUPPORT_CARD=y
-CONFIG_DEFAULT_DEVICE_TREE="uniphier-ld20-ref"
 # CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
+CONFIG_BOOTCOMMAND="run ${bootdev}script; run ${bootdev}boot"
+CONFIG_USE_PREBOOT=y
+CONFIG_PREBOOT="env exist ${bootdev}preboot && run ${bootdev}preboot"
 CONFIG_LOGLEVEL=6
-CONFIG_HUSH_PARSER=y
 CONFIG_CMD_CONFIG=y
 CONFIG_CMD_IMLS=y
 # CONFIG_CMD_XIMG is not set
-# CONFIG_CMD_ENV_EXISTS is not set
-# CONFIG_CMD_FPGA is not set
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_GPT=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_TFTPPUT=y
-CONFIG_CMD_PING=y
 CONFIG_CMD_CACHE=y
 CONFIG_CMD_TIME=y
 # CONFIG_CMD_MISC is not set
-CONFIG_CMD_FAT=y
-CONFIG_CMD_FS_GENERIC=y
+CONFIG_CMD_MTDPARTS=y
+CONFIG_MTDIDS_DEFAULT="nand0=uniphier-nand.0"
+CONFIG_MTDPARTS_DEFAULT="mtdparts=uniphier-nand.0:1m(firmware),-(UBI)"
+CONFIG_CMD_UBI=y
+CONFIG_DEFAULT_DEVICE_TREE="uniphier-ld20-ref"
 CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_GPIO_UNIPHIER=y
 CONFIG_MISC=y
 CONFIG_I2C_EEPROM=y
 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=10
+CONFIG_SUPPORT_EMMC_RPMB=y
+CONFIG_SUPPORT_EMMC_BOOT=y
+CONFIG_MMC_HS200_SUPPORT=y
 CONFIG_MMC_UNIPHIER=y
 CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_CADENCE=y
 CONFIG_MMC_SDHCI_SDMA=y
+CONFIG_MMC_SDHCI_CADENCE=y
+CONFIG_FLASH_CFI_DRIVER=y
+CONFIG_SYS_FLASH_CFI=y
 CONFIG_NAND=y
 CONFIG_NAND_DENALI_DT=y
 CONFIG_NAND_DENALI_SPARE_AREA_SKIP_BYTES=8
-CONFIG_NETDEVICES=y
-CONFIG_SMC911X=y
-CONFIG_SMC911X_BASE=0x0
-CONFIG_SMC911X_32_BIT=y
+CONFIG_DM_ETH=y
+CONFIG_SNI_AVE=y
+CONFIG_PINCONF=y
 CONFIG_SYSRESET=y
 CONFIG_SYSRESET_PSCI=y
 CONFIG_USB=y
@@ -51,5 +59,5 @@ CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_GENERIC=y
 CONFIG_USB_DWC3=y
 CONFIG_USB_DWC3_UNIPHIER=y
-CONFIG_USB_STORAGE=y
 CONFIG_PANIC_HANG=y
+CONFIG_FDT_FIXUP_PARTITIONS=y