verdin-imx8mm: Change board phy skew values for our ksz9031

[oweals/u-boot.git] / configs / sfr_nb4-ser_ram_defconfig

diff --git a/configs/sfr_nb4-ser_ram_defconfig b/configs/sfr_nb4-ser_ram_defconfig
index d7c83297317d5abc8a786127230eaca05a64662e..c783eb5563dcd7e9e3f19107505091f70344fc2c 100644 (file)
--- a/configs/sfr_nb4-ser_ram_defconfig
+++ b/configs/sfr_nb4-ser_ram_defconfig
@@ -1,56 +1,63 @@
+CONFIG_MIPS=y
+CONFIG_SYS_TEXT_BASE=0x80010000
+CONFIG_ENV_SIZE=0x2000
+CONFIG_DM_GPIO=y
+CONFIG_NR_DRAM_BANKS=1
 CONFIG_ARCH_BMIPS=y
-CONFIG_BAUDRATE=115200
-CONFIG_BCM6345_CLK=y
-CONFIG_BCM6345_GPIO=y
-CONFIG_BCM6345_SERIAL=y
-CONFIG_BMIPS_BOOT_RAM=y
+CONFIG_SOC_BMIPS_BCM6358=y
 CONFIG_BOARD_SFR_NB4_SER=y
-CONFIG_CFI_FLASH=y
-# CONFIG_CMD_BOOTD is not set
-CONFIG_CMD_BOOTM=y
+# CONFIG_MIPS_BOOT_CMDLINE_LEGACY is not set
+# CONFIG_MIPS_BOOT_ENV_LEGACY is not set
+CONFIG_MIPS_BOOT_FDT=y
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_DISPLAY_CPUINFO=y
+CONFIG_HUSH_PARSER=y
+CONFIG_SYS_PROMPT="NB4-SER # "
 CONFIG_CMD_CPU=y
-# CONFIG_CMD_CRC32 is not set
-# CONFIG_CMD_EDITENV is not set
+CONFIG_CMD_LICENSE=y
+# CONFIG_CMD_BOOTD is not set
 # CONFIG_CMD_ELF is not set
-# CONFIG_CMD_ENV_EXISTS is not set
+# CONFIG_CMD_XIMG is not set
 # CONFIG_CMD_EXPORTENV is not set
-CONFIG_CMD_FLASH=y
-# CONFIG_CMD_FPGA is not set
-# CONFIG_CMD_GPIO is not set
-# CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_IMPORTENV is not set
-CONFIG_CMD_LED=y
-CONFIG_CMD_LICENSE=y
-CONFIG_CMD_LOADB=y
-# CONFIG_CMD_LOADS is not set
+# CONFIG_CMD_EDITENV is not set
+# CONFIG_CMD_SAVEENV is not set
+# CONFIG_CMD_ENV_EXISTS is not set
+# CONFIG_CMD_CRC32 is not set
 CONFIG_CMD_MEMINFO=y
+# CONFIG_CMD_LOADS is not set
+CONFIG_CMD_USB=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
 # CONFIG_CMD_MISC is not set
-# CONFIG_CMD_NET is not set
-# CONFIG_CMD_NFS is not set
-# CONFIG_CMD_SAVEENV is not set
-# CONFIG_CMD_XIMG is not set
 CONFIG_DEFAULT_DEVICE_TREE="sfr,nb4-ser"
-CONFIG_DISPLAY_CPUINFO=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_NET_RANDOM_ETHADDR=y
 # CONFIG_DM_DEVICE_REMOVE is not set
-CONFIG_DM_GPIO=y
-CONFIG_DM_RESET=y
-CONFIG_DM_SERIAL=y
-CONFIG_HUSH_PARSER=y
+CONFIG_BCM6348_IUDMA=y
+CONFIG_BCM6345_GPIO=y
 CONFIG_LED=y
 CONFIG_LED_BCM6358=y
 CONFIG_LED_GPIO=y
-CONFIG_MIPS=y
-# CONFIG_MIPS_BOOT_CMDLINE_LEGACY is not set
-# CONFIG_MIPS_BOOT_ENV_LEGACY is not set
-CONFIG_MIPS_BOOT_FDT=y
-CONFIG_MTD=y
-CONFIG_MTD_DEVICE=y
+CONFIG_DM_MTD=y
 CONFIG_MTD_NOR_FLASH=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_RESET=y
+CONFIG_FLASH_CFI_DRIVER=y
+CONFIG_CFI_FLASH=y
+CONFIG_SYS_FLASH_PROTECTION=y
+CONFIG_SYS_FLASH_CFI=y
+CONFIG_PHY_FIXED=y
+CONFIG_DM_ETH=y
+CONFIG_BCM6348_ETH=y
+CONFIG_PHY=y
+CONFIG_BCM6358_USBH_PHY=y
+CONFIG_DM_RESET=y
 CONFIG_RESET_BCM6345=y
-CONFIG_SOC_BMIPS_BCM6358=y
-# CONFIG_SPL_SERIAL_PRESENT is not set
-# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SYS_PROMPT="NB4-SER # "
-CONFIG_SYS_TEXT_BASE=0x80010000
+CONFIG_DM_SERIAL=y
+CONFIG_BCM6345_SERIAL=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_GENERIC=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_GENERIC=y