Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriq

[oweals/u-boot.git] / configs / sama5d4ek_spiflash_defconfig

diff --git a/configs/sama5d4ek_spiflash_defconfig b/configs/sama5d4ek_spiflash_defconfig
index 026e9bda9e46cb632a6609cef62e64c517e7b404..a7541a22d6470ad91e064eebf60ab62b9f0141ec 100644 (file)
--- a/configs/sama5d4ek_spiflash_defconfig
+++ b/configs/sama5d4ek_spiflash_defconfig
@@ -7,20 +7,22 @@ CONFIG_SPL_GPIO_SUPPORT=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SYS_MALLOC_F_LEN=0x2000
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
 CONFIG_ENV_SIZE=0x2000
 CONFIG_ENV_OFFSET=0x6000
+CONFIG_ENV_SECT_SIZE=0x1000
+CONFIG_SYS_SPI_U_BOOT_OFFS=0x10000
+CONFIG_DM_GPIO=y
+CONFIG_SPL_SERIAL_SUPPORT=y
+CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
 CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_DEBUG_UART_BOARD_INIT=y
 CONFIG_DEBUG_UART_BASE=0xfc00c000
 CONFIG_DEBUG_UART_CLOCK=88000000
-CONFIG_ENV_SECT_SIZE=0x1000
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI_SUPPORT=y
-CONFIG_DEBUG_UART=y
 CONFIG_SPL_TEXT_BASE=0x200000
+CONFIG_DEBUG_UART=y
 CONFIG_ENV_VARS_UBOOT_CONFIG=y
 CONFIG_FIT=y
 CONFIG_SPI_BOOT=y
@@ -29,7 +31,6 @@ CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,768k(uboot)ro,256K(env_redundant),256k(env),512k(dtb),6M(kernel)ro,-(rootfs) rootfstype=ubifs ubi.mtd=6 root=ubi0:rootfs"
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_SPL_SPI_LOAD=y
-CONFIG_SYS_SPI_U_BOOT_OFFS=0x10000
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_BOOTZ=y
 # CONFIG_CMD_IMI is not set
@@ -55,10 +56,10 @@ CONFIG_SPL_CLK=y
 CONFIG_CLK_AT91=y
 CONFIG_AT91_UTMI=y
 CONFIG_AT91_H32MX=y
-CONFIG_DM_GPIO=y
 CONFIG_AT91_GPIO=y
 CONFIG_DM_MMC=y
 CONFIG_GENERIC_ATMEL_MCI=y
+CONFIG_MTD=y
 CONFIG_MTD_RAW_NAND=y
 # CONFIG_SYS_NAND_USE_FLASH_BBT is not set
 CONFIG_NAND_ATMEL=y
@@ -86,4 +87,6 @@ CONFIG_USB_STORAGE=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_ATMEL_USBA=y
 CONFIG_DM_VIDEO=y
+# CONFIG_VIDEO_BPP8 is not set
+# CONFIG_VIDEO_BPP32 is not set
 CONFIG_ATMEL_HLCD=y