MIPS: add compile time definition of L2 cache size

[oweals/u-boot.git] / configs / pcm058_defconfig

diff --git a/configs/pcm058_defconfig b/configs/pcm058_defconfig
index 5684d41e72ce23dae3308d707a8b16e48a4c4b71..879f9932be8cb5819c99c494644988aeb1cf7a2d 100644 (file)
--- a/configs/pcm058_defconfig
+++ b/configs/pcm058_defconfig
@@ -7,23 +7,26 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_TARGET_PCM058=y
 CONFIG_SPL_MMC_SUPPORT=y
 CONFIG_SPL_SERIAL_SUPPORT=y
+CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI_SUPPORT=y
 CONFIG_CMD_HDMIDETECT=y
+CONFIG_SPL_TEXT_BASE=0x00908000
 CONFIG_DISTRO_DEFAULTS=y
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_FIT=y
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,MX6Q"
 CONFIG_BOOTDELAY=3
 # CONFIG_USE_BOOTCOMMAND is not set
 CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_BOUNCE_BUFFER=y
 CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_SPL_DMA_SUPPORT=y
-CONFIG_SPL_EXT_SUPPORT=y
+CONFIG_SPL_FS_EXT4=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_SPI_LOAD=y
+CONFIG_SYS_SPI_U_BOOT_OFFS=0x10000
 CONFIG_SPL_WATCHDOG_SUPPORT=y
 CONFIG_SPL_YMODEM_SUPPORT=y
 # CONFIG_CMD_FLASH is not set
@@ -34,22 +37,26 @@ CONFIG_CMD_NAND_TRIMFFS=y
 CONFIG_CMD_SF=y
 CONFIG_CMD_CACHE=y
 CONFIG_CMD_EXT4_WRITE=y
+CONFIG_CMD_MTDPARTS=y
 CONFIG_MTDIDS_DEFAULT="nand0=nand"
 CONFIG_MTDPARTS_DEFAULT="mtdparts=nand:16m(uboot),1m(env),-(rootfs)"
 CONFIG_CMD_UBI=y
 # CONFIG_SPL_PARTITION_UUIDS is not set
 CONFIG_ENV_IS_IN_SPI_FLASH=y
 CONFIG_DM=y
-CONFIG_FSL_ESDHC=y
+CONFIG_FSL_USDHC=y
 CONFIG_MTD=y
 CONFIG_NAND=y
+CONFIG_SYS_NAND_USE_FLASH_BBT=y
 CONFIG_NAND_MXS=y
 CONFIG_SPI_FLASH=y
+CONFIG_SF_DEFAULT_MODE=0
+CONFIG_SF_DEFAULT_SPEED=20000000
 CONFIG_SPI_FLASH_STMICRO=y
 CONFIG_PHYLIB=y
 CONFIG_PHY_MICREL=y
 CONFIG_PHY_MICREL_KSZ90X1=y
-CONFIG_NETDEVICES=y
+CONFIG_MII=y
 CONFIG_SPI=y
 CONFIG_MXC_SPI=y
 CONFIG_DM_THERMAL=y