stm32mp: stm32prog: add MTD devices support

[oweals/u-boot.git] / configs / medcom-wide_defconfig

diff --git a/configs/medcom-wide_defconfig b/configs/medcom-wide_defconfig
index c3caebb7a6a10328661a9305723c67498ee3bd11..bfca54d857b99ba98990ea1b419c060f44d1e6e1 100644 (file)
--- a/configs/medcom-wide_defconfig
+++ b/configs/medcom-wide_defconfig
@@ -1,36 +1,35 @@
 CONFIG_ARM=y
 CONFIG_TEGRA=y
+CONFIG_SYS_TEXT_BASE=0x00110000
+CONFIG_ENV_SIZE=0x2000
+CONFIG_ENV_OFFSET=0x1FFE0000
+CONFIG_NR_DRAM_BANKS=2
 CONFIG_TEGRA20=y
 CONFIG_TARGET_MEDCOM_WIDE=y
-CONFIG_DEFAULT_DEVICE_TREE="tegra20-medcom-wide"
+CONFIG_SPL_TEXT_BASE=0x00108000
 CONFIG_FIT=y
 CONFIG_OF_SYSTEM_SETUP=y
 CONFIG_SYS_STDIO_DEREGISTER=y
-CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="Tegra20 (Medcom-Wide) # "
-CONFIG_CMD_BOOTZ=y
 # CONFIG_CMD_IMI is not set
-# CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
 CONFIG_CMD_MMC=y
+CONFIG_CMD_NAND=y
 CONFIG_CMD_USB=y
-# CONFIG_CMD_FPGA is not set
-CONFIG_CMD_GPIO=y
 # CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_DHCP=y
 # CONFIG_CMD_NFS is not set
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
 CONFIG_CMD_PMIC=y
 CONFIG_CMD_REGULATOR=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_EXT4=y
 CONFIG_CMD_EXT4_WRITE=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_FS_GENERIC=y
+# CONFIG_SPL_DOS_PARTITION is not set
+# CONFIG_SPL_EFI_PARTITION is not set
+CONFIG_DEFAULT_DEVICE_TREE="tegra20-medcom-wide"
+CONFIG_ENV_IS_IN_NAND=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_SPL_DM=y
-# CONFIG_BLK is not set
-# CONFIG_DM_MMC_OPS is not set
+CONFIG_MTD=y
+CONFIG_MTD_RAW_NAND=y
 CONFIG_DM_PMIC=y
 CONFIG_DM_REGULATOR=y
 CONFIG_DM_REGULATOR_FIXED=y
@@ -38,6 +37,10 @@ CONFIG_PWM_TEGRA=y
 CONFIG_SYS_NS16550=y
 CONFIG_USB=y
 CONFIG_DM_USB=y
-CONFIG_USB_STORAGE=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_TEGRA=y
+CONFIG_USB_HOST_ETHER=y
+CONFIG_USB_ETHER_SMSC95XX=y
 CONFIG_DM_VIDEO=y
+# CONFIG_VIDEO_BPP8 is not set
 CONFIG_VIDEO_TEGRA20=y