Convert CONFIG_BZIP2 et al to Kconfig

[oweals/u-boot.git] / configs / ls1046ardb_emmc_defconfig

diff --git a/configs/ls1046ardb_emmc_defconfig b/configs/ls1046ardb_emmc_defconfig
index ed4e060c64667413e66b614666ba6d7732330687..def9140fd644c3b6853283c5e2e771e36871fb56 100644 (file)
--- a/configs/ls1046ardb_emmc_defconfig
+++ b/configs/ls1046ardb_emmc_defconfig
@@ -3,17 +3,17 @@ CONFIG_TARGET_LS1046ARDB=y
 CONFIG_SYS_TEXT_BASE=0x82000000
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_ENV_SIZE=0x2000
+CONFIG_ENV_OFFSET=0x300000
+CONFIG_DM_GPIO=y
 CONFIG_FSL_LS_PPA=y
 CONFIG_SPL_MMC_SUPPORT=y
 CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_OFFSET=0x300000
 CONFIG_NR_DRAM_BANKS=2
 CONFIG_SPL=y
-CONFIG_AHCI=y
-CONFIG_SPL_FSL_PBL=y
 CONFIG_SPL_TEXT_BASE=0x10000000
+CONFIG_AHCI=y
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
@@ -24,6 +24,7 @@ CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=1550000.spi-0:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)"
 # CONFIG_USE_BOOTCOMMAND is not set
 CONFIG_MISC_INIT_R=y
+CONFIG_SPL_FSL_PBL=y
 CONFIG_SPL_BOARD_INIT=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x110
@@ -31,6 +32,7 @@ CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
 CONFIG_SPL_WATCHDOG_SUPPORT=y
+CONFIG_CMD_DM=y
 CONFIG_CMD_GPT=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
@@ -48,6 +50,7 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_DM=y
 CONFIG_SATA_CEVA=y
 CONFIG_FSL_CAAM=y
+CONFIG_DM_I2C=y
 CONFIG_DM_MMC=y
 CONFIG_FSL_ESDHC=y
 CONFIG_MTD=y
@@ -56,6 +59,9 @@ CONFIG_MTD_RAW_NAND=y
 # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
 CONFIG_PHYLIB=y
 CONFIG_PHY_AQUANTIA=y
+CONFIG_PHY_REALTEK=y
+CONFIG_DM_ETH=y
+CONFIG_DM_MDIO=y
 CONFIG_E1000=y
 CONFIG_FMAN_ENET=y
 CONFIG_PCI=y