dm: spi: Change cs_info op to return -EINVAL for invalid cs num

[oweals/u-boot.git] / configs / bk4r1_defconfig

diff --git a/configs/bk4r1_defconfig b/configs/bk4r1_defconfig
index e3852f4856db063186f51f204894abf9ac108fc2..20d3e33e96e46fe5dcfcde2fba17ae182323a643 100644 (file)
--- a/configs/bk4r1_defconfig
+++ b/configs/bk4r1_defconfig
@@ -3,11 +3,14 @@ CONFIG_SYS_THUMB_BUILD=y
 CONFIG_ARCH_VF610=y
 CONFIG_SYS_TEXT_BASE=0x3f401000
 CONFIG_SYS_MALLOC_F_LEN=0x800
-CONFIG_TARGET_BK4R1=y
 CONFIG_NR_DRAM_BANKS=1
+CONFIG_SYS_BOOTCOUNT_SINGLEWORD=y
+CONFIG_SYS_BOOTCOUNT_ADDR=0x4006e02c
+CONFIG_TARGET_BK4R1=y
 CONFIG_FIT=y
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/phytec/pcm052/imximage.cfg"
 CONFIG_BOOTDELAY=3
+CONFIG_USE_PREBOOT=y
 CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_HUSH_PARSER=y
 # CONFIG_CMD_ELF is not set
@@ -34,22 +37,15 @@ CONFIG_NETCONSOLE=y
 CONFIG_DM=y
 CONFIG_BOOTCOUNT_LIMIT=y
 CONFIG_BOOTCOUNT_BOOTLIMIT=3
-CONFIG_SYS_BOOTCOUNT_SINGLEWORD=y
-CONFIG_SYS_BOOTCOUNT_ADDR=0x4006e02c
 CONFIG_DM_GPIO=y
 CONFIG_VYBRID_GPIO=y
 CONFIG_DM_I2C=y
 CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
 CONFIG_I2C_DEFAULT_BUS_NUMBER=0x2
 CONFIG_SYS_I2C_MXC=y
-CONFIG_SYS_I2C_MXC_I2C1=y
-CONFIG_SYS_I2C_MXC_I2C2=y
-CONFIG_SYS_I2C_MXC_I2C3=y
-CONFIG_SYS_I2C_MXC_I2C4=y
 CONFIG_LED=y
 CONFIG_LED_GPIO=y
 CONFIG_MISC=y
-CONFIG_MXC_OCOTP=y
 CONFIG_I2C_EEPROM=y
 CONFIG_SYS_I2C_EEPROM_ADDR=0x50
 CONFIG_SYS_I2C_EEPROM_BUS=2
@@ -57,7 +53,7 @@ CONFIG_SYS_EEPROM_SIZE=32768
 CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=6
 CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2
 CONFIG_DM_MMC=y
-CONFIG_FSL_ESDHC=y
+CONFIG_FSL_ESDHC_IMX=y
 CONFIG_MTD=y
 CONFIG_NAND_VF610_NFC=y
 CONFIG_NAND_VF610_NFC_DT=y
@@ -68,6 +64,7 @@ CONFIG_SPI_FLASH_STMICRO=y
 CONFIG_SPI_FLASH_MTD=y
 CONFIG_PHYLIB=y
 CONFIG_PHY_MICREL=y
+CONFIG_PHY_MICREL_KSZ8XXX=y
 CONFIG_DM_ETH=y
 CONFIG_FEC_MXC=y
 CONFIG_MII=y
@@ -75,8 +72,6 @@ CONFIG_PINCTRL=y
 CONFIG_PINCTRL_VYBRID=y
 CONFIG_DM_RTC=y
 CONFIG_RTC_M41T62=y
-# CONFIG_SPL_SERIAL_PRESENT is not set
-# CONFIG_TPL_SERIAL_PRESENT is not set
 CONFIG_DM_SERIAL=y
 CONFIG_FSL_LPUART=y
 CONFIG_SPI=y