#include <image.h>
#include <pci.h>
-#if defined(CONFIG_CMD_SCSI)
-
#ifdef CONFIG_SCSI_SYM53C8XX
#define SCSI_VEND_ID 0x1000
#ifndef CONFIG_SCSI_DEV_ID
static int scsi_curr_dev; /* current device */
-static block_dev_desc_t scsi_dev_desc[CFG_SCSI_MAX_DEVICE];
+static block_dev_desc_t scsi_dev_desc[CONFIG_SYS_SCSI_MAX_DEVICE];
/********************************************************************************
* forward declerations of some Setup Routines
if(mode==1) {
printf("scanning bus for devices...\n");
}
- for(i=0;i<CFG_SCSI_MAX_DEVICE;i++) {
+ for(i=0;i<CONFIG_SYS_SCSI_MAX_DEVICE;i++) {
scsi_dev_desc[i].target=0xff;
scsi_dev_desc[i].lun=0xff;
scsi_dev_desc[i].lba=0;
scsi_dev_desc[i].block_read=scsi_read;
}
scsi_max_devs=0;
- for(i=0;i<CFG_SCSI_MAX_SCSI_ID;i++) {
+ for(i=0;i<CONFIG_SYS_SCSI_MAX_SCSI_ID;i++) {
pccb->target=i;
- for(lun=0;lun<CFG_SCSI_MAX_LUN;lun++) {
+ for(lun=0;lun<CONFIG_SYS_SCSI_MAX_LUN;lun++) {
pccb->lun=lun;
pccb->pdata=(unsigned char *)&tempbuff;
pccb->datalen=512;
if(scsi_max_devs>0)
scsi_curr_dev=0;
else
- scsi_curr_dev=-1;
+ scsi_curr_dev = -1;
}
block_dev_desc_t * scsi_get_dev(int dev)
{
- return (dev < CFG_SCSI_MAX_DEVICE) ? &scsi_dev_desc[dev] : NULL;
+ return (dev < CONFIG_SYS_SCSI_MAX_DEVICE) ? &scsi_dev_desc[dev] : NULL;
}
/******************************************************************************
* scsi boot command intepreter. Derived from diskboot
*/
-int do_scsiboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+int do_scsiboot (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
char *boot_device = NULL;
char *ep;
int dev, part = 0;
- ulong addr, cnt, checksum;
+ ulong addr, cnt;
disk_partition_t info;
image_header_t *hdr;
int rcode = 0;
+#if defined(CONFIG_FIT)
+ const void *fit_hdr = NULL;
+#endif
switch (argc) {
case 1:
- addr = CFG_LOAD_ADDR;
+ addr = CONFIG_SYS_LOAD_ADDR;
boot_device = getenv ("bootdevice");
break;
case 2:
boot_device = argv[2];
break;
default:
- printf ("Usage:\n%s\n", cmdtp->usage);
+ cmd_usage(cmdtp);
return 1;
}
return 1;
}
- hdr = (image_header_t *)addr;
+ switch (genimg_get_format ((void *)addr)) {
+ case IMAGE_FORMAT_LEGACY:
+ hdr = (image_header_t *)addr;
- if (ntohl(hdr->ih_magic) == IH_MAGIC) {
- printf("\n** Bad Magic Number **\n");
- return 1;
- }
+ if (!image_check_hcrc (hdr)) {
+ puts ("\n** Bad Header Checksum **\n");
+ return 1;
+ }
- checksum = ntohl(hdr->ih_hcrc);
- hdr->ih_hcrc = 0;
+ image_print_contents (hdr);
+ cnt = image_get_image_size (hdr);
+ break;
+#if defined(CONFIG_FIT)
+ case IMAGE_FORMAT_FIT:
+ fit_hdr = (const void *)addr;
+ puts ("Fit image detected...\n");
- if (crc32 (0, (uchar *)hdr, sizeof(image_header_t)) != checksum) {
- puts ("\n** Bad Header Checksum **\n");
+ cnt = fit_get_size (fit_hdr);
+ break;
+#endif
+ default:
+ puts ("** Unknown image type\n");
return 1;
}
- hdr->ih_hcrc = htonl(checksum); /* restore checksum for later use */
- print_image_hdr (hdr);
- cnt = (ntohl(hdr->ih_size) + sizeof(image_header_t));
cnt += info.blksz - 1;
cnt /= info.blksz;
cnt -= 1;
printf ("** Read error on %d:%d\n", dev, part);
return 1;
}
+
+#if defined(CONFIG_FIT)
+ /* This cannot be done earlier, we need complete FIT image in RAM first */
+ if (genimg_get_format ((void *)addr) == IMAGE_FORMAT_FIT) {
+ if (!fit_check_format (fit_hdr)) {
+ puts ("** Bad FIT image format\n");
+ return 1;
+ }
+ fit_print_contents (fit_hdr);
+ }
+#endif
+
/* Loading ok, update default load address */
load_addr = addr;
/*********************************************************************************
* scsi command intepreter
*/
-int do_scsi (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+int do_scsi (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
switch (argc) {
case 0:
- case 1: printf ("Usage:\n%s\n", cmdtp->usage); return 1;
+ case 1: cmd_usage(cmdtp); return 1;
case 2:
if (strncmp(argv[1],"res",3) == 0) {
printf("\nReset SCSI\n");
}
if (strncmp(argv[1],"inf",3) == 0) {
int i;
- for (i=0; i<CFG_SCSI_MAX_DEVICE; ++i) {
+ for (i=0; i<CONFIG_SYS_SCSI_MAX_DEVICE; ++i) {
if(scsi_dev_desc[i].type==DEV_TYPE_UNKNOWN)
continue; /* list only known devices */
printf ("SCSI dev. %d: ", i);
return 0;
}
if (strncmp(argv[1],"dev",3) == 0) {
- if ((scsi_curr_dev < 0) || (scsi_curr_dev >= CFG_SCSI_MAX_DEVICE)) {
+ if ((scsi_curr_dev < 0) || (scsi_curr_dev >= CONFIG_SYS_SCSI_MAX_DEVICE)) {
printf("\nno SCSI devices available\n");
return 1;
}
}
if (strncmp(argv[1],"part",4) == 0) {
int dev, ok;
- for (ok=0, dev=0; dev<CFG_SCSI_MAX_DEVICE; ++dev) {
+ for (ok=0, dev=0; dev<CONFIG_SYS_SCSI_MAX_DEVICE; ++dev) {
if (scsi_dev_desc[dev].type!=DEV_TYPE_UNKNOWN) {
ok++;
if (dev)
printf("\nno SCSI devices available\n");
return 1;
}
- printf ("Usage:\n%s\n", cmdtp->usage);
+ cmd_usage(cmdtp);
return 1;
- case 3:
+ case 3:
if (strncmp(argv[1],"dev",3) == 0) {
int dev = (int)simple_strtoul(argv[2], NULL, 10);
printf ("\nSCSI device %d: ", dev);
- if (dev >= CFG_SCSI_MAX_DEVICE) {
+ if (dev >= CONFIG_SYS_SCSI_MAX_DEVICE) {
printf("unknown device\n");
return 1;
}
}
return 1;
}
- printf ("Usage:\n%s\n", cmdtp->usage);
+ cmd_usage(cmdtp);
return 1;
default:
/* at least 4 args */
return 0;
}
} /* switch */
- printf ("Usage:\n%s\n", cmdtp->usage);
+ cmd_usage(cmdtp);
return 1;
}
U_BOOT_CMD(
scsi, 5, 1, do_scsi,
- "scsi - SCSI sub-system\n",
+ "SCSI sub-system",
"reset - reset SCSI controller\n"
"scsi info - show available SCSI devices\n"
"scsi scan - (re-)scan SCSI bus\n"
"scsi device [dev] - show or set current device\n"
"scsi part [dev] - print partition table of one or all SCSI devices\n"
"scsi read addr blk# cnt - read `cnt' blocks starting at block `blk#'\n"
- " to memory address `addr'\n"
+ " to memory address `addr'"
);
U_BOOT_CMD(
scsiboot, 3, 1, do_scsiboot,
- "scsiboot- boot from SCSI device\n",
- "loadAddr dev:part\n"
+ "boot from SCSI device",
+ "loadAddr dev:part"
);
-
-#endif
projects / oweals / u-boot.git / blobdiff