This is the size of the bootstage record list and is the maximum
number of bootstage records that can be recorded.
+config TPL_BOOTSTAGE_RECORD_COUNT
+ int "Number of boot stage records to store for TPL"
+ default 5
+ help
+ This is the size of the bootstage record list and is the maximum
+ number of bootstage records that can be recorded.
+
config BOOTSTAGE_FDT
bool "Store boot timing information in the OS device tree"
depends on BOOTSTAGE
This should be large enough to hold the bootstage stash. A value of
4096 (4KiB) is normally plenty.
+config SHOW_BOOT_PROGRESS
+ bool "Show boot progress in a board-specific manner"
+ help
+ Defining this option allows to add some board-specific code (calling
+ a user-provided function show_boot_progress(int) that enables you to
+ show the system's boot progress on some display (for example, some
+ LEDs) on your board. At the moment, the following checkpoints are
+ implemented:
+
+ Legacy uImage format:
+
+ Arg Where When
+ 1 common/cmd_bootm.c before attempting to boot an image
+ -1 common/cmd_bootm.c Image header has bad magic number
+ 2 common/cmd_bootm.c Image header has correct magic number
+ -2 common/cmd_bootm.c Image header has bad checksum
+ 3 common/cmd_bootm.c Image header has correct checksum
+ -3 common/cmd_bootm.c Image data has bad checksum
+ 4 common/cmd_bootm.c Image data has correct checksum
+ -4 common/cmd_bootm.c Image is for unsupported architecture
+ 5 common/cmd_bootm.c Architecture check OK
+ -5 common/cmd_bootm.c Wrong Image Type (not kernel, multi)
+ 6 common/cmd_bootm.c Image Type check OK
+ -6 common/cmd_bootm.c gunzip uncompression error
+ -7 common/cmd_bootm.c Unimplemented compression type
+ 7 common/cmd_bootm.c Uncompression OK
+ 8 common/cmd_bootm.c No uncompress/copy overwrite error
+ -9 common/cmd_bootm.c Unsupported OS (not Linux, BSD, VxWorks, QNX)
+
+ 9 common/image.c Start initial ramdisk verification
+ -10 common/image.c Ramdisk header has bad magic number
+ -11 common/image.c Ramdisk header has bad checksum
+ 10 common/image.c Ramdisk header is OK
+ -12 common/image.c Ramdisk data has bad checksum
+ 11 common/image.c Ramdisk data has correct checksum
+ 12 common/image.c Ramdisk verification complete, start loading
+ -13 common/image.c Wrong Image Type (not PPC Linux ramdisk)
+ 13 common/image.c Start multifile image verification
+ 14 common/image.c No initial ramdisk, no multifile, continue.
+
+ 15 arch/<arch>/lib/bootm.c All preparation done, transferring control to OS
+
+ -30 arch/powerpc/lib/board.c Fatal error, hang the system
+ -31 post/post.c POST test failed, detected by post_output_backlog()
+ -32 post/post.c POST test failed, detected by post_run_single()
+
+ 34 common/cmd_doc.c before loading a Image from a DOC device
+ -35 common/cmd_doc.c Bad usage of "doc" command
+ 35 common/cmd_doc.c correct usage of "doc" command
+ -36 common/cmd_doc.c No boot device
+ 36 common/cmd_doc.c correct boot device
+ -37 common/cmd_doc.c Unknown Chip ID on boot device
+ 37 common/cmd_doc.c correct chip ID found, device available
+ -38 common/cmd_doc.c Read Error on boot device
+ 38 common/cmd_doc.c reading Image header from DOC device OK
+ -39 common/cmd_doc.c Image header has bad magic number
+ 39 common/cmd_doc.c Image header has correct magic number
+ -40 common/cmd_doc.c Error reading Image from DOC device
+ 40 common/cmd_doc.c Image header has correct magic number
+ 41 common/cmd_ide.c before loading a Image from a IDE device
+ -42 common/cmd_ide.c Bad usage of "ide" command
+ 42 common/cmd_ide.c correct usage of "ide" command
+ -43 common/cmd_ide.c No boot device
+ 43 common/cmd_ide.c boot device found
+ -44 common/cmd_ide.c Device not available
+ 44 common/cmd_ide.c Device available
+ -45 common/cmd_ide.c wrong partition selected
+ 45 common/cmd_ide.c partition selected
+ -46 common/cmd_ide.c Unknown partition table
+ 46 common/cmd_ide.c valid partition table found
+ -47 common/cmd_ide.c Invalid partition type
+ 47 common/cmd_ide.c correct partition type
+ -48 common/cmd_ide.c Error reading Image Header on boot device
+ 48 common/cmd_ide.c reading Image Header from IDE device OK
+ -49 common/cmd_ide.c Image header has bad magic number
+ 49 common/cmd_ide.c Image header has correct magic number
+ -50 common/cmd_ide.c Image header has bad checksum
+ 50 common/cmd_ide.c Image header has correct checksum
+ -51 common/cmd_ide.c Error reading Image from IDE device
+ 51 common/cmd_ide.c reading Image from IDE device OK
+ 52 common/cmd_nand.c before loading a Image from a NAND device
+ -53 common/cmd_nand.c Bad usage of "nand" command
+ 53 common/cmd_nand.c correct usage of "nand" command
+ -54 common/cmd_nand.c No boot device
+ 54 common/cmd_nand.c boot device found
+ -55 common/cmd_nand.c Unknown Chip ID on boot device
+ 55 common/cmd_nand.c correct chip ID found, device available
+ -56 common/cmd_nand.c Error reading Image Header on boot device
+ 56 common/cmd_nand.c reading Image Header from NAND device OK
+ -57 common/cmd_nand.c Image header has bad magic number
+ 57 common/cmd_nand.c Image header has correct magic number
+ -58 common/cmd_nand.c Error reading Image from NAND device
+ 58 common/cmd_nand.c reading Image from NAND device OK
+
+ -60 common/env_common.c Environment has a bad CRC, using default
+
+ 64 net/eth.c starting with Ethernet configuration.
+ -64 net/eth.c no Ethernet found.
+ 65 net/eth.c Ethernet found.
+
+ -80 common/cmd_net.c usage wrong
+ 80 common/cmd_net.c before calling net_loop()
+ -81 common/cmd_net.c some error in net_loop() occurred
+ 81 common/cmd_net.c net_loop() back without error
+ -82 common/cmd_net.c size == 0 (File with size 0 loaded)
+ 82 common/cmd_net.c trying automatic boot
+ 83 common/cmd_net.c running "source" command
+ -83 common/cmd_net.c some error in automatic boot or "source" command
+ 84 common/cmd_net.c end without errors
+
+ FIT uImage format:
+
+ Arg Where When
+ 100 common/cmd_bootm.c Kernel FIT Image has correct format
+ -100 common/cmd_bootm.c Kernel FIT Image has incorrect format
+ 101 common/cmd_bootm.c No Kernel subimage unit name, using configuration
+ -101 common/cmd_bootm.c Can't get configuration for kernel subimage
+ 102 common/cmd_bootm.c Kernel unit name specified
+ -103 common/cmd_bootm.c Can't get kernel subimage node offset
+ 103 common/cmd_bootm.c Found configuration node
+ 104 common/cmd_bootm.c Got kernel subimage node offset
+ -104 common/cmd_bootm.c Kernel subimage hash verification failed
+ 105 common/cmd_bootm.c Kernel subimage hash verification OK
+ -105 common/cmd_bootm.c Kernel subimage is for unsupported architecture
+ 106 common/cmd_bootm.c Architecture check OK
+ -106 common/cmd_bootm.c Kernel subimage has wrong type
+ 107 common/cmd_bootm.c Kernel subimage type OK
+ -107 common/cmd_bootm.c Can't get kernel subimage data/size
+ 108 common/cmd_bootm.c Got kernel subimage data/size
+ -108 common/cmd_bootm.c Wrong image type (not legacy, FIT)
+ -109 common/cmd_bootm.c Can't get kernel subimage type
+ -110 common/cmd_bootm.c Can't get kernel subimage comp
+ -111 common/cmd_bootm.c Can't get kernel subimage os
+ -112 common/cmd_bootm.c Can't get kernel subimage load address
+ -113 common/cmd_bootm.c Image uncompress/copy overwrite error
+
+ 120 common/image.c Start initial ramdisk verification
+ -120 common/image.c Ramdisk FIT image has incorrect format
+ 121 common/image.c Ramdisk FIT image has correct format
+ 122 common/image.c No ramdisk subimage unit name, using configuration
+ -122 common/image.c Can't get configuration for ramdisk subimage
+ 123 common/image.c Ramdisk unit name specified
+ -124 common/image.c Can't get ramdisk subimage node offset
+ 125 common/image.c Got ramdisk subimage node offset
+ -125 common/image.c Ramdisk subimage hash verification failed
+ 126 common/image.c Ramdisk subimage hash verification OK
+ -126 common/image.c Ramdisk subimage for unsupported architecture
+ 127 common/image.c Architecture check OK
+ -127 common/image.c Can't get ramdisk subimage data/size
+ 128 common/image.c Got ramdisk subimage data/size
+ 129 common/image.c Can't get ramdisk load address
+ -129 common/image.c Got ramdisk load address
+
+ -130 common/cmd_doc.c Incorrect FIT image format
+ 131 common/cmd_doc.c FIT image format OK
+
+ -140 common/cmd_ide.c Incorrect FIT image format
+ 141 common/cmd_ide.c FIT image format OK
+
+ -150 common/cmd_nand.c Incorrect FIT image format
+ 151 common/cmd_nand.c FIT image format OK
+
endmenu
menu "Boot media"
This is the string of commands that will be used as bootcmd and if
AUTOBOOT is set, automatically run.
+config USE_PREBOOT
+ bool "Enable preboot"
+ help
+ When this option is enabled, the existence of the environment
+ variable "preboot" will be checked immediately before starting the
+ CONFIG_BOOTDELAY countdown and/or running the auto-boot command resp.
+ entering interactive mode.
+
+ This feature is especially useful when "preboot" is automatically
+ generated or modified. For example, the boot code can modify the
+ "preboot" when a user holds down a certain combination of keys.
+
+config PREBOOT
+ string "preboot default value"
+ depends on USE_PREBOOT
+ default ""
+ help
+ This is the default of "preboot" environment variable.
+
menu "Console"
config MENU
All Messages with a loglevel smaller than the console loglevel will
be compiled in. The loglevels are defined as follows:
- 0 (KERN_EMERG) system is unusable
- 1 (KERN_ALERT) action must be taken immediately
- 2 (KERN_CRIT) critical conditions
- 3 (KERN_ERR) error conditions
- 4 (KERN_WARNING) warning conditions
- 5 (KERN_NOTICE) normal but significant condition
- 6 (KERN_INFO) informational
- 7 (KERN_DEBUG) debug-level messages
+ 0 - emergency
+ 1 - alert
+ 2 - critical
+ 3 - error
+ 4 - warning
+ 5 - note
+ 6 - info
+ 7 - debug
+ 8 - debug content
+ 9 - debug hardware I/O
config SPL_LOGLEVEL
int
higher than this will be ignored. If possible log statements below
this level will be discarded at build time. Levels:
- 0 - panic
- 1 - critical
- 2 - error
- 3 - warning
- 4 - note
- 5 - info
- 6 - detail
+ 0 - emergency
+ 1 - alert
+ 2 - critical
+ 3 - error
+ 4 - warning
+ 5 - note
+ 6 - info
7 - debug
+ 8 - debug content
+ 9 - debug hardware I/O
config SPL_LOG_MAX_LEVEL
int "Maximum log level to record in SPL"
higher than this will be ignored. If possible log statements below
this level will be discarded at build time. Levels:
- 0 - panic
- 1 - critical
- 2 - error
- 3 - warning
- 4 - note
- 5 - info
- 6 - detail
+ 0 - emergency
+ 1 - alert
+ 2 - critical
+ 3 - error
+ 4 - warning
+ 5 - note
+ 6 - info
7 - debug
+ 8 - debug content
+ 9 - debug hardware I/O
config TPL_LOG_MAX_LEVEL
int "Maximum log level to record in TPL"
higher than this will be ignored. If possible log statements below
this level will be discarded at build time. Levels:
- 0 - panic
- 1 - critical
- 2 - error
- 3 - warning
- 4 - note
- 5 - info
- 6 - detail
+ 0 - emergency
+ 1 - alert
+ 2 - critical
+ 3 - error
+ 4 - warning
+ 5 - note
+ 6 - info
+ 7 - debug
+ 8 - debug content
+ 9 - debug hardware I/O
+
+config LOG_DEFAULT_LEVEL
+ int "Default logging level to display"
+ default 6
+ help
+ This is the default logging level set when U-Boot starts. It can
+ be adjusted later using the 'log level' command. Note that setting
+ this to a value above LOG_MAX_LEVEL will be ineffective, since the
+ higher levels are not compiled in to U-Boot.
+
+ 0 - emergency
+ 1 - alert
+ 2 - critical
+ 3 - error
+ 4 - warning
+ 5 - note
+ 6 - info
7 - debug
+ 8 - debug content
+ 9 - debug hardware I/O
config LOG_CONSOLE
bool "Allow log output to the console"
the relocation phase. The board function checkboard() is called to do
this.
+config BOUNCE_BUFFER
+ bool "Include bounce buffer API"
+ help
+ Some peripherals support DMA from a subset of physically
+ addressable memory only. To support such peripherals, the
+ bounce buffer API uses a temporary buffer: it copies data
+ to/from DMA regions while managing cache operations.
+
+ A second possible use of bounce buffers is their ability to
+ provide aligned buffers for DMA operations.
+
+config BOARD_TYPES
+ bool "Call get_board_type() to get and display the board type"
+ help
+ If this option is enabled, checkboard() will call get_board_type()
+ to get a string containing the board type and this will be
+ displayed immediately after the model is shown on the console
+ early in boot.
+
menu "Start-up hooks"
config ARCH_EARLY_INIT_R
default 100
depends on UPDATE_TFTP
+config ANDROID_AB
+ bool "Android A/B updates"
+ default n
+ help
+ If enabled, adds support for the new Android A/B update model. This
+ allows the bootloader to select which slot to boot from based on the
+ information provided by userspace via the Android boot_ctrl HAL. This
+ allows a bootloader to try a new version of the system but roll back
+ to previous version if the new one didn't boot all the way.
+
endmenu
menu "Blob list"
projects / oweals / u-boot.git / blobdiff