command: Remove the cmd_tbl_t typedef
[oweals/u-boot.git] / cmd / elf.c
index 7e710c931702e90c3c97a205120cc48cf5c5affd..4f2969a6d906ec9d5080e55df066573ff70ead7c 100644 (file)
--- a/cmd/elf.c
+++ b/cmd/elf.c
+// SPDX-License-Identifier: BSD-2-Clause
 /*
  * Copyright (c) 2001 William L. Pitts
  * All rights reserved.
- *
- * Redistribution and use in source and binary forms are freely
- * permitted provided that the above copyright notice and this
- * paragraph and the following disclaimer are duplicated in all
- * such forms.
- *
- * This software is provided "AS IS" and without any express or
- * implied warranties, including, without limitation, the implied
- * warranties of merchantability and fitness for a particular
- * purpose.
  */
 
 #include <common.h>
 #include <command.h>
+#include <cpu_func.h>
 #include <elf.h>
-#include <environment.h>
+#include <env.h>
+#include <image.h>
 #include <net.h>
 #include <vxworks.h>
 #ifdef CONFIG_X86
 #include <vbe.h>
+#include <asm/cache.h>
 #include <asm/e820.h>
 #include <linux/linkage.h>
 #endif
 
-/*
- * A very simple ELF64 loader, assumes the image is valid, returns the
- * entry point address.
- *
- * Note if U-Boot is 32-bit, the loader assumes the to segment's
- * physical address and size is within the lower 32-bit address space.
- */
-static unsigned long load_elf64_image_phdr(unsigned long addr)
-{
-       Elf64_Ehdr *ehdr; /* Elf header structure pointer */
-       Elf64_Phdr *phdr; /* Program header structure pointer */
-       int i;
-
-       ehdr = (Elf64_Ehdr *)addr;
-       phdr = (Elf64_Phdr *)(addr + (ulong)ehdr->e_phoff);
-
-       /* Load each program header */
-       for (i = 0; i < ehdr->e_phnum; ++i) {
-               void *dst = (void *)(ulong)phdr->p_paddr;
-               void *src = (void *)addr + phdr->p_offset;
-
-               debug("Loading phdr %i to 0x%p (%lu bytes)\n",
-                     i, dst, (ulong)phdr->p_filesz);
-               if (phdr->p_filesz)
-                       memcpy(dst, src, phdr->p_filesz);
-               if (phdr->p_filesz != phdr->p_memsz)
-                       memset(dst + phdr->p_filesz, 0x00,
-                              phdr->p_memsz - phdr->p_filesz);
-               flush_cache((unsigned long)dst, phdr->p_filesz);
-               ++phdr;
-       }
-
-       return ehdr->e_entry;
-}
-
-/*
- * A very simple ELF loader, assumes the image is valid, returns the
- * entry point address.
- *
- * The loader firstly reads the EFI class to see if it's a 64-bit image.
- * If yes, call the ELF64 loader. Otherwise continue with the ELF32 loader.
- */
-static unsigned long load_elf_image_phdr(unsigned long addr)
-{
-       Elf32_Ehdr *ehdr; /* Elf header structure pointer */
-       Elf32_Phdr *phdr; /* Program header structure pointer */
-       int i;
-
-       ehdr = (Elf32_Ehdr *)addr;
-       if (ehdr->e_ident[EI_CLASS] == ELFCLASS64)
-               return load_elf64_image_phdr(addr);
-
-       phdr = (Elf32_Phdr *)(addr + ehdr->e_phoff);
-
-       /* Load each program header */
-       for (i = 0; i < ehdr->e_phnum; ++i) {
-               void *dst = (void *)(uintptr_t)phdr->p_paddr;
-               void *src = (void *)addr + phdr->p_offset;
-
-               debug("Loading phdr %i to 0x%p (%i bytes)\n",
-                     i, dst, phdr->p_filesz);
-               if (phdr->p_filesz)
-                       memcpy(dst, src, phdr->p_filesz);
-               if (phdr->p_filesz != phdr->p_memsz)
-                       memset(dst + phdr->p_filesz, 0x00,
-                              phdr->p_memsz - phdr->p_filesz);
-               flush_cache((unsigned long)dst, phdr->p_filesz);
-               ++phdr;
-       }
-
-       return ehdr->e_entry;
-}
-
-static unsigned long load_elf_image_shdr(unsigned long addr)
-{
-       Elf32_Ehdr *ehdr; /* Elf header structure pointer */
-       Elf32_Shdr *shdr; /* Section header structure pointer */
-       unsigned char *strtab = 0; /* String table pointer */
-       unsigned char *image; /* Binary image pointer */
-       int i; /* Loop counter */
-
-       ehdr = (Elf32_Ehdr *)addr;
-
-       /* Find the section header string table for output info */
-       shdr = (Elf32_Shdr *)(addr + ehdr->e_shoff +
-                            (ehdr->e_shstrndx * sizeof(Elf32_Shdr)));
-
-       if (shdr->sh_type == SHT_STRTAB)
-               strtab = (unsigned char *)(addr + shdr->sh_offset);
-
-       /* Load each appropriate section */
-       for (i = 0; i < ehdr->e_shnum; ++i) {
-               shdr = (Elf32_Shdr *)(addr + ehdr->e_shoff +
-                                    (i * sizeof(Elf32_Shdr)));
-
-               if (!(shdr->sh_flags & SHF_ALLOC) ||
-                   shdr->sh_addr == 0 || shdr->sh_size == 0) {
-                       continue;
-               }
-
-               if (strtab) {
-                       debug("%sing %s @ 0x%08lx (%ld bytes)\n",
-                             (shdr->sh_type == SHT_NOBITS) ? "Clear" : "Load",
-                              &strtab[shdr->sh_name],
-                              (unsigned long)shdr->sh_addr,
-                              (long)shdr->sh_size);
-               }
-
-               if (shdr->sh_type == SHT_NOBITS) {
-                       memset((void *)(uintptr_t)shdr->sh_addr, 0,
-                              shdr->sh_size);
-               } else {
-                       image = (unsigned char *)addr + shdr->sh_offset;
-                       memcpy((void *)(uintptr_t)shdr->sh_addr,
-                              (const void *)image, shdr->sh_size);
-               }
-               flush_cache(shdr->sh_addr, shdr->sh_size);
-       }
-
-       return ehdr->e_entry;
-}
-
 /* Allow ports to override the default behavior */
 static unsigned long do_bootelf_exec(ulong (*entry)(int, char * const[]),
-                                    int argc, char * const argv[])
+                                    int argc, char *const argv[])
 {
        unsigned long ret;
 
@@ -162,32 +34,8 @@ static unsigned long do_bootelf_exec(ulong (*entry)(int, char * const[]),
        return ret;
 }
 
-/*
- * Determine if a valid ELF image exists at the given memory location.
- * First look at the ELF header magic field, then make sure that it is
- * executable.
- */
-int valid_elf_image(unsigned long addr)
-{
-       Elf32_Ehdr *ehdr; /* Elf header structure pointer */
-
-       ehdr = (Elf32_Ehdr *)addr;
-
-       if (!IS_ELF(*ehdr)) {
-               printf("## No elf image at address 0x%08lx\n", addr);
-               return 0;
-       }
-
-       if (ehdr->e_type != ET_EXEC) {
-               printf("## Not a 32-bit elf image at address 0x%08lx\n", addr);
-               return 0;
-       }
-
-       return 1;
-}
-
 /* Interpreter command to boot an arbitrary ELF image from memory */
-int do_bootelf(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+int do_bootelf(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[])
 {
        unsigned long addr; /* Address of the ELF image */
        unsigned long rc; /* Return value from user code */
@@ -210,7 +58,7 @@ int do_bootelf(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
                /* Consume address */
                argc--; argv++;
        } else
-               addr = load_addr;
+               addr = image_load_addr;
 
        if (!valid_elf_image(addr))
                return 1;
@@ -243,10 +91,10 @@ int do_bootelf(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
  * be either an ELF image or a raw binary.  Will attempt to setup the
  * bootline and other parameters correctly.
  */
-int do_bootvx(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+int do_bootvx(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[])
 {
        unsigned long addr; /* Address of image */
-       unsigned long bootaddr; /* Address to put the bootline */
+       unsigned long bootaddr = 0; /* Address to put the bootline */
        char *bootline; /* Text of the bootline */
        char *tmp; /* Temporary char pointer */
        char build_buf[128]; /* Buffer for building the bootline */
@@ -264,7 +112,7 @@ int do_bootvx(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
         * If we don't know where the image is then we're done.
         */
        if (argc < 2)
-               addr = load_addr;
+               addr = image_load_addr;
        else
                addr = simple_strtoul(argv[1], NULL, 16);
 
@@ -295,6 +143,45 @@ int do_bootvx(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
        puts("## Ethernet MAC address not copied to NV RAM\n");
 #endif
 
+#ifdef CONFIG_X86
+       /*
+        * Get VxWorks's physical memory base address from environment,
+        * if we don't specify it in the environment, use a default one.
+        */
+       base = env_get_hex("vx_phys_mem_base", VXWORKS_PHYS_MEM_BASE);
+       data = (struct e820_entry *)(base + E820_DATA_OFFSET);
+       info = (struct e820_info *)(base + E820_INFO_OFFSET);
+
+       memset(info, 0, sizeof(struct e820_info));
+       info->sign = E820_SIGNATURE;
+       info->entries = install_e820_map(E820MAX, data);
+       info->addr = (info->entries - 1) * sizeof(struct e820_entry) +
+                    E820_DATA_OFFSET;
+
+       /*
+        * Explicitly clear the bootloader image size otherwise if memory
+        * at this offset happens to contain some garbage data, the final
+        * available memory size for the kernel is insane.
+        */
+       *(u32 *)(base + BOOT_IMAGE_SIZE_OFFSET) = 0;
+
+       /*
+        * Prepare compatible framebuffer information block.
+        * The VESA mode has to be 32-bit RGBA.
+        */
+       if (vesa->x_resolution && vesa->y_resolution) {
+               gop = (struct efi_gop_info *)(base + EFI_GOP_INFO_OFFSET);
+               gop->magic = EFI_GOP_INFO_MAGIC;
+               gop->info.version = 0;
+               gop->info.width = vesa->x_resolution;
+               gop->info.height = vesa->y_resolution;
+               gop->info.pixel_format = EFI_GOT_RGBA8;
+               gop->info.pixels_per_scanline = vesa->bytes_per_scanline / 4;
+               gop->fb_base = vesa->phys_base_ptr;
+               gop->fb_size = vesa->bytes_per_scanline * vesa->y_resolution;
+       }
+#endif
+
        /*
         * Use bootaddr to find the location in memory that VxWorks
         * will look for the bootline string. The default value is
@@ -303,11 +190,16 @@ int do_bootvx(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
         */
        tmp = env_get("bootaddr");
        if (!tmp) {
+#ifdef CONFIG_X86
+               bootaddr = base + X86_BOOT_LINE_OFFSET;
+#else
                printf("## VxWorks bootline address not specified\n");
                return 1;
+#endif
        }
 
-       bootaddr = simple_strtoul(tmp, NULL, 16);
+       if (!bootaddr)
+               bootaddr = simple_strtoul(tmp, NULL, 16);
 
        /*
         * Check to see if the bootline is defined in the 'bootargs' parameter.
@@ -371,45 +263,6 @@ int do_bootvx(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
        flush_cache(bootaddr, max(strlen(bootline), (size_t)255));
        printf("## Using bootline (@ 0x%lx): %s\n", bootaddr, (char *)bootaddr);
 
-#ifdef CONFIG_X86
-       /*
-        * Get VxWorks's physical memory base address from environment,
-        * if we don't specify it in the environment, use a default one.
-        */
-       base = env_get_hex("vx_phys_mem_base", VXWORKS_PHYS_MEM_BASE);
-       data = (struct e820_entry *)(base + E820_DATA_OFFSET);
-       info = (struct e820_info *)(base + E820_INFO_OFFSET);
-
-       memset(info, 0, sizeof(struct e820_info));
-       info->sign = E820_SIGNATURE;
-       info->entries = install_e820_map(E820MAX, data);
-       info->addr = (info->entries - 1) * sizeof(struct e820_entry) +
-                    E820_DATA_OFFSET;
-
-       /*
-        * Explicitly clear the bootloader image size otherwise if memory
-        * at this offset happens to contain some garbage data, the final
-        * available memory size for the kernel is insane.
-        */
-       *(u32 *)(base + BOOT_IMAGE_SIZE_OFFSET) = 0;
-
-       /*
-        * Prepare compatible framebuffer information block.
-        * The VESA mode has to be 32-bit RGBA.
-        */
-       if (vesa->x_resolution && vesa->y_resolution) {
-               gop = (struct efi_gop_info *)(base + EFI_GOP_INFO_OFFSET);
-               gop->magic = EFI_GOP_INFO_MAGIC;
-               gop->info.version = 0;
-               gop->info.width = vesa->x_resolution;
-               gop->info.height = vesa->y_resolution;
-               gop->info.pixel_format = EFI_GOT_RGBA8;
-               gop->info.pixels_per_scanline = vesa->bytes_per_scanline / 4;
-               gop->fb_base = vesa->phys_base_ptr;
-               gop->fb_size = vesa->bytes_per_scanline * vesa->y_resolution;
-       }
-#endif
-
        /*
         * If the data at the load address is an elf image, then
         * treat it like an elf image. Otherwise, assume that it is a