rename CFG_ macros to CONFIG_SYS

[oweals/u-boot.git] / board / socrates / tlb.c

diff --git a/board/socrates/tlb.c b/board/socrates/tlb.c
index d255cea15e5cf173eccb47f576b3718f8dbcedb7..b91b1eab6ec6d5670047e449f65dc265b8f52140 100644 (file)
--- a/board/socrates/tlb.c
+++ b/board/socrates/tlb.c
@@ -31,16 +31,16 @@
 
 struct fsl_e_tlb_entry tlb_table[] = {
        /* TLB 0 - for temp stack in cache */
-       SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR, CFG_INIT_RAM_ADDR,
+       SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR,
                      MAS3_SX|MAS3_SW|MAS3_SR, 0,
                      0, 0, BOOKE_PAGESZ_4K, 0),
-       SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 4 * 1024 , CFG_INIT_RAM_ADDR + 4 * 1024,
+       SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024,
                      MAS3_SX|MAS3_SW|MAS3_SR, 0,
                      0, 0, BOOKE_PAGESZ_4K, 0),
-       SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 8 * 1024 , CFG_INIT_RAM_ADDR + 8 * 1024,
+       SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024,
                      MAS3_SX|MAS3_SW|MAS3_SR, 0,
                      0, 0, BOOKE_PAGESZ_4K, 0),
-       SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + 12 * 1024 , CFG_INIT_RAM_ADDR + 12 * 1024,
+       SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024,
                      MAS3_SX|MAS3_SW|MAS3_SR, 0,
                      0, 0, BOOKE_PAGESZ_4K, 0),
 
@@ -50,7 +50,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
         * 0xfc000000   64M     FLASH
         * Out of reset this entry is only 4K.
         */
-       SET_TLB_ENTRY(1, CFG_FLASH_BASE, CFG_FLASH_BASE,
+       SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE,
                      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
                      0, 1, BOOKE_PAGESZ_64M, 1),
 
@@ -58,7 +58,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
         * TLB 2:       256M    Non-cacheable, guarded
         * 0x80000000   256M    PCI1 MEM First half
         */
-       SET_TLB_ENTRY(1, CFG_PCI1_MEM_PHYS, CFG_PCI1_MEM_PHYS,
+       SET_TLB_ENTRY(1, CONFIG_SYS_PCI1_MEM_PHYS, CONFIG_SYS_PCI1_MEM_PHYS,
                      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
                      0, 2, BOOKE_PAGESZ_256M, 1),
 
@@ -66,16 +66,16 @@ struct fsl_e_tlb_entry tlb_table[] = {
         * TLB 3:       256M    Non-cacheable, guarded
         * 0x90000000   256M    PCI1 MEM Second half
         */
-       SET_TLB_ENTRY(1, CFG_PCI1_MEM_PHYS + 0x10000000, CFG_PCI1_MEM_PHYS + 0x10000000,
+       SET_TLB_ENTRY(1, CONFIG_SYS_PCI1_MEM_PHYS + 0x10000000, CONFIG_SYS_PCI1_MEM_PHYS + 0x10000000,
                      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
                      0, 3, BOOKE_PAGESZ_256M, 1),
 
-#if defined(CFG_FPGA_BASE)
+#if defined(CONFIG_SYS_FPGA_BASE)
        /*
         * TLB 4:       1M      Non-cacheable, guarded
         * 0xc0000000   1M      FPGA and NAND
         */
-       SET_TLB_ENTRY(1, CFG_FPGA_BASE, CFG_FPGA_BASE,
+       SET_TLB_ENTRY(1, CONFIG_SYS_FPGA_BASE, CONFIG_SYS_FPGA_BASE,
                      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
                      0, 4, BOOKE_PAGESZ_1M, 1),
 #endif
@@ -87,7 +87,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
         * (0xcbfc0000  256K    LIME GDC MMIO)
         * MMIO is relocatable and could be at 0xcbfc0000
         */
-       SET_TLB_ENTRY(1, CFG_LIME_BASE, CFG_LIME_BASE,
+       SET_TLB_ENTRY(1, CONFIG_SYS_LIME_BASE, CONFIG_SYS_LIME_BASE,
                      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
                      0, 5, BOOKE_PAGESZ_64M, 1),
 
@@ -96,7 +96,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
         * 0xe000_0000  1M      CCSRBAR
         * 0xe200_0000  16M     PCI1 IO
         */
-       SET_TLB_ENTRY(1, CFG_CCSRBAR, CFG_CCSRBAR_PHYS,
+       SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
                      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
                      0, 6, BOOKE_PAGESZ_64M, 1),
 
@@ -107,11 +107,11 @@ struct fsl_e_tlb_entry tlb_table[] = {
         * Make sure the TLB count at the top of this table is correct.
         * Likely it needs to be increased by two for these entries.
         */
-       SET_TLB_ENTRY(1, CFG_DDR_SDRAM_BASE, CFG_DDR_SDRAM_BASE,
+       SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE,
                      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
                      0, 7, BOOKE_PAGESZ_256M, 1),
 
-       SET_TLB_ENTRY(1, CFG_DDR_SDRAM_BASE + 0x10000000, CFG_DDR_SDRAM_BASE + 0x10000000,
+       SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000, CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000,
                      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
                      0, 8, BOOKE_PAGESZ_256M, 1),
 };