board: pm9g45: Migrate to CONFIG_DM

[oweals/u-boot.git] / board / ronetix / pm9g45 / pm9g45.c

diff --git a/board/ronetix/pm9g45/pm9g45.c b/board/ronetix/pm9g45/pm9g45.c
index 5bb5a3c102da20a53e2667145f1e13d3584dc9cc..c5d28c61e2d714dc91375e2ee6fa95ffe704ceae 100644 (file)
--- a/board/ronetix/pm9g45/pm9g45.c
+++ b/board/ronetix/pm9g45/pm9g45.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * (C) Copyright 2010
  * Ilko Iliev <iliev@ronetix.at>
@@ -7,16 +8,14 @@
  * (C) Copyright 2007-2008
  * Stelian Pop <stelian@popies.net>
  * Lead Tech Design <www.leadtechdesign.com>
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #include <common.h>
-#include <asm/sizes.h>
+#include <linux/sizes.h>
 #include <asm/io.h>
+#include <asm/gpio.h>
 #include <asm/arch/at91sam9_smc.h>
 #include <asm/arch/at91_common.h>
-#include <asm/arch/at91_pmc.h>
 #include <asm/arch/at91_rstc.h>
 #include <asm/arch/at91_matrix.h>
 #include <asm/arch/gpio.h>
@@ -25,6 +24,7 @@
 #include <net.h>
 #endif
 #include <netdev.h>
+#include <asm/mach-types.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -38,7 +38,6 @@ static void pm9g45_nand_hw_init(void)
        unsigned long csa;
        struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC;
        struct at91_matrix *matrix = (struct at91_matrix *)ATMEL_BASE_MATRIX;
-       struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
 
        /* Enable CS3 */
        csa = readl(&matrix->ccr[6]) | AT91_MATRIX_CSA_EBI_CS3A;
@@ -62,23 +61,21 @@ static void pm9g45_nand_hw_init(void)
                AT91_SMC_MODE_TDF_CYCLE(3),
                &smc->cs[3].mode);
 
-       writel(1 << ATMEL_ID_PIOC, &pmc->pcer);
+       at91_periph_clk_enable(ATMEL_ID_PIOC);
 
 #ifdef CONFIG_SYS_NAND_READY_PIN
        /* Configure RDY/BSY */
-       at91_set_pio_input(CONFIG_SYS_NAND_READY_PIN, 1);
+       gpio_direction_input(CONFIG_SYS_NAND_READY_PIN);
 #endif
 
        /* Enable NandFlash */
-       at91_set_pio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
+       gpio_direction_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
 }
 #endif
 
 #ifdef CONFIG_MACB
 static void pm9g45_macb_hw_init(void)
 {
-       struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
-
        /*
         * PD2 enables the 50MHz oscillator for Ethernet PHY
         * 1 - enable
@@ -87,8 +84,7 @@ static void pm9g45_macb_hw_init(void)
        at91_set_pio_output(AT91_PIO_PORTD, 2, 1);
        at91_set_pio_value(AT91_PIO_PORTD, 2, 1); /* 1- enable, 0 - disable */
 
-       /* Enable clock */
-       writel(1 << ATMEL_ID_EMAC, &pmc->pcer);
+       at91_periph_clk_enable(ATMEL_ID_EMAC);
 
        /*
         * Disable pull-up on:
@@ -113,13 +109,10 @@ static void pm9g45_macb_hw_init(void)
 
 int board_early_init_f(void)
 {
-       struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
-
-       /* Enable clocks for all PIOs */
-       writel((1 << ATMEL_ID_PIOA) |
-               (1 << ATMEL_ID_PIOB) |
-               (1 << ATMEL_ID_PIOC) |
-               (1 << ATMEL_ID_PIODE), &pmc->pcer);
+       at91_periph_clk_enable(ATMEL_ID_PIOA);
+       at91_periph_clk_enable(ATMEL_ID_PIOB);
+       at91_periph_clk_enable(ATMEL_ID_PIOC);
+       at91_periph_clk_enable(ATMEL_ID_PIODE);
 
        at91_seriald_hw_init();
 
@@ -131,7 +124,7 @@ int board_init(void)
        /* arch number of AT91SAM9M10G45EK-Board */
        gd->bd->bi_arch_number = MACH_TYPE_PM9G45;
        /* adress of boot parameters */
-       gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
+       gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
 
 #ifdef CONFIG_CMD_NAND
        pm9g45_nand_hw_init();
@@ -146,15 +139,17 @@ int board_init(void)
 int dram_init(void)
 {
        /* dram_init must store complete ramsize in gd->ram_size */
-       gd->ram_size = get_ram_size((void *)PHYS_SDRAM,
-                               PHYS_SDRAM_SIZE);
+       gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,
+                                   CONFIG_SYS_SDRAM_SIZE);
        return 0;
 }
 
-void dram_init_banksize(void)
+int dram_init_banksize(void)
 {
-       gd->bd->bi_dram[0].start = PHYS_SDRAM;
-       gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
+       gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
+       gd->bd->bi_dram[0].size = CONFIG_SYS_SDRAM_SIZE;
+
+       return 0;
 }
 
 #ifdef CONFIG_RESET_PHY_R
@@ -165,7 +160,7 @@ void reset_phy(void)
         * Initialize ethernet HW addr prior to starting Linux,
         * needed for nfsroot
         */
-       eth_init(gd->bd);
+       eth_init();
 #endif
 }
 #endif