common: Drop linux/delay.h from common header

[oweals/u-boot.git] / board / nvidia / cardhu / cardhu.c

diff --git a/board/nvidia/cardhu/cardhu.c b/board/nvidia/cardhu/cardhu.c
index df4cb6b728bd2441e148e185db9a7e47628b2ce6..6848e3400466fb8ca80258ab649ee763a8ccd535 100644 (file)
--- a/board/nvidia/cardhu/cardhu.c
+++ b/board/nvidia/cardhu/cardhu.c
@@ -1,29 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
- *  (C) Copyright 2010-2012
+ *  (C) Copyright 2010-2013
  *  NVIDIA Corporation <www.nvidia.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
  */
 
 #include <common.h>
+#include <dm.h>
+#include <log.h>
 #include <asm/arch/pinmux.h>
+#include <asm/arch/gp_padctrl.h>
+#include <asm/arch/gpio.h>
+#include <asm/gpio.h>
+#include <linux/delay.h>
 #include "pinmux-config-cardhu.h"
+#include <i2c.h>
+
+#define PMU_I2C_ADDRESS                0x2D
+#define MAX_I2C_RETRY          3
 
 /*
  * Routine: pinmux_init
@@ -31,9 +24,109 @@
  */
 void pinmux_init(void)
 {
-       pinmux_config_table(tegra3_pinmux_common,
+       pinmux_config_pingrp_table(tegra3_pinmux_common,
                ARRAY_SIZE(tegra3_pinmux_common));
 
-       pinmux_config_table(unused_pins_lowpower,
+       pinmux_config_pingrp_table(unused_pins_lowpower,
                ARRAY_SIZE(unused_pins_lowpower));
+
+       /* Initialize any non-default pad configs (APB_MISC_GP regs) */
+       pinmux_config_drvgrp_table(cardhu_padctrl, ARRAY_SIZE(cardhu_padctrl));
+}
+
+#if defined(CONFIG_MMC_SDHCI_TEGRA)
+/*
+ * Do I2C/PMU writes to bring up SD card bus power
+ *
+ */
+void board_sdmmc_voltage_init(void)
+{
+       struct udevice *dev;
+       uchar reg, data_buffer[1];
+       int ret;
+       int i;
+
+       ret = i2c_get_chip_for_busnum(0, PMU_I2C_ADDRESS, 1, &dev);
+       if (ret) {
+               debug("%s: Cannot find PMIC I2C chip\n", __func__);
+               return;
+       }
+
+       /* TPS659110: LDO5_REG = 3.3v, ACTIVE to SDMMC1 */
+       data_buffer[0] = 0x65;
+       reg = 0x32;
+
+       for (i = 0; i < MAX_I2C_RETRY; ++i) {
+               if (dm_i2c_write(dev, reg, data_buffer, 1))
+                       udelay(100);
+       }
+
+       /* TPS659110: GPIO7_REG = PDEN, output a 1 to EN_3V3_SYS */
+       data_buffer[0] = 0x09;
+       reg = 0x67;
+
+       for (i = 0; i < MAX_I2C_RETRY; ++i) {
+               if (dm_i2c_write(dev, reg, data_buffer, 1))
+                       udelay(100);
+       }
+}
+
+/*
+ * Routine: pin_mux_mmc
+ * Description: setup the MMC muxes, power rails, etc.
+ */
+void pin_mux_mmc(void)
+{
+       /*
+        * NOTE: We don't do mmc-specific pin muxes here.
+        * They were done globally in pinmux_init().
+        */
+
+       /* Bring up the SDIO1 power rail */
+       board_sdmmc_voltage_init();
+}
+#endif /* MMC */
+
+#ifdef CONFIG_PCI_TEGRA
+int tegra_pcie_board_init(void)
+{
+       struct udevice *dev;
+       u8 addr, data[1];
+       int err;
+
+       err = i2c_get_chip_for_busnum(0, PMU_I2C_ADDRESS, 1, &dev);
+       if (err) {
+               debug("failed to find PMU bus\n");
+               return err;
+       }
+
+       /* TPS659110: LDO1_REG = 1.05V, ACTIVE */
+       data[0] = 0x15;
+       addr = 0x30;
+
+       err = dm_i2c_write(dev, addr, data, 1);
+       if (err) {
+               debug("failed to set VDD supply\n");
+               return err;
+       }
+
+       /* GPIO: PEX = 3.3V */
+       err = gpio_request(TEGRA_GPIO(L, 7), "PEX");
+       if (err < 0)
+               return err;
+
+       gpio_direction_output(TEGRA_GPIO(L, 7), 1);
+
+       /* TPS659110: LDO2_REG = 1.05V, ACTIVE */
+       data[0] = 0x15;
+       addr = 0x31;
+
+       err = dm_i2c_write(dev, addr, data, 1);
+       if (err) {
+               debug("failed to set AVDD supply\n");
+               return err;
+       }
+
+       return 0;
 }
+#endif /* PCI */