Use correct spelling of "U-Boot"

[oweals/u-boot.git] / board / freescale / p1010rdb / README.P1010RDB-PA

diff --git a/board/freescale/p1010rdb/README.P1010RDB-PA b/board/freescale/p1010rdb/README.P1010RDB-PA
index cde246dde2d822a3a1620a3bed8b0731aff9ae31..105942f7a54f40b92674d481b6c7327d34ac4710 100644 (file)
--- a/board/freescale/p1010rdb/README.P1010RDB-PA
+++ b/board/freescale/p1010rdb/README.P1010RDB-PA
@@ -95,7 +95,7 @@ is set to spi-flash instead of to SLIC/TDM/DAC and tdm_can_sel is set to TDM
 instead of to CAN/UART1.
 
 
-Build and burn u-boot to NOR flash
+Build and burn U-Boot to NOR flash
 ==================================
 1. Build u-boot.bin image
        export ARCH=powerpc
@@ -131,7 +131,7 @@ CPLD NOR bank selection register address 0xFFB00009 Bit[0]:
 1 - boot from lower 4 sectors
 
 
-Build and burn u-boot to NAND flash
+Build and burn U-Boot to NAND flash
 ===================================
 1. Build u-boot.bin image
        export ARCH=powerpc
@@ -146,7 +146,7 @@ Build and burn u-boot to NAND flash
 3. Check SW4[1:4]= 1000 and SW6[4]=1, then power on.
 
 
-Build and burn u-boot to SPI flash
+Build and burn U-Boot to SPI flash
 ==================================
 1. Build u-boot-spi.bin image
        make P1010RDB_SPIFLASH_config; make