trivial: Fix booot occurences

[oweals/u-boot.git] / board / freescale / p1010rdb / README.P1010RDB-PA

diff --git a/board/freescale/p1010rdb/README.P1010RDB-PA b/board/freescale/p1010rdb/README.P1010RDB-PA
index 46c61237c72790f11498e5039c4853d9ac71038a..0cb950d845e7e4e033091c92fd6be7f5b3ad44e9 100644 (file)
--- a/board/freescale/p1010rdb/README.P1010RDB-PA
+++ b/board/freescale/p1010rdb/README.P1010RDB-PA
@@ -88,7 +88,7 @@ Note: 1 stands for 'on', 0 stands for 'off'
 Setting of hwconfig
 ===================
 If FlexCAN or TDM is needed, please set "fsl_p1010mux:tdm_can=can" or
-"fsl_p1010mux:tdm_can=tdm" explicitly in u-booot prompt as below for example:
+"fsl_p1010mux:tdm_can=tdm" explicitly in u-boot prompt as below for example:
 setenv hwconfig "fsl_p1010mux:tdm_can=tdm;usb1:dr_mode=host,phy_type=utmi"
 By default, don't set fsl_p1010mux:tdm_can, in this case, spi chip selection
 is set to spi-flash instead of to SLIC/TDM/DAC and tdm_can_sel is set to TDM