libfdt: move headers to <linux/libfdt.h> and <linux/libfdt_env.h>

[oweals/u-boot.git] / board / freescale / mpc8610hpcd / mpc8610hpcd.c

diff --git a/board/freescale/mpc8610hpcd/mpc8610hpcd.c b/board/freescale/mpc8610hpcd/mpc8610hpcd.c
index d7dd470c3ffb5605b8166655b8ba67f3e3e2e7f9..0c307793bfae65d9cce6a2571cc8e17e4775e99b 100644 (file)
--- a/board/freescale/mpc8610hpcd/mpc8610hpcd.c
+++ b/board/freescale/mpc8610hpcd/mpc8610hpcd.c
@@ -1,23 +1,7 @@
 /*
- * Copyright 2007,2009-2010 Freescale Semiconductor, Inc.
+ * Copyright 2007,2009-2011 Freescale Semiconductor, Inc.
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.         See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #include <common.h>
@@ -26,15 +10,17 @@
 #include <asm/processor.h>
 #include <asm/immap_86xx.h>
 #include <asm/fsl_pci.h>
-#include <asm/fsl_ddr_sdram.h>
+#include <fsl_ddr_sdram.h>
 #include <asm/fsl_serdes.h>
 #include <i2c.h>
 #include <asm/io.h>
-#include <libfdt.h>
+#include <linux/libfdt.h>
 #include <fdt_support.h>
 #include <spd_sdram.h>
 #include <netdev.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 void sdram_init(void);
 phys_size_t fixed_sdram(void);
 int mpc8610hpcd_diu_init(void);
@@ -76,14 +62,14 @@ int misc_init_r(void)
        /* Verify if enabled */
        tmp_val = 0;
        i2c_read(0x38, 0x08, 1, &tmp_val, sizeof(tmp_val));
-       debug("DVI Encoder Read: 0x%02lx\n",tmp_val);
+       debug("DVI Encoder Read: 0x%02x\n", tmp_val);
 
        tmp_val = 0x10;
        i2c_write(0x38, 0x0A, 1, &tmp_val, sizeof(tmp_val));
        /* Verify if enabled */
        tmp_val = 0;
        i2c_read(0x38, 0x0A, 1, &tmp_val, sizeof(tmp_val));
-       debug("DVI Encoder Read: 0x%02lx\n",tmp_val);
+       debug("DVI Encoder Read: 0x%02x\n", tmp_val);
 
        return 0;
 }
@@ -94,11 +80,32 @@ int checkboard(void)
        volatile ccsr_local_mcm_t *mcm = &immap->im_local_mcm;
        u8 *pixis_base = (u8 *)PIXIS_BASE;
 
-       printf ("Board: MPC8610HPCD, System ID: 0x%02x, "
-               "System Version: 0x%02x, FPGA Version: 0x%02x\n",
+       printf ("Board: MPC8610HPCD, Sys ID: 0x%02x, "
+               "Sys Ver: 0x%02x, FPGA Ver: 0x%02x, ",
                in_8(pixis_base + PIXIS_ID), in_8(pixis_base + PIXIS_VER),
                in_8(pixis_base + PIXIS_PVER));
 
+       /*
+        * The MPC8610 HPCD workbook says that LBMAP=11 is the "normal" boot
+        * bank and LBMAP=00 is the alternate bank.  However, the pixis
+        * altbank code can only set bits, not clear them, so we treat 00 as
+        * the normal bank and 11 as the alternate.
+        */
+       switch (in_8(pixis_base + PIXIS_VBOOT) & 0xC0) {
+       case 0:
+               puts("vBank: Standard\n");
+               break;
+       case 0x40:
+               puts("Promjet\n");
+               break;
+       case 0x80:
+               puts("NAND\n");
+               break;
+       case 0xC0:
+               puts("vBank: Alternate\n");
+               break;
+       }
+
        mcm->abcr |= 0x00010000; /* 0 */
        mcm->hpmr3 = 0x80000008; /* 4c */
        mcm->hpmr0 = 0;
@@ -111,8 +118,7 @@ int checkboard(void)
 }
 
 
-phys_size_t
-initdram(int board_type)
+int dram_init(void)
 {
        phys_size_t dram_size = 0;
 
@@ -124,8 +130,10 @@ initdram(int board_type)
 
        setup_ddr_bat(dram_size);
 
-       puts(" DDR: ");
-       return dram_size;
+       debug(" DDR: ");
+       gd->ram_size = dram_size;
+
+       return 0;
 }
 
 
@@ -138,7 +146,7 @@ phys_size_t fixed_sdram(void)
 {
 #if !defined(CONFIG_SYS_RAMBOOT)
        volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
-       volatile ccsr_ddr_t *ddr = &immap->im_ddr1;
+       struct ccsr_ddr __iomem *ddr = &immap->im_ddr1;
        uint d_init;
 
        ddr->cs0_bnds = 0x0000001f;
@@ -206,11 +214,7 @@ static struct pci_config_table pci_fsl86xxads_config_table[] = {
 #endif
 
 
-static struct pci_controller pci1_hose = {
-#ifndef CONFIG_PCI_PNP
-config_table:pci_mpc86xxcts_config_table
-#endif
-};
+static struct pci_controller pci1_hose;
 #endif /* CONFIG_PCI */
 
 void pci_init_board(void)
@@ -218,12 +222,11 @@ void pci_init_board(void)
        volatile immap_t *immap = (immap_t *) CONFIG_SYS_CCSRBAR;
        volatile ccsr_gur_t *gur = &immap->im_gur;
        struct fsl_pci_info pci_info;
-       u32 devdisr, pordevsr;
+       u32 devdisr;
        int first_free_busno;
        int pci_agent;
 
        devdisr = in_be32(&gur->devdisr);
-       pordevsr = in_be32(&gur->pordevsr);
 
        first_free_busno = fsl_pcie_init_board(0);
 
@@ -240,6 +243,9 @@ void pci_init_board(void)
                        " (base address %lx)\n",
                        pci_agent ? "Agent" : "Host",
                        pci_info.regs);
+#ifndef CONFIG_PCI_PNP
+               pci1_hose.config_table = pci_mpc86xxcts_config_table;
+#endif
                first_free_busno = fsl_pci_init_port(&pci_info,
                                        &pci1_hose, first_free_busno);
        } else {
@@ -255,12 +261,13 @@ void pci_init_board(void)
 }
 
 #if defined(CONFIG_OF_BOARD_SETUP)
-void
-ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
 {
        ft_cpu_setup(blob, bd);
 
        FT_FSL_PCI_SETUP;
+
+       return 0;
 }
 #endif