// SPDX-License-Identifier: GPL-2.0+
/*
- * Copyright 2017 NXP
+ * Copyright 2017-2018 NXP
*/
#include <common.h>
+#include <env.h>
#include <i2c.h>
+#include <init.h>
+#include <log.h>
#include <malloc.h>
#include <errno.h>
#include <netdev.h>
#include <fsl_sec.h>
#include <asm/io.h>
#include <fdt_support.h>
+#include <linux/delay.h>
#include <linux/libfdt.h>
#include <fsl-mc/fsl_mc.h>
-#include <environment.h>
+#include <env_internal.h>
#include <asm/arch-fsl-layerscape/soc.h>
#include <asm/arch/ppa.h>
#include <hwconfig.h>
#include <asm/arch/fsl_serdes.h>
#include <asm/arch/soc.h>
+#include <asm/arch-fsl-layerscape/fsl_icid.h>
#include "../common/qixis.h"
#include "ls1088a_qixis.h"
DECLARE_GLOBAL_DATA_PTR;
+#ifdef CONFIG_TARGET_LS1088AQDS
+#ifdef CONFIG_TFABOOT
+struct ifc_regs ifc_cfg_ifc_nor_boot[CONFIG_SYS_FSL_IFC_BANK_COUNT] = {
+ {
+ "nor0",
+ CONFIG_SYS_NOR0_CSPR_EARLY,
+ CONFIG_SYS_NOR0_CSPR_EXT,
+ CONFIG_SYS_NOR_AMASK,
+ CONFIG_SYS_NOR_CSOR,
+ {
+ CONFIG_SYS_NOR_FTIM0,
+ CONFIG_SYS_NOR_FTIM1,
+ CONFIG_SYS_NOR_FTIM2,
+ CONFIG_SYS_NOR_FTIM3
+ },
+ 0,
+ CONFIG_SYS_NOR0_CSPR,
+ 0,
+ },
+ {
+ "nor1",
+ CONFIG_SYS_NOR1_CSPR_EARLY,
+ CONFIG_SYS_NOR0_CSPR_EXT,
+ CONFIG_SYS_NOR_AMASK_EARLY,
+ CONFIG_SYS_NOR_CSOR,
+ {
+ CONFIG_SYS_NOR_FTIM0,
+ CONFIG_SYS_NOR_FTIM1,
+ CONFIG_SYS_NOR_FTIM2,
+ CONFIG_SYS_NOR_FTIM3
+ },
+ 0,
+ CONFIG_SYS_NOR1_CSPR,
+ CONFIG_SYS_NOR_AMASK,
+ },
+ {
+ "nand",
+ CONFIG_SYS_NAND_CSPR,
+ CONFIG_SYS_NAND_CSPR_EXT,
+ CONFIG_SYS_NAND_AMASK,
+ CONFIG_SYS_NAND_CSOR,
+ {
+ CONFIG_SYS_NAND_FTIM0,
+ CONFIG_SYS_NAND_FTIM1,
+ CONFIG_SYS_NAND_FTIM2,
+ CONFIG_SYS_NAND_FTIM3
+ },
+ },
+ {
+ "fpga",
+ CONFIG_SYS_FPGA_CSPR,
+ CONFIG_SYS_FPGA_CSPR_EXT,
+ SYS_FPGA_AMASK,
+ CONFIG_SYS_FPGA_CSOR,
+ {
+ SYS_FPGA_CS_FTIM0,
+ SYS_FPGA_CS_FTIM1,
+ SYS_FPGA_CS_FTIM2,
+ SYS_FPGA_CS_FTIM3
+ },
+ 0,
+ SYS_FPGA_CSPR_FINAL,
+ 0,
+ }
+};
+
+struct ifc_regs ifc_cfg_qspi_nor_boot[CONFIG_SYS_FSL_IFC_BANK_COUNT] = {
+ {
+ "nand",
+ CONFIG_SYS_NAND_CSPR,
+ CONFIG_SYS_NAND_CSPR_EXT,
+ CONFIG_SYS_NAND_AMASK,
+ CONFIG_SYS_NAND_CSOR,
+ {
+ CONFIG_SYS_NAND_FTIM0,
+ CONFIG_SYS_NAND_FTIM1,
+ CONFIG_SYS_NAND_FTIM2,
+ CONFIG_SYS_NAND_FTIM3
+ },
+ },
+ {
+ "reserved",
+ },
+ {
+ "fpga",
+ CONFIG_SYS_FPGA_CSPR,
+ CONFIG_SYS_FPGA_CSPR_EXT,
+ SYS_FPGA_AMASK,
+ CONFIG_SYS_FPGA_CSOR,
+ {
+ SYS_FPGA_CS_FTIM0,
+ SYS_FPGA_CS_FTIM1,
+ SYS_FPGA_CS_FTIM2,
+ SYS_FPGA_CS_FTIM3
+ },
+ 0,
+ SYS_FPGA_CSPR_FINAL,
+ 0,
+ }
+};
+
+void ifc_cfg_boot_info(struct ifc_regs_info *regs_info)
+{
+ enum boot_src src = get_boot_src();
+
+ if (src == BOOT_SOURCE_QSPI_NOR)
+ regs_info->regs = ifc_cfg_qspi_nor_boot;
+ else
+ regs_info->regs = ifc_cfg_ifc_nor_boot;
+
+ regs_info->cs_size = CONFIG_SYS_FSL_IFC_BANK_COUNT;
+}
+#endif /* CONFIG_TFABOOT */
+#endif /* CONFIG_TARGET_LS1088AQDS */
+
int board_early_init_f(void)
{
#if defined(CONFIG_SYS_I2C_EARLY_INIT) && defined(CONFIG_TARGET_LS1088AQDS)
}
#endif
+int is_pb_board(void)
+{
+ u8 board_id;
+
+ board_id = QIXIS_READ(id);
+ if (board_id == LS1088ARDB_PB_BOARD)
+ return 1;
+ else
+ return 0;
+}
+
+int fixup_ls1088ardb_pb_banner(void *fdt)
+{
+ fdt_setprop_string(fdt, 0, "model", "LS1088ARDB-PB Board");
+
+ return 0;
+}
+
#if !defined(CONFIG_SPL_BUILD)
int checkboard(void)
{
+#ifdef CONFIG_TFABOOT
+ enum boot_src src = get_boot_src();
+#endif
char buf[64];
u8 sw;
static const char *const freq[] = {"100", "125", "156.25",
#ifdef CONFIG_TARGET_LS1088AQDS
printf("Board: LS1088A-QDS, ");
#else
- printf("Board: LS1088A-RDB, ");
+ if (is_pb_board())
+ printf("Board: LS1088ARDB-PB, ");
+ else
+ printf("Board: LS1088A-RDB, ");
#endif
sw = QIXIS_READ(arch);
sw = QIXIS_READ(brdcfg[0]);
sw = (sw & QIXIS_LBMAP_MASK) >> QIXIS_LBMAP_SHIFT;
+#ifdef CONFIG_TFABOOT
+ if (src == BOOT_SOURCE_SD_MMC)
+ puts("SD card\n");
+#else
#ifdef CONFIG_SD_BOOT
puts("SD card\n");
#endif
+#endif /* CONFIG_TFABOOT */
switch (sw) {
#ifdef CONFIG_TARGET_LS1088AQDS
case 0:
{
int ret;
+#ifndef CONFIG_DM_I2C
ret = i2c_write(I2C_MUX_PCA_ADDR_PRI, 0, 1, &ch, 1);
+#else
+ struct udevice *dev;
+
+ ret = i2c_get_chip_for_busnum(0, I2C_MUX_PCA_ADDR_PRI, 1, &dev);
+ if (!ret)
+ ret = dm_i2c_write(dev, 0, &ch, 1);
+#endif
if (ret) {
puts("PCA: failed to select proper channel\n");
return ret;
/* Access to Control/Shared register */
reg = 0x0;
+#ifndef CONFIG_DM_I2C
i2c_write(I2C_RETIMER_ADDR, 0xff, 1, ®, 1);
+#else
+ struct udevice *dev;
+
+ i2c_get_chip_for_busnum(0, I2C_RETIMER_ADDR, 1, &dev);
+ dm_i2c_write(dev, 0xff, ®, 1);
+#endif
/* Read device revision and ID */
+#ifndef CONFIG_DM_I2C
i2c_read(I2C_RETIMER_ADDR, 1, 1, ®, 1);
+#else
+ dm_i2c_read(dev, 1, ®, 1);
+#endif
debug("Retimer version id = 0x%x\n", reg);
/* Enable Broadcast. All writes target all channel register sets */
reg = 0x0c;
+#ifndef CONFIG_DM_I2C
i2c_write(I2C_RETIMER_ADDR, 0xff, 1, ®, 1);
+#else
+ dm_i2c_write(dev, 0xff, ®, 1);
+#endif
/* Reset Channel Registers */
+#ifndef CONFIG_DM_I2C
i2c_read(I2C_RETIMER_ADDR, 0, 1, ®, 1);
+#else
+ dm_i2c_read(dev, 0, ®, 1);
+#endif
reg |= 0x4;
+#ifndef CONFIG_DM_I2C
i2c_write(I2C_RETIMER_ADDR, 0, 1, ®, 1);
+#else
+ dm_i2c_write(dev, 0, ®, 1);
+#endif
/* Set data rate as 10.3125 Gbps */
reg = 0x90;
+#ifndef CONFIG_DM_I2C
i2c_write(I2C_RETIMER_ADDR, 0x60, 1, ®, 1);
+#else
+ dm_i2c_write(dev, 0x60, ®, 1);
+#endif
reg = 0xb3;
+#ifndef CONFIG_DM_I2C
i2c_write(I2C_RETIMER_ADDR, 0x61, 1, ®, 1);
+#else
+ dm_i2c_write(dev, 0x61, ®, 1);
+#endif
reg = 0x90;
+#ifndef CONFIG_DM_I2C
i2c_write(I2C_RETIMER_ADDR, 0x62, 1, ®, 1);
+#else
+ dm_i2c_write(dev, 0x62, ®, 1);
+#endif
reg = 0xb3;
+#ifndef CONFIG_DM_I2C
i2c_write(I2C_RETIMER_ADDR, 0x63, 1, ®, 1);
+#else
+ dm_i2c_write(dev, 0x63, ®, 1);
+#endif
reg = 0xcd;
+#ifndef CONFIG_DM_I2C
i2c_write(I2C_RETIMER_ADDR, 0x64, 1, ®, 1);
+#else
+ dm_i2c_write(dev, 0x64, ®, 1);
+#endif
/* Select VCO Divider to full rate (000) */
+#ifndef CONFIG_DM_I2C
i2c_read(I2C_RETIMER_ADDR, 0x2F, 1, ®, 1);
+#else
+ dm_i2c_read(dev, 0x2F, ®, 1);
+#endif
reg &= 0x0f;
reg |= 0x70;
+#ifndef CONFIG_DM_I2C
i2c_write(I2C_RETIMER_ADDR, 0x2F, 1, ®, 1);
+#else
+ dm_i2c_write(dev, 0x2F, ®, 1);
+#endif
#ifdef CONFIG_TARGET_LS1088AQDS
/* Retimer is connected to I2C1_CH5 */
/* Access to Control/Shared register */
reg = 0x0;
+#ifndef CONFIG_DM_I2C
i2c_write(I2C_RETIMER_ADDR2, 0xff, 1, ®, 1);
+#else
+ i2c_get_chip_for_busnum(0, I2C_RETIMER_ADDR2, 1, &dev);
+ dm_i2c_write(dev, 0xff, ®, 1);
+#endif
/* Read device revision and ID */
+#ifndef CONFIG_DM_I2C
i2c_read(I2C_RETIMER_ADDR2, 1, 1, ®, 1);
+#else
+ dm_i2c_read(dev, 1, ®, 1);
+#endif
debug("Retimer version id = 0x%x\n", reg);
/* Enable Broadcast. All writes target all channel register sets */
reg = 0x0c;
+#ifndef CONFIG_DM_I2C
i2c_write(I2C_RETIMER_ADDR2, 0xff, 1, ®, 1);
+#else
+ dm_i2c_write(dev, 0xff, ®, 1);
+#endif
/* Reset Channel Registers */
+#ifndef CONFIG_DM_I2C
i2c_read(I2C_RETIMER_ADDR2, 0, 1, ®, 1);
+#else
+ dm_i2c_read(dev, 0, ®, 1);
+#endif
reg |= 0x4;
+#ifndef CONFIG_DM_I2C
i2c_write(I2C_RETIMER_ADDR2, 0, 1, ®, 1);
+#else
+ dm_i2c_write(dev, 0, ®, 1);
+#endif
/* Set data rate as 10.3125 Gbps */
reg = 0x90;
+#ifndef CONFIG_DM_I2C
i2c_write(I2C_RETIMER_ADDR2, 0x60, 1, ®, 1);
+#else
+ dm_i2c_write(dev, 0x60, ®, 1);
+#endif
reg = 0xb3;
+#ifndef CONFIG_DM_I2C
i2c_write(I2C_RETIMER_ADDR2, 0x61, 1, ®, 1);
+#else
+ dm_i2c_write(dev, 0x61, ®, 1);
+#endif
reg = 0x90;
+#ifndef CONFIG_DM_I2C
i2c_write(I2C_RETIMER_ADDR2, 0x62, 1, ®, 1);
+#else
+ dm_i2c_write(dev, 0x62, ®, 1);
+#endif
reg = 0xb3;
+#ifndef CONFIG_DM_I2C
i2c_write(I2C_RETIMER_ADDR2, 0x63, 1, ®, 1);
+#else
+ dm_i2c_write(dev, 0x63, ®, 1);
+#endif
reg = 0xcd;
+#ifndef CONFIG_DM_I2C
i2c_write(I2C_RETIMER_ADDR2, 0x64, 1, ®, 1);
+#else
+ dm_i2c_write(dev, 0x64, ®, 1);
+#endif
/* Select VCO Divider to full rate (000) */
+#ifndef CONFIG_DM_I2C
i2c_read(I2C_RETIMER_ADDR2, 0x2F, 1, ®, 1);
+#else
+ dm_i2c_read(dev, 0x2F, ®, 1);
+#endif
reg &= 0x0f;
reg |= 0x70;
+#ifndef CONFIG_DM_I2C
i2c_write(I2C_RETIMER_ADDR2, 0x2F, 1, ®, 1);
+#else
+ dm_i2c_write(dev, 0x2F, ®, 1);
+#endif
+
#endif
/*return the default channel*/
select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
QIXIS_WRITE(brdcfg[5], brdcfg5);
}
#endif
+
+#ifdef CONFIG_TARGET_LS1088AQDS
+ u8 brdcfg4, brdcfg5;
+
+ if (hwconfig("dspi-on-board")) {
+ brdcfg4 = QIXIS_READ(brdcfg[4]);
+ brdcfg4 &= ~BRDCFG4_USBOSC_MASK;
+ brdcfg4 |= BRDCFG4_SPI;
+ QIXIS_WRITE(brdcfg[4], brdcfg4);
+
+ brdcfg5 = QIXIS_READ(brdcfg[5]);
+ brdcfg5 &= ~BRDCFG5_SPR_MASK;
+ brdcfg5 |= BRDCFG5_SPI_ON_BOARD;
+ QIXIS_WRITE(brdcfg[5], brdcfg5);
+ } else if (hwconfig("dspi-off-board")) {
+ brdcfg4 = QIXIS_READ(brdcfg[4]);
+ brdcfg4 &= ~BRDCFG4_USBOSC_MASK;
+ brdcfg4 |= BRDCFG4_SPI;
+ QIXIS_WRITE(brdcfg[4], brdcfg4);
+
+ brdcfg5 = QIXIS_READ(brdcfg[5]);
+ brdcfg5 &= ~BRDCFG5_SPR_MASK;
+ brdcfg5 |= BRDCFG5_SPI_OFF_BOARD;
+ QIXIS_WRITE(brdcfg[5], brdcfg5);
+ }
+#endif
return 0;
}
#endif
u8 chan = PWM_CHANNEL0;
/* Select the PAGE 0 using PMBus commands PAGE for VDD */
+#ifndef CONFIG_DM_I2C
ret = i2c_write(I2C_SVDD_MONITOR_ADDR,
PMBUS_CMD_PAGE, 1, &chan, 1);
+#else
+ struct udevice *dev;
+
+ ret = i2c_get_chip_for_busnum(0, I2C_SVDD_MONITOR_ADDR, 1, &dev);
+ if (!ret)
+ ret = dm_i2c_write(dev, PMBUS_CMD_PAGE,
+ &chan, 1);
+#endif
+
if (ret) {
printf("VID: failed to select VDD Page 0\n");
return ret;
}
/* Read the output voltage using PMBus command READ_VOUT */
+#ifndef CONFIG_DM_I2C
ret = i2c_read(I2C_SVDD_MONITOR_ADDR,
PMBUS_CMD_READ_VOUT, 1, (void *)&vcode, 2);
+#else
+ dm_i2c_read(dev, PMBUS_CMD_READ_VOUT, (void *)&vcode, 2);
+#endif
if (ret) {
printf("VID: failed to read the volatge\n");
return ret;
svdd & 0xFF, (svdd & 0xFF00) >> 8};
/* Write the desired voltage code to the SVDD regulator */
+#ifndef CONFIG_DM_I2C
ret = i2c_write(I2C_SVDD_MONITOR_ADDR,
PMBUS_CMD_PAGE_PLUS_WRITE, 1, (void *)&buff, 5);
+#else
+ struct udevice *dev;
+
+ ret = i2c_get_chip_for_busnum(0, I2C_SVDD_MONITOR_ADDR, 1, &dev);
+ if (!ret)
+ ret = dm_i2c_write(dev, PMBUS_CMD_PAGE_PLUS_WRITE,
+ (void *)&buff, 5);
+#endif
if (ret) {
printf("VID: I2C failed to write to the volatge regulator\n");
return -1;
printf("SVDD changing of RDB\n");
/* Read the BRDCFG54 via CLPD */
+#ifndef CONFIG_DM_I2C
ret = i2c_read(CONFIG_SYS_I2C_FPGA_ADDR,
QIXIS_BRDCFG4_OFFSET, 1, (void *)&brdcfg4, 1);
+#else
+ struct udevice *dev;
+
+ ret = i2c_get_chip_for_busnum(0, CONFIG_SYS_I2C_FPGA_ADDR, 1, &dev);
+ if (!ret)
+ ret = dm_i2c_read(dev, QIXIS_BRDCFG4_OFFSET,
+ (void *)&brdcfg4, 1);
+#endif
+
if (ret) {
printf("VID: I2C failed to read the CPLD BRDCFG4\n");
return -1;
brdcfg4 = brdcfg4 | 0x08;
/* Write to the BRDCFG4 */
+#ifndef CONFIG_DM_I2C
ret = i2c_write(CONFIG_SYS_I2C_FPGA_ADDR,
QIXIS_BRDCFG4_OFFSET, 1, (void *)&brdcfg4, 1);
+#else
+ ret = dm_i2c_write(dev, QIXIS_BRDCFG4_OFFSET,
+ (void *)&brdcfg4, 1);
+#endif
+
if (ret) {
debug("VID: I2C failed to set the SVDD CPLD BRDCFG4\n");
return -1;
#ifdef CONFIG_FSL_LS_PPA
ppa_init();
#endif
+
+#if !defined(CONFIG_SYS_EARLY_PCI_INIT) && defined(CONFIG_DM_ETH)
+ pci_init();
+#endif
+
return 0;
}
print_ddr_info(0);
}
-#if defined(CONFIG_ARCH_MISC_INIT)
-int arch_misc_init(void)
+#ifdef CONFIG_FSL_MC_ENET
+void board_quiesce_devices(void)
{
- return 0;
+ fsl_mc_ldpaa_exit(gd->bd);
}
-#endif
-#ifdef CONFIG_FSL_MC_ENET
void fdt_fixup_board_enet(void *fdt)
{
int offset;
offset = fdt_path_offset(fdt, "/fsl-mc");
if (offset < 0)
- offset = fdt_path_offset(fdt, "/fsl,dprc@0");
+ offset = fdt_path_offset(fdt, "/soc/fsl-mc");
if (offset < 0) {
printf("%s: ERROR: fsl-mc node not found in device tree (error %d)\n",
return;
}
- if ((get_mc_boot_status() == 0) && (get_dpl_apply_status() == 0))
+ if (get_mc_boot_status() == 0 &&
+ (is_lazy_dpl_addr_valid() || get_dpl_apply_status() == 0))
fdt_status_okay(fdt, offset);
else
fdt_status_fail(fdt, offset);
void fsl_fdt_fixup_flash(void *fdt)
{
int offset;
+#ifdef CONFIG_TFABOOT
+ u32 __iomem *dcfg_ccsr = (u32 __iomem *)DCFG_BASE;
+ u32 val;
+#endif
/*
* IFC-NOR and QSPI are muxed on SoC.
* disable QSPI node in dts in case QSPI is not enabled.
*/
+#ifdef CONFIG_TFABOOT
+ enum boot_src src = get_boot_src();
+ bool disable_ifc = false;
+
+ switch (src) {
+ case BOOT_SOURCE_IFC_NOR:
+ disable_ifc = false;
+ break;
+ case BOOT_SOURCE_QSPI_NOR:
+ disable_ifc = true;
+ break;
+ default:
+ val = in_le32(dcfg_ccsr + DCFG_RCWSR15 / 4);
+ if (DCFG_RCWSR15_IFCGRPABASE_QSPI == (val & (u32)0x3))
+ disable_ifc = true;
+ break;
+ }
+
+ if (disable_ifc) {
+ offset = fdt_path_offset(fdt, "/soc/ifc/nor");
+
+ if (offset < 0)
+ offset = fdt_path_offset(fdt, "/ifc/nor");
+ } else {
+ offset = fdt_path_offset(fdt, "/soc/quadspi");
+
+ if (offset < 0)
+ offset = fdt_path_offset(fdt, "/quadspi");
+ }
+
+#else
#ifdef CONFIG_FSL_QSPI
offset = fdt_path_offset(fdt, "/soc/ifc/nor");
if (offset < 0)
offset = fdt_path_offset(fdt, "/quadspi");
+#endif
#endif
if (offset < 0)
return;
int ft_board_setup(void *blob, bd_t *bd)
{
- int err, i;
- u64 base[CONFIG_NR_DRAM_BANKS];
- u64 size[CONFIG_NR_DRAM_BANKS];
+ int i;
+ u16 mc_memory_bank = 0;
+
+ u64 *base;
+ u64 *size;
+ u64 mc_memory_base = 0;
+ u64 mc_memory_size = 0;
+ u16 total_memory_banks;
ft_cpu_setup(blob, bd);
+ fdt_fixup_mc_ddr(&mc_memory_base, &mc_memory_size);
+
+ if (mc_memory_base != 0)
+ mc_memory_bank++;
+
+ total_memory_banks = CONFIG_NR_DRAM_BANKS + mc_memory_bank;
+
+ base = calloc(total_memory_banks, sizeof(u64));
+ size = calloc(total_memory_banks, sizeof(u64));
+
/* fixup DT for the two GPP DDR banks */
for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
base[i] = gd->bd->bi_dram[i].start;
size[1] = gd->arch.resv_ram - base[1];
#endif
- fdt_fixup_memory_banks(blob, base, size, CONFIG_NR_DRAM_BANKS);
+ if (mc_memory_base != 0) {
+ for (i = 0; i <= total_memory_banks; i++) {
+ if (base[i] == 0 && size[i] == 0) {
+ base[i] = mc_memory_base;
+ size[i] = mc_memory_size;
+ break;
+ }
+ }
+ }
+
+ fdt_fixup_memory_banks(blob, base, size, total_memory_banks);
+
+ fdt_fsl_mc_fixup_iommu_map_entry(blob);
fsl_fdt_fixup_flash(blob);
#ifdef CONFIG_FSL_MC_ENET
fdt_fixup_board_enet(blob);
- err = fsl_mc_ldpaa_exit(bd);
- if (err)
- return err;
#endif
+ fdt_fixup_icid(blob);
+
+ if (is_pb_board())
+ fixup_ls1088ardb_pb_banner(blob);
+
return 0;
}
#endif
#endif /* defined(CONFIG_SPL_BUILD) */
+
+#ifdef CONFIG_TFABOOT
+#ifdef CONFIG_MTD_NOR_FLASH
+int is_flash_available(void)
+{
+ char *env_hwconfig = env_get("hwconfig");
+ enum boot_src src = get_boot_src();
+ int is_nor_flash_available = 1;
+
+ switch (src) {
+ case BOOT_SOURCE_IFC_NOR:
+ is_nor_flash_available = 1;
+ break;
+ case BOOT_SOURCE_QSPI_NOR:
+ is_nor_flash_available = 0;
+ break;
+ /*
+ * In Case of SD boot,if qspi is defined in env_hwconfig
+ * disable nor flash probe.
+ */
+ default:
+ if (hwconfig_f("qspi", env_hwconfig))
+ is_nor_flash_available = 0;
+ break;
+ }
+ return is_nor_flash_available;
+}
+#endif
+
+#ifdef CONFIG_ENV_IS_IN_SPI_FLASH
+void *env_sf_get_env_addr(void)
+{
+ return (void *)(CONFIG_SYS_FSL_QSPI_BASE + CONFIG_ENV_OFFSET);
+}
+#endif
+#endif
projects / oweals / u-boot.git / blobdiff