mmc: move more driver config options to Kconfig

[oweals/u-boot.git] / board / davinci / da8xxevm / da850evm.c

diff --git a/board/davinci/da8xxevm/da850evm.c b/board/davinci/da8xxevm/da850evm.c
index 0c7aabb13492843a25d6f52260fb0f2b3217e1dc..37d2f54d3bdd9bbed85ed82622c2a7d24b8b7541 100644 (file)
--- a/board/davinci/da8xxevm/da850evm.c
+++ b/board/davinci/da8xxevm/da850evm.c
@@ -6,19 +6,7 @@
  * Copyright (C) 2009 Nick Thompson, GE Fanuc, Ltd. <nick.thompson@gefanuc.com>
  * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #include <common.h>
@@ -28,15 +16,15 @@
 #include <spi.h>
 #include <spi_flash.h>
 #include <asm/arch/hardware.h>
-#include <asm/arch/emif_defs.h>
+#include <asm/ti-common/davinci_nand.h>
 #include <asm/arch/emac_defs.h>
 #include <asm/arch/pinmux_defs.h>
 #include <asm/io.h>
 #include <asm/arch/davinci_misc.h>
-#include <asm/errno.h>
+#include <linux/errno.h>
 #include <hwconfig.h>
 
-#ifdef CONFIG_DAVINCI_MMC
+#ifdef CONFIG_MMC_DAVINCI
 #include <mmc.h>
 #include <asm/arch/sdmmc_defs.h>
 #endif
@@ -157,7 +145,7 @@ int misc_init_r(void)
         */
        if (!enetaddr_found) {
                if (!spi_mac_read) {
-                       if (is_valid_ether_addr(buff)) {
+                       if (is_valid_ethaddr(buff)) {
                                if (eth_setenv_enetaddr("ethaddr", buff)) {
                                        printf("Warning: Failed to "
                                        "set MAC address from SPI flash\n");
@@ -172,11 +160,11 @@ int misc_init_r(void)
                 * MAC address present in environment compare it with
                 * the MAC address in SPI flash and warn on mismatch
                 */
-               if (!spi_mac_read && is_valid_ether_addr(buff) &&
-                                               memcmp(env_enetaddr, buff, 6))
+               if (!spi_mac_read && is_valid_ethaddr(buff) &&
+                   memcmp(env_enetaddr, buff, 6))
                        printf("Warning: MAC address in SPI flash don't match "
                                        "with the MAC address in the environment\n");
-                       printf("Default using MAC address from environment\n");
+               printf("Default using MAC address from environment\n");
        }
 #endif
        uint8_t enetaddr[8];
@@ -202,14 +190,14 @@ int misc_init_r(void)
                if (eeprom_mac_read && memcmp(enetaddr, env_enetaddr, 6))
                        printf("Warning: MAC address in EEPROM don't match "
                                        "with the MAC address in the environment\n");
-                       printf("Default using MAC address from environment\n");
+               printf("Default using MAC address from environment\n");
        }
 
 #endif
        return 0;
 }
 
-#ifdef CONFIG_DAVINCI_MMC
+#ifdef CONFIG_MMC_DAVINCI
 static struct davinci_mmc mmc_sd0 = {
        .reg_base = (struct davinci_mmc_regs *)DAVINCI_MMC_SD0_BASE,
        .host_caps = MMC_MODE_4BIT,     /* DA850 supports only 4-bit SD/MMC */
@@ -231,7 +219,7 @@ static const struct pinmux_config gpio_pins[] = {
        /* GP0[11] is required for NOR to work on Rev 3 EVMs */
        { pinmux(0), 8, 4 },    /* GP0[11] */
 #endif
-#ifdef CONFIG_DAVINCI_MMC
+#ifdef CONFIG_MMC_DAVINCI
        /* GP0[11] is required for SD to work on Rev 3 EVMs */
        { pinmux(0),  8, 4 },   /* GP0[11] */
 #endif
@@ -262,7 +250,7 @@ const struct pinmux_resource pinmuxes[] = {
        PINMUX_ITEM(emifa_pins_nor),
 #endif
        PINMUX_ITEM(gpio_pins),
-#ifdef CONFIG_DAVINCI_MMC
+#ifdef CONFIG_MMC_DAVINCI
        PINMUX_ITEM(mmc0_pins),
 #endif
 };
@@ -275,7 +263,7 @@ const struct lpsc_resource lpsc[] = {
        { DAVINCI_LPSC_EMAC },  /* image download */
        { DAVINCI_LPSC_UART2 }, /* console */
        { DAVINCI_LPSC_GPIO },
-#ifdef CONFIG_DAVINCI_MMC
+#ifdef CONFIG_MMC_DAVINCI
        { DAVINCI_LPSC_MMC_SD },
 #endif
 };
@@ -335,10 +323,6 @@ int board_early_init_f(void)
 
 int board_init(void)
 {
-#if defined(CONFIG_USE_NOR) || defined(CONFIG_DAVINCI_MMC)
-       u32 val;
-#endif
-
 #ifndef CONFIG_USE_IRQ
        irq_init();
 #endif
@@ -378,22 +362,18 @@ int board_init(void)
 
 #ifdef CONFIG_USE_NOR
        /* Set the GPIO direction as output */
-       clrbits_be32((u32 *)GPIO_BANK0_REG_DIR_ADDR, (0x01 << 11));
+       clrbits_le32((u32 *)GPIO_BANK0_REG_DIR_ADDR, (0x01 << 11));
 
        /* Set the output as low */
-       val = readl(GPIO_BANK0_REG_SET_ADDR);
-       val |= (0x01 << 11);
-       writel(val, GPIO_BANK0_REG_CLR_ADDR);
+       writel(0x01 << 11, GPIO_BANK0_REG_CLR_ADDR);
 #endif
 
-#ifdef CONFIG_DAVINCI_MMC
+#ifdef CONFIG_MMC_DAVINCI
        /* Set the GPIO direction as output */
        clrbits_le32((u32 *)GPIO_BANK0_REG_DIR_ADDR, (0x01 << 11));
 
        /* Set the output as high */
-       val = readl(GPIO_BANK0_REG_SET_ADDR);
-       val |= (0x01 << 11);
-       writel(val, GPIO_BANK0_REG_SET_ADDR);
+       writel(0x01 << 11, GPIO_BANK0_REG_SET_ADDR);
 #endif
 
 #ifdef CONFIG_DRIVER_TI_EMAC