board: sama5d2_xplained: Convert to CONFIG_DM_VIDEO

[oweals/u-boot.git] / board / atmel / sama5d2_xplained / sama5d2_xplained.c

diff --git a/board/atmel/sama5d2_xplained/sama5d2_xplained.c b/board/atmel/sama5d2_xplained/sama5d2_xplained.c
index 57586530304531880c6a6f7b702b6d1b9d09c048..778142ac7161c2da494f101a31272daafb7e6464 100644 (file)
--- a/board/atmel/sama5d2_xplained/sama5d2_xplained.c
+++ b/board/atmel/sama5d2_xplained/sama5d2_xplained.c
@@ -6,10 +6,7 @@
  */
 
 #include <common.h>
-#include <atmel_hlcdc.h>
 #include <debug_uart.h>
-#include <lcd.h>
-#include <version.h>
 #include <asm/io.h>
 #include <asm/arch/at91_common.h>
 #include <asm/arch/atmel_pio4.h>
@@ -26,90 +23,15 @@ static void board_usb_hw_init(void)
        atmel_pio4_set_pio_output(AT91_PIO_PORTB, 10, 1);
 }
 
-#ifdef CONFIG_LCD
-vidinfo_t panel_info = {
-       .vl_col = 480,
-       .vl_row = 272,
-       .vl_clk = 9000000,
-       .vl_bpix = LCD_BPP,
-       .vl_tft = 1,
-       .vl_hsync_len = 41,
-       .vl_left_margin = 2,
-       .vl_right_margin = 2,
-       .vl_vsync_len = 11,
-       .vl_upper_margin = 2,
-       .vl_lower_margin = 2,
-       .mmio = ATMEL_BASE_LCDC,
-};
-
-/* No power up/down pin for the LCD pannel */
-void lcd_enable(void)  { /* Empty! */ }
-void lcd_disable(void) { /* Empty! */ }
-
-unsigned int has_lcdc(void)
+#ifdef CONFIG_BOARD_LATE_INIT
+int board_late_init(void)
 {
-       return 1;
-}
-
-static void board_lcd_hw_init(void)
-{
-       atmel_pio4_set_a_periph(AT91_PIO_PORTC, 28, 0); /* LCDPWM */
-       atmel_pio4_set_a_periph(AT91_PIO_PORTC, 29, 0); /* LCDDISP */
-       atmel_pio4_set_a_periph(AT91_PIO_PORTC, 30, 0); /* LCDVSYNC */
-       atmel_pio4_set_a_periph(AT91_PIO_PORTC, 31, 0); /* LCDHSYNC */
-       atmel_pio4_set_a_periph(AT91_PIO_PORTD,  0, 0); /* LCDPCK */
-       atmel_pio4_set_a_periph(AT91_PIO_PORTD,  1, 0); /* LCDDEN */
-
-       /* LCDDAT0 */
-       /* LCDDAT1 */
-       atmel_pio4_set_a_periph(AT91_PIO_PORTC, 10, 0); /* LCDDAT2 */
-       atmel_pio4_set_a_periph(AT91_PIO_PORTC, 11, 0); /* LCDDAT3 */
-       atmel_pio4_set_a_periph(AT91_PIO_PORTC, 12, 0); /* LCDDAT4 */
-       atmel_pio4_set_a_periph(AT91_PIO_PORTC, 13, 0); /* LCDDAT5 */
-       atmel_pio4_set_a_periph(AT91_PIO_PORTC, 14, 0); /* LCDDAT6 */
-       atmel_pio4_set_a_periph(AT91_PIO_PORTC, 15, 0); /* LCDDAT7 */
-
-       /* LCDDAT8 */
-       /* LCDDAT9 */
-       atmel_pio4_set_a_periph(AT91_PIO_PORTC, 16, 0); /* LCDDAT10 */
-       atmel_pio4_set_a_periph(AT91_PIO_PORTC, 17, 0); /* LCDDAT11 */
-       atmel_pio4_set_a_periph(AT91_PIO_PORTC, 18, 0); /* LCDDAT12 */
-       atmel_pio4_set_a_periph(AT91_PIO_PORTC, 19, 0); /* LCDDAT13 */
-       atmel_pio4_set_a_periph(AT91_PIO_PORTC, 20, 0); /* LCDDAT14 */
-       atmel_pio4_set_a_periph(AT91_PIO_PORTC, 21, 0); /* LCDDAT15 */
-
-       /* LCDD16 */
-       /* LCDD17 */
-       atmel_pio4_set_a_periph(AT91_PIO_PORTC, 22, 0); /* LCDDAT18 */
-       atmel_pio4_set_a_periph(AT91_PIO_PORTC, 23, 0); /* LCDDAT19 */
-       atmel_pio4_set_a_periph(AT91_PIO_PORTC, 24, 0); /* LCDDAT20 */
-       atmel_pio4_set_a_periph(AT91_PIO_PORTC, 25, 0); /* LCDDAT21 */
-       atmel_pio4_set_a_periph(AT91_PIO_PORTC, 26, 0); /* LCDDAT22 */
-       atmel_pio4_set_a_periph(AT91_PIO_PORTC, 27, 0); /* LCDDAT23 */
-
-       at91_periph_clk_enable(ATMEL_ID_LCDC);
-}
-
-#ifdef CONFIG_LCD_INFO
-void lcd_show_board_info(void)
-{
-       ulong dram_size;
-       int i;
-       char temp[32];
-
-       lcd_printf("%s\n", U_BOOT_VERSION);
-       lcd_printf("2015 ATMEL Corp\n");
-       lcd_printf("%s CPU at %s MHz\n", get_cpu_name(),
-                  strmhz(temp, get_cpu_clk_rate()));
-
-       dram_size = 0;
-       for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++)
-               dram_size += gd->bd->bi_dram[i].size;
-
-       lcd_printf("%ld MB SDRAM\n", dram_size >> 20);
+#ifdef CONFIG_DM_VIDEO
+       at91_video_show_board_info();
+#endif
+       return 0;
 }
-#endif /* CONFIG_LCD_INFO */
-#endif /* CONFIG_LCD */
+#endif
 
 #ifdef CONFIG_DEBUG_UART_BOARD_INIT
 static void board_uart1_hw_init(void)
@@ -142,9 +64,6 @@ int board_init(void)
        /* address of boot parameters */
        gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
 
-#ifdef CONFIG_LCD
-       board_lcd_hw_init();
-#endif
 #ifdef CONFIG_CMD_USB
        board_usb_hw_init();
 #endif