common: Drop linux/delay.h from common header

[oweals/u-boot.git] / board / advantech / dms-ba16 / dms-ba16.c

diff --git a/board/advantech/dms-ba16/dms-ba16.c b/board/advantech/dms-ba16/dms-ba16.c
index 8aa7ff1659d968119bc66275b5b884664d399dad..28e505e6c59b18653967153ece84e0338f0c2329 100644 (file)
--- a/board/advantech/dms-ba16/dms-ba16.c
+++ b/board/advantech/dms-ba16/dms-ba16.c
@@ -1,23 +1,25 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Copyright 2016 Timesys Corporation
  * Copyright 2016 Advantech Corporation
  * Copyright 2012 Freescale Semiconductor, Inc.
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
+#include <init.h>
+#include <net.h>
 #include <asm/arch/clock.h>
 #include <asm/arch/imx-regs.h>
 #include <asm/arch/iomux.h>
 #include <asm/arch/mx6-pins.h>
+#include <linux/delay.h>
 #include <linux/errno.h>
 #include <asm/gpio.h>
-#include <asm/imx-common/mxc_i2c.h>
-#include <asm/imx-common/iomux-v3.h>
-#include <asm/imx-common/boot_mode.h>
-#include <asm/imx-common/video.h>
+#include <asm/mach-imx/mxc_i2c.h>
+#include <asm/mach-imx/iomux-v3.h>
+#include <asm/mach-imx/boot_mode.h>
+#include <asm/mach-imx/video.h>
 #include <mmc.h>
-#include <fsl_esdhc.h>
+#include <fsl_esdhc_imx.h>
 #include <miiphy.h>
 #include <netdev.h>
 #include <asm/arch/mxc_hdmi.h>
@@ -25,6 +27,7 @@
 #include <asm/io.h>
 #include <asm/arch/sys_proto.h>
 #include <i2c.h>
+#include <input.h>
 #include <pwm.h>
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -103,8 +106,9 @@ static void setup_iomux_enet(void)
 
        /* Reset AR8033 PHY */
        gpio_direction_output(IMX_GPIO_NR(1, 28), 0);
-       udelay(500);
+       mdelay(10);
        gpio_set_value(IMX_GPIO_NR(1, 28), 1);
+       mdelay(1);
 }
 
 static iomux_v3_cfg_t const usdhc2_pads[] = {
@@ -220,7 +224,7 @@ static void setup_iomux_uart(void)
        imx_iomux_v3_setup_multiple_pads(uart4_pads, ARRAY_SIZE(uart4_pads));
 }
 
-#ifdef CONFIG_FSL_ESDHC
+#ifdef CONFIG_FSL_ESDHC_IMX
 struct fsl_esdhc_cfg usdhc_cfg[3] = {
        {USDHC2_BASE_ADDR},
        {USDHC3_BASE_ADDR},
@@ -303,7 +307,8 @@ static int mx6_rgmii_rework(struct phy_device *phydev)
        /* set debug port address: SerDes Test and System Mode Control */
        phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x05);
        /* enable rgmii tx clock delay */
-       phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x100);
+       /* set the reserved bits to avoid board specific voltage peak issue*/
+       phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x3D47);
 
        return 0;
 }
@@ -607,7 +612,7 @@ int board_late_init(void)
        pwm_enable(0);
 #endif
 
-#ifdef CONFIG_CMD_SATA
+#ifdef CONFIG_SATA
        setup_ba16_sata();
 #endif