common: Move reset_phy() to net.h
[oweals/u-boot.git] / board / LaCie / edminiv2 / edminiv2.c
index 80ec7faa049476ee7c57a98471fcd34e2e92c934..b5ffe8162f32cee00378081c7e2ceda5bc7ccaed 100644 (file)
@@ -1,70 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Copyright (C) 2010 Albert ARIBAUD <albert.u.boot@aribaud.net>
  *
  * (C) Copyright 2009
  * Marvell Semiconductor <www.marvell.com>
  * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #include <common.h>
 #include <miiphy.h>
+#include <net.h>
 #include <asm/arch/orion5x.h>
 #include "../common/common.h"
+#include <spl.h>
+#include <ns16550.h>
+#include <asm/mach-types.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
-/*
- * The ED Mini V2 is equipped with a Macronix MXLV400CB FLASH
- * which CFI does not properly detect, hence the LEGACY config.
- */
-#if defined(CONFIG_FLASH_CFI_LEGACY)
-#include <flash.h>
-ulong board_flash_get_legacy(ulong base, int banknum, flash_info_t *info)
-{
-       int sectsz[] = CONFIG_SYS_FLASH_SECTSZ;
-       int sect;
-
-       if (base != CONFIG_SYS_FLASH_BASE)
-               return 0;
-
-       info->size = 0;
-       info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
-       /* set each sector's start address and size based */
-       for (sect = 0; sect < CONFIG_SYS_MAX_FLASH_SECT; sect++) {
-               info->start[sect] = base+info->size;
-               info->size += sectsz[sect];
-       }
-       /* This flash must be accessed in 8-bits mode, no buffer. */
-       info->flash_id = 0x01000000;
-       info->portwidth = FLASH_CFI_8BIT;
-       info->chipwidth = FLASH_CFI_BY8;
-       info->buffer_size = 0;
-       /* timings are derived from the Macronix datasheet. */
-       info->erase_blk_tout = 1000;
-       info->write_tout = 10;
-       info->buffer_write_tout = 300;
-       /* Commands and addresses are for AMD mode 8-bit access. */
-       info->vendor = CFI_CMDSET_AMD_LEGACY;
-       info->cmd_reset = 0xF0;
-       info->interface = FLASH_CFI_X8;
-       info->legacy_unlock = 0;
-       info->ext_addr = 0;
-       info->addr_unlock1 = 0x00000aaa;
-       info->addr_unlock2 = 0x00000555;
-       /* Manufacturer Macronix, device MX29LV400CB, CFI 1.3. */
-       info->manufacturer_id = 0x22;
-       info->device_id = 0xBA;
-       info->device_id2 = 0;
-       info->cfi_version = 0x3133;
-       info->cfi_offset = 0x0000;
-       info->name = "MX29LV400CB";
-
-       return 1;
-}
-#endif                         /* CONFIG_SYS_FLASH_CFI */
-
 int board_init(void)
 {
        /* arch number of board */
@@ -83,3 +36,21 @@ void reset_phy(void)
        mv_phy_88e1116_init("egiga0", 8);
 }
 #endif /* CONFIG_RESET_PHY_R */
+
+/*
+ * SPL serial setup and NOR boot device selection
+ */
+
+#ifdef CONFIG_SPL_BUILD
+
+void spl_board_init(void)
+{
+       preloader_console_init();
+}
+
+u32 spl_boot_device(void)
+{
+       return BOOT_DEVICE_NOR;
+}
+
+#endif /* CONFIG_SPL_BUILD */