x86: apl: Add PUNIT driver

[oweals/u-boot.git] / arch / x86 / cpu / apollolake / punit.c

diff --git a/arch/x86/cpu/apollolake/punit.c b/arch/x86/cpu/apollolake/punit.c
new file mode 100644 (file)
index 0000000..1a131fb
--- /dev/null
+++ b/arch/x86/cpu/apollolake/punit.c
@@ -0,0 +1,94 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Google LLC
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <spl.h>
+#include <asm/cpu.h>
+#include <asm/cpu_common.h>
+#include <asm/intel_regs.h>
+#include <asm/io.h>
+#include <asm/pci.h>
+#include <asm/arch/systemagent.h>
+
+/*
+ * Punit Initialisation code. This all isn't documented, but
+ * this is the recipe.
+ */
+static int punit_init(struct udevice *dev)
+{
+       struct udevice *cpu;
+       u32 reg;
+       ulong start;
+       int ret;
+
+       /* Thermal throttle activation offset */
+       ret = uclass_first_device_err(UCLASS_CPU, &cpu);
+       if (ret)
+               return log_msg_ret("Cannot find CPU", ret);
+       cpu_configure_thermal_target(cpu);
+
+       /*
+        * Software Core Disable Mask (P_CR_CORE_DISABLE_MASK_0_0_0_MCHBAR).
+        * Enable all cores here.
+        */
+       writel(0, MCHBAR_REG(CORE_DISABLE_MASK));
+
+       /* P-Unit bring up */
+       reg = readl(MCHBAR_REG(BIOS_RESET_CPL));
+       if (reg == 0xffffffff) {
+               /* P-unit not found */
+               debug("Punit MMIO not available\n");
+               return -ENOENT;
+       }
+
+       /* Set Punit interrupt pin IPIN offset 3D */
+       dm_pci_write_config8(dev, PCI_INTERRUPT_PIN, 0x2);
+
+       /* Set PUINT IRQ to 24 and INTPIN LOCK */
+       writel(PUINT_THERMAL_DEVICE_IRQ_VEC_NUMBER |
+              PUINT_THERMAL_DEVICE_IRQ_LOCK,
+              MCHBAR_REG(PUNIT_THERMAL_DEVICE_IRQ));
+
+       /* Stage0 BIOS Reset Complete (RST_CPL) */
+       enable_bios_reset_cpl();
+
+       /*
+        * Poll for bit 8 to check if PCODE has completed its action in response
+        * to BIOS Reset complete.  We wait here till 1 ms for the bit to get
+        * set.
+        */
+       start = get_timer(0);
+       while (!(readl(MCHBAR_REG(BIOS_RESET_CPL)) & PCODE_INIT_DONE)) {
+               if (get_timer(start) > 1) {
+                       debug("PCODE Init Done timeout\n");
+                       return -ETIMEDOUT;
+               }
+               udelay(100);
+       }
+       debug("PUNIT init complete\n");
+
+       return 0;
+}
+
+static int apl_punit_probe(struct udevice *dev)
+{
+       if (spl_phase() == PHASE_SPL)
+               return punit_init(dev);
+
+       return 0;
+}
+
+static const struct udevice_id apl_syscon_ids[] = {
+       { .compatible = "intel,apl-punit", .data = X86_SYSCON_PUNIT },
+       { }
+};
+
+U_BOOT_DRIVER(syscon_intel_punit) = {
+       .name           = "intel_punit_syscon",
+       .id             = UCLASS_SYSCON,
+       .of_match       = apl_syscon_ids,
+       .probe          = apl_punit_probe,
+};