* (C) Copyright 2000-2002
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier: GPL-2.0+
*/
/*
#include <netdev.h>
#include <asm/cache.h>
#include <linux/compiler.h>
+#include <asm/io.h>
#if defined(CONFIG_OF_LIBFDT)
#include <libfdt.h>
-#include <libfdt_env.h>
#include <fdt_support.h>
#endif
if ((pvr >> 16) != 0x0050)
return -1;
- k = (immr << 16) | *((ushort *) & immap->im_cpm.cp_dparam[0xB0]);
+ k = (immr << 16) |
+ immap->im_cpm.cp_dparam16[PROFF_REVNUM / sizeof(u16)];
m = 0;
suf = "";
pre = 'M'; m = 1;
if (id_str == NULL)
id_str =
-# if defined(CONFIG_MPC852T)
- "PC852T";
-# elif defined(CONFIG_MPC859T)
+# if defined(CONFIG_MPC859T)
"PC859T";
-# elif defined(CONFIG_MPC859DSL)
- "PC859DSL";
-# elif defined(CONFIG_MPC866T)
- "PC866T";
# else
"PC866x"; /* Unknown chip from MPC866 family */
# endif
#else
printf (" at %s MHz: ", strmhz (buf, clock));
#endif
- printf ("%u kB I-Cache %u kB D-Cache",
- checkicache () >> 10,
- checkdcache () >> 10
- );
+ print_size(checkicache(), " I-Cache ");
+ print_size(checkdcache(), " D-Cache");
/* do we have a FEC (860T/P or 852/859/866/885)? */
if ((pvr >> 16) != 0x0050)
return -1;
- k = (immr << 16) | *((ushort *) & immap->im_cpm.cp_dparam[0xB0]);
+ k = (immr << 16) |
+ immap->im_cpm.cp_dparam16[PROFF_REVNUM / sizeof(u16)];
m = 0;
switch (k) {
printf ("unknown MPC857 (0x%08x)", k);
#endif
- printf (" at %s MHz:", strmhz (buf, clock));
+ printf(" at %s MHz: ", strmhz(buf, clock));
- printf (" %u kB I-Cache", checkicache () >> 10);
- printf (" %u kB D-Cache", checkdcache () >> 10);
+ print_size(checkicache(), " I-Cache ");
+ print_size(checkdcache(), " D-Cache");
/* lets check and see if we're running on a 862T (or P?) */
if ((pvr >> 16) != 0x0050)
return -1;
- k = (immr << 16) | *((ushort *) & immap->im_cpm.cp_dparam[0xB0]);
+ k = (immr << 16) |
+ in_be16(&immap->im_cpm.cp_dparam16[PROFF_REVNUM / sizeof(u16)]);
m = 0;
switch (k) {
if (suf)
printf ("PPC823ZTnn%s", suf);
- printf (" at %s MHz:", strmhz (buf, clock));
+ printf(" at %s MHz: ", strmhz(buf, clock));
- printf (" %u kB I-Cache", checkicache () >> 10);
- printf (" %u kB D-Cache", checkdcache () >> 10);
+ print_size(checkicache(), " I-Cache ");
+ print_size(checkdcache(), " D-Cache");
/* lets check and see if we're running on a 860T (or P?) */
if ((pvr >> 16) != 0x0050)
return -1;
- k = (immr << 16) | *((ushort *) & immap->im_cpm.cp_dparam[0xB0]);
+ k = (immr << 16) |
+ immap->im_cpm.cp_dparam16[PROFF_REVNUM / sizeof(u16)];
m = 0;
switch (k) {
default:
printf ("unknown MPC850 (0x%08x)", k);
}
- printf (" at %s MHz:", strmhz (buf, clock));
+ printf(" at %s MHz: ", strmhz(buf, clock));
- printf (" %u kB I-Cache", checkicache () >> 10);
- printf (" %u kB D-Cache", checkdcache () >> 10);
+ print_size(checkicache(), " I-Cache ");
+ print_size(checkdcache(), " D-Cache");
/* lets check and see if we're running on a 850T (or P?) */
/* ------------------------------------------------------------------------- */
-#ifndef CONFIG_LWMON
-
int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
ulong msr, addr;
return 1;
}
-#else /* CONFIG_LWMON */
-
-/*
- * On the LWMON board, the MCLR reset input of the PIC's on the board
- * uses a 47K/1n RC combination which has a 47us time constant. The
- * low signal on the HRESET pin of the CPU is only 512 clocks = 8 us
- * and thus too short to reset the external hardware. So we use the
- * watchdog to reset the board.
- */
-int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
- /* prevent triggering the watchdog */
- disable_interrupts ();
-
- /* make sure the watchdog is running */
- reset_8xx_watchdog ((immap_t *) CONFIG_SYS_IMMR);
-
- /* wait for watchdog reset */
- while (1) {};
-
- /* NOTREACHED */
- return 1;
-}
-
-#endif /* CONFIG_LWMON */
-
/* ------------------------------------------------------------------------- */
/*
}
#endif /* CONFIG_WATCHDOG */
-#if defined(CONFIG_WATCHDOG) || defined(CONFIG_LWMON)
+#if defined(CONFIG_WATCHDOG)
void reset_8xx_watchdog (volatile immap_t * immr)
{
-# if defined(CONFIG_LWMON)
- /*
- * The LWMON board uses a MAX6301 Watchdog
- * with the trigger pin connected to port PA.7
- *
- * (The old board version used a MAX706TESA Watchdog, which
- * had to be handled exactly the same.)
- */
-# define WATCHDOG_BIT 0x0100
- immr->im_ioport.iop_papar &= ~(WATCHDOG_BIT); /* GPIO */
- immr->im_ioport.iop_padir |= WATCHDOG_BIT; /* Output */
- immr->im_ioport.iop_paodr &= ~(WATCHDOG_BIT); /* active output */
-
- immr->im_ioport.iop_padat ^= WATCHDOG_BIT; /* Toggle WDI */
-# elif defined(CONFIG_KUP4K) || defined(CONFIG_KUP4X)
- /*
- * The KUP4 boards uses a TPS3705 Watchdog
- * with the trigger pin connected to port PA.5
- */
-# define WATCHDOG_BIT 0x0400
- immr->im_ioport.iop_papar &= ~(WATCHDOG_BIT); /* GPIO */
- immr->im_ioport.iop_padir |= WATCHDOG_BIT; /* Output */
- immr->im_ioport.iop_paodr &= ~(WATCHDOG_BIT); /* active output */
-
- immr->im_ioport.iop_padat ^= WATCHDOG_BIT; /* Toggle WDI */
-# else
/*
* All other boards use the MPC8xx Internal Watchdog
*/
immr->im_siu_conf.sc_swsr = 0x556c; /* write magic1 */
immr->im_siu_conf.sc_swsr = 0xaa39; /* write magic2 */
-# endif /* CONFIG_LWMON */
}
#endif /* CONFIG_WATCHDOG */
projects / oweals / u-boot.git / blobdiff