Convert CONFIG_CMD_REGINFO to Kconfig

[oweals/u-boot.git] / arch / powerpc / cpu / mpc85xx / Kconfig

diff --git a/arch/powerpc/cpu/mpc85xx/Kconfig b/arch/powerpc/cpu/mpc85xx/Kconfig
index 31c09649946baf46b2dd5aea9c0d944a852cff0a..ccdf103624ccad44161d4a0c3fdc101d3c8dc4e5 100644 (file)
--- a/arch/powerpc/cpu/mpc85xx/Kconfig
+++ b/arch/powerpc/cpu/mpc85xx/Kconfig
@@ -4,6 +4,14 @@ menu "mpc85xx CPU"
 config SYS_CPU
        default "mpc85xx"
 
+config CMD_ERRATA
+       bool "Enable the 'errata' command"
+       depends on MPC85xx
+       default y
+       help
+         This enables the 'errata' command which displays a list of errata
+         work-arounds which are enabled for the current board.
+
 choice
        prompt "Target select"
        optional
@@ -11,6 +19,7 @@ choice
 config TARGET_SBC8548
        bool "Support sbc8548"
        select ARCH_MPC8548
+       imply ENV_IS_IN_FLASH
 
 config TARGET_SOCRATES
        bool "Support socrates"
@@ -55,34 +64,35 @@ config TARGET_P3041DS
        select PHYS_64BIT
        select ARCH_P3041
        select BOARD_LATE_INIT if CHAIN_OF_TRUST
+       imply CMD_SATA
 
 config TARGET_P4080DS
        bool "Support P4080DS"
        select PHYS_64BIT
        select ARCH_P4080
        select BOARD_LATE_INIT if CHAIN_OF_TRUST
+       imply CMD_SATA
 
 config TARGET_P5020DS
        bool "Support P5020DS"
        select PHYS_64BIT
        select ARCH_P5020
        select BOARD_LATE_INIT if CHAIN_OF_TRUST
+       imply CMD_SATA
 
 config TARGET_P5040DS
        bool "Support P5040DS"
        select PHYS_64BIT
        select ARCH_P5040
        select BOARD_LATE_INIT if CHAIN_OF_TRUST
+       imply CMD_SATA
 
 config TARGET_MPC8536DS
        bool "Support MPC8536DS"
        select ARCH_MPC8536
 # Use DDR3 controller with DDR2 DIMMs on this board
        select SYS_FSL_DDRC_GEN3
-
-config TARGET_MPC8540ADS
-       bool "Support MPC8540ADS"
-       select ARCH_MPC8540
+       imply CMD_SATA
 
 config TARGET_MPC8541CDS
        bool "Support MPC8541CDS"
@@ -95,15 +105,12 @@ config TARGET_MPC8544DS
 config TARGET_MPC8548CDS
        bool "Support MPC8548CDS"
        select ARCH_MPC8548
+       imply ENV_IS_IN_FLASH
 
 config TARGET_MPC8555CDS
        bool "Support MPC8555CDS"
        select ARCH_MPC8555
 
-config TARGET_MPC8560ADS
-       bool "Support MPC8560ADS"
-       select ARCH_MPC8560
-
 config TARGET_MPC8568MDS
        bool "Support MPC8568MDS"
        select ARCH_MPC8568
@@ -117,6 +124,7 @@ config TARGET_MPC8572DS
        select ARCH_MPC8572
 # Use DDR3 controller with DDR2 DIMMs on this board
        select SYS_FSL_DDRC_GEN3
+       imply SCSI
 
 config TARGET_P1010RDB_PA
        bool "Support P1010RDB_PA"
@@ -124,6 +132,8 @@ config TARGET_P1010RDB_PA
        select BOARD_LATE_INIT if CHAIN_OF_TRUST
        select SUPPORT_SPL
        select SUPPORT_TPL
+       imply CMD_EEPROM
+       imply CMD_SATA
 
 config TARGET_P1010RDB_PB
        bool "Support P1010RDB_PB"
@@ -131,64 +141,84 @@ config TARGET_P1010RDB_PB
        select BOARD_LATE_INIT if CHAIN_OF_TRUST
        select SUPPORT_SPL
        select SUPPORT_TPL
+       imply CMD_EEPROM
+       imply CMD_SATA
 
 config TARGET_P1022DS
        bool "Support P1022DS"
        select ARCH_P1022
        select SUPPORT_SPL
        select SUPPORT_TPL
+       imply CMD_SATA
 
 config TARGET_P1023RDB
        bool "Support P1023RDB"
        select ARCH_P1023
+       imply CMD_EEPROM
 
 config TARGET_P1020MBG
        bool "Support P1020MBG-PC"
        select SUPPORT_SPL
        select SUPPORT_TPL
        select ARCH_P1020
+       imply CMD_EEPROM
+       imply CMD_SATA
 
 config TARGET_P1020RDB_PC
        bool "Support P1020RDB-PC"
        select SUPPORT_SPL
        select SUPPORT_TPL
        select ARCH_P1020
+       imply CMD_EEPROM
+       imply CMD_SATA
 
 config TARGET_P1020RDB_PD
        bool "Support P1020RDB-PD"
        select SUPPORT_SPL
        select SUPPORT_TPL
        select ARCH_P1020
+       imply CMD_EEPROM
+       imply CMD_SATA
 
 config TARGET_P1020UTM
        bool "Support P1020UTM"
        select SUPPORT_SPL
        select SUPPORT_TPL
        select ARCH_P1020
+       imply CMD_EEPROM
+       imply CMD_SATA
 
 config TARGET_P1021RDB
        bool "Support P1021RDB"
        select SUPPORT_SPL
        select SUPPORT_TPL
        select ARCH_P1021
+       imply CMD_EEPROM
+       imply CMD_SATA
 
 config TARGET_P1024RDB
        bool "Support P1024RDB"
        select SUPPORT_SPL
        select SUPPORT_TPL
        select ARCH_P1024
+       imply CMD_EEPROM
+       imply CMD_SATA
 
 config TARGET_P1025RDB
        bool "Support P1025RDB"
        select SUPPORT_SPL
        select SUPPORT_TPL
        select ARCH_P1025
+       imply CMD_EEPROM
+       imply CMD_SATA
 
 config TARGET_P2020RDB
        bool "Support P2020RDB-PC"
        select SUPPORT_SPL
        select SUPPORT_TPL
        select ARCH_P2020
+       imply CMD_EEPROM
+       imply CMD_SATA
 
 config TARGET_P1_TWR
        bool "Support p1_twr"
@@ -199,6 +229,7 @@ config TARGET_P2041RDB
        select ARCH_P2041
        select BOARD_LATE_INIT if CHAIN_OF_TRUST
        select PHYS_64BIT
+       imply CMD_SATA
 
 config TARGET_QEMU_PPCE500
        bool "Support qemu-ppce500"
@@ -211,6 +242,8 @@ config TARGET_T1024QDS
        select BOARD_LATE_INIT if CHAIN_OF_TRUST
        select SUPPORT_SPL
        select PHYS_64BIT
+       imply CMD_EEPROM
+       imply CMD_SATA
 
 config TARGET_T1023RDB
        bool "Support T1023RDB"
@@ -218,6 +251,7 @@ config TARGET_T1023RDB
        select BOARD_LATE_INIT if CHAIN_OF_TRUST
        select SUPPORT_SPL
        select PHYS_64BIT
+       imply CMD_EEPROM
 
 config TARGET_T1024RDB
        bool "Support T1024RDB"
@@ -225,12 +259,15 @@ config TARGET_T1024RDB
        select BOARD_LATE_INIT if CHAIN_OF_TRUST
        select SUPPORT_SPL
        select PHYS_64BIT
+       imply CMD_EEPROM
 
 config TARGET_T1040QDS
        bool "Support T1040QDS"
        select ARCH_T1040
        select BOARD_LATE_INIT if CHAIN_OF_TRUST
        select PHYS_64BIT
+       imply CMD_EEPROM
+       imply CMD_SATA
 
 config TARGET_T1040RDB
        bool "Support T1040RDB"
@@ -238,6 +275,7 @@ config TARGET_T1040RDB
        select BOARD_LATE_INIT if CHAIN_OF_TRUST
        select SUPPORT_SPL
        select PHYS_64BIT
+       imply CMD_SATA
 
 config TARGET_T1040D4RDB
        bool "Support T1040D4RDB"
@@ -245,6 +283,7 @@ config TARGET_T1040D4RDB
        select BOARD_LATE_INIT if CHAIN_OF_TRUST
        select SUPPORT_SPL
        select PHYS_64BIT
+       imply CMD_SATA
 
 config TARGET_T1042RDB
        bool "Support T1042RDB"
@@ -252,6 +291,7 @@ config TARGET_T1042RDB
        select BOARD_LATE_INIT if CHAIN_OF_TRUST
        select SUPPORT_SPL
        select PHYS_64BIT
+       imply CMD_SATA
 
 config TARGET_T1042D4RDB
        bool "Support T1042D4RDB"
@@ -259,6 +299,7 @@ config TARGET_T1042D4RDB
        select BOARD_LATE_INIT if CHAIN_OF_TRUST
        select SUPPORT_SPL
        select PHYS_64BIT
+       imply CMD_SATA
 
 config TARGET_T1042RDB_PI
        bool "Support T1042RDB_PI"
@@ -266,6 +307,7 @@ config TARGET_T1042RDB_PI
        select BOARD_LATE_INIT if CHAIN_OF_TRUST
        select SUPPORT_SPL
        select PHYS_64BIT
+       imply CMD_SATA
 
 config TARGET_T2080QDS
        bool "Support T2080QDS"
@@ -273,6 +315,7 @@ config TARGET_T2080QDS
        select BOARD_LATE_INIT if CHAIN_OF_TRUST
        select SUPPORT_SPL
        select PHYS_64BIT
+       imply CMD_SATA
 
 config TARGET_T2080RDB
        bool "Support T2080RDB"
@@ -280,6 +323,7 @@ config TARGET_T2080RDB
        select BOARD_LATE_INIT if CHAIN_OF_TRUST
        select SUPPORT_SPL
        select PHYS_64BIT
+       imply CMD_SATA
 
 config TARGET_T2081QDS
        bool "Support T2081QDS"
@@ -293,6 +337,7 @@ config TARGET_T4160QDS
        select BOARD_LATE_INIT if CHAIN_OF_TRUST
        select SUPPORT_SPL
        select PHYS_64BIT
+       imply CMD_SATA
 
 config TARGET_T4160RDB
        bool "Support T4160RDB"
@@ -306,12 +351,14 @@ config TARGET_T4240QDS
        select BOARD_LATE_INIT if CHAIN_OF_TRUST
        select SUPPORT_SPL
        select PHYS_64BIT
+       imply CMD_SATA
 
 config TARGET_T4240RDB
        bool "Support T4240RDB"
        select ARCH_T4240
        select SUPPORT_SPL
        select PHYS_64BIT
+       imply CMD_SATA
 
 config TARGET_CONTROLCENTERD
        bool "Support controlcenterd"
@@ -341,6 +388,7 @@ config TARGET_XPEDITE550X
 config TARGET_UCP1020
        bool "Support uCP1020"
        select ARCH_P1020
+       imply CMD_SATA
 
 config TARGET_CYRUS_P5020
        bool "Support Varisys Cyrus P5020"
@@ -377,6 +425,9 @@ config ARCH_B4420
        select SYS_FSL_SEC_COMPAT_4
        select SYS_PPC64
        select FSL_IFC
+       imply CMD_EEPROM
+       imply CMD_NAND
+       imply CMD_REGINFO
 
 config ARCH_B4860
        bool
@@ -402,6 +453,9 @@ config ARCH_B4860
        select SYS_FSL_SEC_COMPAT_4
        select SYS_PPC64
        select FSL_IFC
+       imply CMD_EEPROM
+       imply CMD_NAND
+       imply CMD_REGINFO
 
 config ARCH_BSC9131
        bool
@@ -415,6 +469,9 @@ config ARCH_BSC9131
        select SYS_FSL_SEC_BE
        select SYS_FSL_SEC_COMPAT_4
        select FSL_IFC
+       imply CMD_EEPROM
+       imply CMD_NAND
+       imply CMD_REGINFO
 
 config ARCH_BSC9132
        bool
@@ -432,6 +489,11 @@ config ARCH_BSC9132
        select SYS_FSL_SEC_COMPAT_4
        select SYS_PPC_E500_USE_DEBUG_TLB
        select FSL_IFC
+       imply CMD_EEPROM
+       imply CMD_MTDPARTS
+       imply CMD_NAND
+       imply CMD_PCI
+       imply CMD_REGINFO
 
 config ARCH_C29X
        bool
@@ -445,6 +507,9 @@ config ARCH_C29X
        select SYS_FSL_SEC_COMPAT_6
        select SYS_PPC_E500_USE_DEBUG_TLB
        select FSL_IFC
+       imply CMD_NAND
+       imply CMD_PCI
+       imply CMD_REGINFO
 
 config ARCH_MPC8536
        bool
@@ -458,6 +523,9 @@ config ARCH_MPC8536
        select SYS_FSL_SEC_COMPAT_2
        select SYS_PPC_E500_USE_DEBUG_TLB
        select FSL_ELBC
+       imply CMD_NAND
+       imply CMD_SATA
+       imply CMD_REGINFO
 
 config ARCH_MPC8540
        bool
@@ -497,6 +565,8 @@ config ARCH_MPC8548
        select SYS_FSL_SEC_BE
        select SYS_FSL_SEC_COMPAT_2
        select SYS_PPC_E500_USE_DEBUG_TLB
+       imply ENV_IS_IN_FLASH
+       imply CMD_REGINFO
 
 config ARCH_MPC8555
        bool
@@ -529,6 +599,7 @@ config ARCH_MPC8569
        select SYS_FSL_SEC_BE
        select SYS_FSL_SEC_COMPAT_2
        select FSL_ELBC
+       imply CMD_NAND
 
 config ARCH_MPC8572
        bool
@@ -544,6 +615,8 @@ config ARCH_MPC8572
        select SYS_FSL_SEC_COMPAT_2
        select SYS_PPC_E500_USE_DEBUG_TLB
        select FSL_ELBC
+       imply CMD_NAND
+       imply ENV_IS_IN_FLASH
 
 config ARCH_P1010
        bool
@@ -565,6 +638,12 @@ config ARCH_P1010
        select SYS_FSL_SEC_COMPAT_4
        select SYS_PPC_E500_USE_DEBUG_TLB
        select FSL_IFC
+       imply CMD_EEPROM
+       imply CMD_MTDPARTS
+       imply CMD_NAND
+       imply CMD_SATA
+       imply CMD_PCI
+       imply CMD_REGINFO
 
 config ARCH_P1011
        bool
@@ -593,6 +672,10 @@ config ARCH_P1020
        select SYS_FSL_SEC_COMPAT_2
        select SYS_PPC_E500_USE_DEBUG_TLB
        select FSL_ELBC
+       imply CMD_NAND
+       imply CMD_SATA
+       imply CMD_PCI
+       imply CMD_REGINFO
 
 config ARCH_P1021
        bool
@@ -607,6 +690,10 @@ config ARCH_P1021
        select SYS_FSL_SEC_COMPAT_2
        select SYS_PPC_E500_USE_DEBUG_TLB
        select FSL_ELBC
+       imply CMD_REGINFO
+       imply CMD_NAND
+       imply CMD_SATA
+       imply CMD_REGINFO
 
 config ARCH_P1022
        bool
@@ -649,6 +736,11 @@ config ARCH_P1024
        select SYS_FSL_SEC_COMPAT_2
        select SYS_PPC_E500_USE_DEBUG_TLB
        select FSL_ELBC
+       imply CMD_EEPROM
+       imply CMD_NAND
+       imply CMD_SATA
+       imply CMD_PCI
+       imply CMD_REGINFO
 
 config ARCH_P1025
        bool
@@ -663,6 +755,8 @@ config ARCH_P1025
        select SYS_FSL_SEC_COMPAT_2
        select SYS_PPC_E500_USE_DEBUG_TLB
        select FSL_ELBC
+       imply CMD_SATA
+       imply CMD_REGINFO
 
 config ARCH_P2020
        bool
@@ -678,6 +772,9 @@ config ARCH_P2020
        select SYS_FSL_SEC_COMPAT_2
        select SYS_PPC_E500_USE_DEBUG_TLB
        select FSL_ELBC
+       imply CMD_EEPROM
+       imply CMD_NAND
+       imply CMD_REGINFO
 
 config ARCH_P2041
        bool
@@ -700,6 +797,7 @@ config ARCH_P2041
        select SYS_FSL_SEC_BE
        select SYS_FSL_SEC_COMPAT_4
        select FSL_ELBC
+       imply CMD_NAND
 
 config ARCH_P3041
        bool
@@ -724,6 +822,9 @@ config ARCH_P3041
        select SYS_FSL_SEC_BE
        select SYS_FSL_SEC_COMPAT_4
        select FSL_ELBC
+       imply CMD_NAND
+       imply CMD_SATA
+       imply CMD_REGINFO
 
 config ARCH_P4080
        bool
@@ -759,6 +860,8 @@ config ARCH_P4080
        select SYS_FSL_SEC_BE
        select SYS_FSL_SEC_COMPAT_4
        select FSL_ELBC
+       imply CMD_SATA
+       imply CMD_REGINFO
 
 config ARCH_P5020
        bool
@@ -780,6 +883,8 @@ config ARCH_P5020
        select SYS_FSL_SEC_COMPAT_4
        select SYS_PPC64
        select FSL_ELBC
+       imply CMD_SATA
+       imply CMD_REGINFO
 
 config ARCH_P5040
        bool
@@ -801,6 +906,8 @@ config ARCH_P5040
        select SYS_FSL_SEC_COMPAT_4
        select SYS_PPC64
        select FSL_ELBC
+       imply CMD_SATA
+       imply CMD_REGINFO
 
 config ARCH_QEMU_E500
        bool
@@ -821,6 +928,9 @@ config ARCH_T1023
        select SYS_FSL_SEC_BE
        select SYS_FSL_SEC_COMPAT_5
        select FSL_IFC
+       imply CMD_EEPROM
+       imply CMD_NAND
+       imply CMD_REGINFO
 
 config ARCH_T1024
        bool
@@ -838,6 +948,10 @@ config ARCH_T1024
        select SYS_FSL_SEC_BE
        select SYS_FSL_SEC_COMPAT_5
        select FSL_IFC
+       imply CMD_EEPROM
+       imply CMD_NAND
+       imply CMD_MTDPARTS
+       imply CMD_REGINFO
 
 config ARCH_T1040
        bool
@@ -856,6 +970,10 @@ config ARCH_T1040
        select SYS_FSL_SEC_BE
        select SYS_FSL_SEC_COMPAT_5
        select FSL_IFC
+       imply CMD_MTDPARTS
+       imply CMD_NAND
+       imply CMD_SATA
+       imply CMD_REGINFO
 
 config ARCH_T1042
        bool
@@ -874,6 +992,10 @@ config ARCH_T1042
        select SYS_FSL_SEC_BE
        select SYS_FSL_SEC_COMPAT_5
        select FSL_IFC
+       imply CMD_MTDPARTS
+       imply CMD_NAND
+       imply CMD_SATA
+       imply CMD_REGINFO
 
 config ARCH_T2080
        bool
@@ -896,6 +1018,9 @@ config ARCH_T2080
        select SYS_FSL_SEC_COMPAT_4
        select SYS_PPC64
        select FSL_IFC
+       imply CMD_SATA
+       imply CMD_NAND
+       imply CMD_REGINFO
 
 config ARCH_T2081
        bool
@@ -916,6 +1041,8 @@ config ARCH_T2081
        select SYS_FSL_SEC_COMPAT_4
        select SYS_PPC64
        select FSL_IFC
+       imply CMD_NAND
+       imply CMD_REGINFO
 
 config ARCH_T4160
        bool
@@ -937,6 +1064,9 @@ config ARCH_T4160
        select SYS_FSL_SEC_COMPAT_4
        select SYS_PPC64
        select FSL_IFC
+       imply CMD_SATA
+       imply CMD_NAND
+       imply CMD_REGINFO
 
 config ARCH_T4240
        bool
@@ -961,6 +1091,9 @@ config ARCH_T4240
        select SYS_FSL_SEC_COMPAT_4
        select SYS_PPC64
        select FSL_IFC
+       imply CMD_SATA
+       imply CMD_NAND
+       imply CMD_REGINFO
 
 config BOOKE
        bool
@@ -974,6 +1107,7 @@ config E500
 
 config E500MC
        bool
+       imply CMD_PCI
        help
                Enble PowerPC E500MC core
 
@@ -1363,12 +1497,10 @@ source "board/freescale/bsc9132qds/Kconfig"
 source "board/freescale/c29xpcie/Kconfig"
 source "board/freescale/corenet_ds/Kconfig"
 source "board/freescale/mpc8536ds/Kconfig"
-source "board/freescale/mpc8540ads/Kconfig"
 source "board/freescale/mpc8541cds/Kconfig"
 source "board/freescale/mpc8544ds/Kconfig"
 source "board/freescale/mpc8548cds/Kconfig"
 source "board/freescale/mpc8555cds/Kconfig"
-source "board/freescale/mpc8560ads/Kconfig"
 source "board/freescale/mpc8568mds/Kconfig"
 source "board/freescale/mpc8569mds/Kconfig"
 source "board/freescale/mpc8572ds/Kconfig"