+/* SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause */
/*
* Copyright (C) 2018, STMicroelectronics - All Rights Reserved
- *
- * SPDX-License-Identifier: GPL-2.0+ BSD-3-Clause
*/
#ifndef _MACH_STM32_H_
#define _MACH_STM32_H_
+#ifndef __ASSEMBLY__
+#include <linux/bitops.h>
+#endif
+
/*
* Peripheral memory map
* only address used before device tree parsing
#define STM32_RCC_BASE 0x50000000
#define STM32_PWR_BASE 0x50001000
#define STM32_DBGMCU_BASE 0x50081000
+#define STM32_FMC2_BASE 0x58002000
#define STM32_TZC_BASE 0x5C006000
#define STM32_ETZPC_BASE 0x5C007000
+#define STM32_STGEN_BASE 0x5C008000
#define STM32_TAMP_BASE 0x5C00A000
+#define STM32_USART1_BASE 0x5C000000
+#define STM32_USART2_BASE 0x4000E000
+#define STM32_USART3_BASE 0x4000F000
+#define STM32_UART4_BASE 0x40010000
+#define STM32_UART5_BASE 0x40011000
+#define STM32_USART6_BASE 0x44003000
+#define STM32_UART7_BASE 0x40018000
+#define STM32_UART8_BASE 0x40019000
+
#define STM32_SYSRAM_BASE 0x2FFC0000
#define STM32_SYSRAM_SIZE SZ_256K
#define STM32_DDR_BASE 0xC0000000
#define STM32_DDR_SIZE SZ_1G
+#ifndef __ASSEMBLY__
+/* enumerated used to identify the SYSCON driver instance */
+enum {
+ STM32MP_SYSCON_UNKNOWN,
+ STM32MP_SYSCON_SYSCFG,
+};
+
+/*
+ * enumerated for boot interface from Bootrom, used in TAMP_BOOT_CONTEXT
+ * - boot device = bit 8:4
+ * - boot instance = bit 3:0
+ */
+#define BOOT_TYPE_MASK 0xF0
+#define BOOT_TYPE_SHIFT 4
+#define BOOT_INSTANCE_MASK 0x0F
+#define BOOT_INSTANCE_SHIFT 0
+
+enum boot_device {
+ BOOT_FLASH_SD = 0x10,
+ BOOT_FLASH_SD_1 = 0x11,
+ BOOT_FLASH_SD_2 = 0x12,
+ BOOT_FLASH_SD_3 = 0x13,
+
+ BOOT_FLASH_EMMC = 0x20,
+ BOOT_FLASH_EMMC_1 = 0x21,
+ BOOT_FLASH_EMMC_2 = 0x22,
+ BOOT_FLASH_EMMC_3 = 0x23,
+
+ BOOT_FLASH_NAND = 0x30,
+ BOOT_FLASH_NAND_FMC = 0x31,
+
+ BOOT_FLASH_NOR = 0x40,
+ BOOT_FLASH_NOR_QSPI = 0x41,
+
+ BOOT_SERIAL_UART = 0x50,
+ BOOT_SERIAL_UART_1 = 0x51,
+ BOOT_SERIAL_UART_2 = 0x52,
+ BOOT_SERIAL_UART_3 = 0x53,
+ BOOT_SERIAL_UART_4 = 0x54,
+ BOOT_SERIAL_UART_5 = 0x55,
+ BOOT_SERIAL_UART_6 = 0x56,
+ BOOT_SERIAL_UART_7 = 0x57,
+ BOOT_SERIAL_UART_8 = 0x58,
+
+ BOOT_SERIAL_USB = 0x60,
+ BOOT_SERIAL_USB_OTG = 0x62,
+
+ BOOT_FLASH_SPINAND = 0x70,
+ BOOT_FLASH_SPINAND_1 = 0x71,
+};
+
+/* TAMP registers */
+#define TAMP_BACKUP_REGISTER(x) (STM32_TAMP_BASE + 0x100 + 4 * x)
+#define TAMP_BACKUP_MAGIC_NUMBER TAMP_BACKUP_REGISTER(4)
+#define TAMP_BACKUP_BRANCH_ADDRESS TAMP_BACKUP_REGISTER(5)
+#define TAMP_COPRO_RSC_TBL_ADDRESS TAMP_BACKUP_REGISTER(17)
+#define TAMP_COPRO_STATE TAMP_BACKUP_REGISTER(18)
+#define TAMP_BOOT_CONTEXT TAMP_BACKUP_REGISTER(20)
+#define TAMP_BOOTCOUNT TAMP_BACKUP_REGISTER(21)
+
+#define TAMP_COPRO_STATE_OFF 0
+#define TAMP_COPRO_STATE_INIT 1
+#define TAMP_COPRO_STATE_CRUN 2
+#define TAMP_COPRO_STATE_CSTOP 3
+#define TAMP_COPRO_STATE_STANDBY 4
+#define TAMP_COPRO_STATE_CRASH 5
+
+#define TAMP_BOOT_MODE_MASK GENMASK(15, 8)
+#define TAMP_BOOT_MODE_SHIFT 8
+#define TAMP_BOOT_DEVICE_MASK GENMASK(7, 4)
+#define TAMP_BOOT_INSTANCE_MASK GENMASK(3, 0)
+#define TAMP_BOOT_FORCED_MASK GENMASK(7, 0)
+#define TAMP_BOOT_DEBUG_ON BIT(16)
+
+enum forced_boot_mode {
+ BOOT_NORMAL = 0x00,
+ BOOT_FASTBOOT = 0x01,
+ BOOT_RECOVERY = 0x02,
+ BOOT_STM32PROG = 0x03,
+ BOOT_UMS_MMC0 = 0x10,
+ BOOT_UMS_MMC1 = 0x11,
+ BOOT_UMS_MMC2 = 0x12,
+};
+
+/* offset used for BSEC driver: misc_read and misc_write */
+#define STM32_BSEC_SHADOW_OFFSET 0x0
+#define STM32_BSEC_SHADOW(id) (STM32_BSEC_SHADOW_OFFSET + (id) * 4)
+#define STM32_BSEC_OTP_OFFSET 0x80000000
+#define STM32_BSEC_OTP(id) (STM32_BSEC_OTP_OFFSET + (id) * 4)
+#define STM32_BSEC_LOCK_OFFSET 0xC0000000
+#define STM32_BSEC_LOCK(id) (STM32_BSEC_LOCK_OFFSET + (id) * 4)
+
+/* BSEC OTP index */
+#define BSEC_OTP_RPN 1
+#define BSEC_OTP_SERIAL 13
+#define BSEC_OTP_PKG 16
+#define BSEC_OTP_MAC 57
+#define BSEC_OTP_BOARD 59
+
+#endif /* __ASSEMBLY__ */
#endif /* _MACH_STM32_H_ */