*/
#include <common.h>
+#include <fdt_support.h>
+#include <init.h>
+#include <log.h>
+#include <spl.h>
#include <spl_gpio.h>
+#include <syscon.h>
#include <asm/armv8/mmu.h>
#include <asm/io.h>
+#include <asm/arch-rockchip/bootrom.h>
+#include <asm/arch-rockchip/clock.h>
#include <asm/arch-rockchip/gpio.h>
#include <asm/arch-rockchip/grf_rk3399.h>
#include <asm/arch-rockchip/hardware.h>
+#include <linux/bitops.h>
+#include <power/regulator.h>
DECLARE_GLOBAL_DATA_PTR;
#define GRF_EMMCCORE_CON11 0xff77f02c
#define GRF_BASE 0xff770000
+const char * const boot_devices[BROM_LAST_BOOTSOURCE + 1] = {
+ [BROM_BOOTSOURCE_EMMC] = "/sdhci@fe330000",
+ [BROM_BOOTSOURCE_SPINOR] = "/spi@ff1d0000",
+ [BROM_BOOTSOURCE_SD] = "/mmc@fe320000",
+};
+
static struct mm_region rk3399_mem_map[] = {
{
.virt = 0x0UL,
}
#endif
-int dram_init_banksize(void)
+int arch_cpu_init(void)
{
- size_t max_size = min((unsigned long)gd->ram_size, gd->ram_top);
-
- /* Reserve 0x200000 for ATF bl31 */
- gd->bd->bi_dram[0].start = 0x200000;
- gd->bd->bi_dram[0].size = max_size - gd->bd->bi_dram[0].start;
- return 0;
-}
+#ifdef CONFIG_SPL_BUILD
+ struct rk3399_pmusgrf_regs *sgrf;
+ struct rk3399_grf_regs *grf;
-int arch_cpu_init(void)
-{
- /* We do some SoC one time setting here. */
- struct rk3399_grf_regs * const grf = (void *)GRF_BASE;
+ /*
+ * Disable DDR and SRAM security regions.
+ *
+ * As we are entered from the BootROM, the region from
+ * 0x0 through 0xfffff (i.e. the first MB of memory) will
+ * be protected. This will cause issues with the DW_MMC
+ * driver, which tries to DMA from/to the stack (likely)
+ * located in this range.
+ */
+ sgrf = syscon_get_first_range(ROCKCHIP_SYSCON_PMUSGRF);
+ rk_clrsetreg(&sgrf->ddr_rgn_con[16], 0x1ff, 0);
+ rk_clrreg(&sgrf->slv_secure_con4, 0x2000);
- /* Emmc clock generator: disable the clock multipilier */
+ /* eMMC clock generator: disable the clock multipilier */
+ grf = syscon_get_first_range(ROCKCHIP_SYSCON_GRF);
rk_clrreg(&grf->emmccore_con[11], 0x0ff);
+#endif
return 0;
}
#endif
}
#endif
+
+#if defined(CONFIG_SPL_BUILD) && !defined(CONFIG_TPL_BUILD)
+const char *spl_decode_boot_device(u32 boot_device)
+{
+ int i;
+ static const struct {
+ u32 boot_device;
+ const char *ofpath;
+ } spl_boot_devices_tbl[] = {
+ { BOOT_DEVICE_MMC1, "/mmc@fe320000" },
+ { BOOT_DEVICE_MMC2, "/sdhci@fe330000" },
+ { BOOT_DEVICE_SPI, "/spi@ff1d0000" },
+ };
+
+ for (i = 0; i < ARRAY_SIZE(spl_boot_devices_tbl); ++i)
+ if (spl_boot_devices_tbl[i].boot_device == boot_device)
+ return spl_boot_devices_tbl[i].ofpath;
+
+ return NULL;
+}
+
+void spl_perform_fixups(struct spl_image_info *spl_image)
+{
+ void *blob = spl_image->fdt_addr;
+ const char *boot_ofpath;
+ int chosen;
+
+ /*
+ * Inject the ofpath of the device the full U-Boot (or Linux in
+ * Falcon-mode) was booted from into the FDT, if a FDT has been
+ * loaded at the same time.
+ */
+ if (!blob)
+ return;
+
+ boot_ofpath = spl_decode_boot_device(spl_image->boot_device);
+ if (!boot_ofpath) {
+ pr_err("%s: could not map boot_device to ofpath\n", __func__);
+ return;
+ }
+
+ chosen = fdt_find_or_add_subnode(blob, 0, "chosen");
+ if (chosen < 0) {
+ pr_err("%s: could not find/create '/chosen'\n", __func__);
+ return;
+ }
+ fdt_setprop_string(blob, chosen,
+ "u-boot,spl-boot-device", boot_ofpath);
+}
+
+#if defined(SPL_GPIO_SUPPORT)
+static void rk3399_force_power_on_reset(void)
+{
+ ofnode node;
+ struct gpio_desc sysreset_gpio;
+
+ debug("%s: trying to force a power-on reset\n", __func__);
+
+ node = ofnode_path("/config");
+ if (!ofnode_valid(node)) {
+ debug("%s: no /config node?\n", __func__);
+ return;
+ }
+
+ if (gpio_request_by_name_nodev(node, "sysreset-gpio", 0,
+ &sysreset_gpio, GPIOD_IS_OUT)) {
+ debug("%s: could not find a /config/sysreset-gpio\n", __func__);
+ return;
+ }
+
+ dm_gpio_set_value(&sysreset_gpio, 1);
+}
+#endif
+
+void spl_board_init(void)
+{
+#if defined(SPL_GPIO_SUPPORT)
+ struct rockchip_cru *cru = rockchip_get_cru();
+
+ /*
+ * The RK3399 resets only 'almost all logic' (see also in the TRM
+ * "3.9.4 Global software reset"), when issuing a software reset.
+ * This may cause issues during boot-up for some configurations of
+ * the application software stack.
+ *
+ * To work around this, we test whether the last reset reason was
+ * a power-on reset and (if not) issue an overtemp-reset to reset
+ * the entire module.
+ *
+ * While this was previously fixed by modifying the various places
+ * that could generate a software reset (e.g. U-Boot's sysreset
+ * driver, the ATF or Linux), we now have it here to ensure that
+ * we no longer have to track this through the various components.
+ */
+ if (cru->glb_rst_st != 0)
+ rk3399_force_power_on_reset();
+#endif
+
+#if defined(SPL_DM_REGULATOR)
+ /*
+ * Turning the eMMC and SPI back on (if disabled via the Qseven
+ * BIOS_ENABLE) signal is done through a always-on regulator).
+ */
+ if (regulators_enable_boot_on(false))
+ debug("%s: Cannot enable boot on regulator\n", __func__);
+#endif
+}
+#endif
projects / oweals / u-boot.git / blobdiff