arm: dts: sync dts for Allwinner H6

[oweals/u-boot.git] / arch / arm / dts / sun50i-h6-beelink-gs1.dts

diff --git a/arch/arm/dts/sun50i-h6-beelink-gs1.dts b/arch/arm/dts/sun50i-h6-beelink-gs1.dts
index 54b0882bedf32aed0dcbaa4d7c5585ee835d5d18..0dc33c90dd60e567ab4b6412adfac43dd2c69872 100644 (file)
--- a/arch/arm/dts/sun50i-h6-beelink-gs1.dts
+++ b/arch/arm/dts/sun50i-h6-beelink-gs1.dts
@@ -14,6 +14,7 @@
        compatible = "azw,beelink-gs1", "allwinner,sun50i-h6";
 
        aliases {
+               ethernet0 = &emac;
                serial0 = &uart0;
        };
 
@@ -21,6 +22,17 @@
                stdout-path = "serial0:115200n8";
        };
 
+       connector {
+               compatible = "hdmi-connector";
+               type = "a";
+
+               port {
+                       hdmi_con_in: endpoint {
+                               remote-endpoint = <&hdmi_out_con>;
+                       };
+               };
+       };
+
        leds {
                compatible = "gpio-leds";
 
@@ -41,6 +53,40 @@
        };
 };
 
+&de {
+       status = "okay";
+};
+
+&ehci0 {
+       status = "okay";
+};
+
+&emac {
+       pinctrl-names = "default";
+       pinctrl-0 = <&ext_rgmii_pins>;
+       phy-mode = "rgmii";
+       phy-handle = <&ext_rgmii_phy>;
+       phy-supply = <&reg_aldo2>;
+       status = "okay";
+};
+
+&hdmi {
+       status = "okay";
+};
+
+&hdmi_out {
+       hdmi_out_con: endpoint {
+               remote-endpoint = <&hdmi_con_in>;
+       };
+};
+
+&mdio {
+       ext_rgmii_phy: ethernet-phy@1 {
+               compatible = "ethernet-phy-ieee802.3-c22";
+               reg = <1>;
+       };
+};
+
 &mmc0 {
        vmmc-supply = <&reg_cldo1>;
        cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
@@ -57,6 +103,15 @@
        status = "okay";
 };
 
+&ohci0 {
+       status = "okay";
+};
+
+&pio {
+       vcc-pd-supply = <&reg_cldo1>;
+       vcc-pg-supply = <&reg_aldo1>;
+};
+
 &r_i2c {
        status = "okay";
 
@@ -177,8 +232,29 @@
        };
 };
 
+&r_pio {
+       /*
+        * PL0 and PL1 are used for PMIC I2C
+        * don't enable the pl-supply else
+        * it will fail at boot
+        *
+        * vcc-pl-supply = <&reg_aldo1>;
+        */
+       vcc-pm-supply = <&reg_aldo1>;
+};
+
 &uart0 {
        pinctrl-names = "default";
        pinctrl-0 = <&uart0_ph_pins>;
        status = "okay";
 };
+
+&usb2otg {
+       dr_mode = "host";
+       status = "okay";
+};
+
+&usb2phy {
+       usb0_vbus-supply = <&reg_vcc5v>;
+       status = "okay";
+};