Merge tag 'u-boot-atmel-fixes-2020.07-a' of https://gitlab.denx.de/u-boot/custodians...

[oweals/u-boot.git] / arch / arm / dts / stm32mp157c-ev1.dts

diff --git a/arch/arm/dts/stm32mp157c-ev1.dts b/arch/arm/dts/stm32mp157c-ev1.dts
index bd8ffc185f966b9e7d04a7851f27c73a5c4256c1..8a4c7ff31a922e7717f78a36eac0b5f963a6d9c9 100644 (file)
--- a/arch/arm/dts/stm32mp157c-ev1.dts
+++ b/arch/arm/dts/stm32mp157c-ev1.dts
@@ -174,16 +174,15 @@
 };
 
 &i2c2 {
-       pinctrl-names = "default";
+       pinctrl-names = "default", "sleep";
        pinctrl-0 = <&i2c2_pins_a>;
+       pinctrl-1 = <&i2c2_pins_sleep_a>;
        i2c-scl-rising-time-ns = <185>;
        i2c-scl-falling-time-ns = <20>;
        status = "okay";
 
        ov5640: camera@3c {
                compatible = "ovti,ov5640";
-               pinctrl-names = "default";
-               pinctrl-0 = <&ov5640_pins>;
                reg = <0x3c>;
                clocks = <&clk_ext_camera>;
                clock-names = "xclk";
@@ -212,7 +211,7 @@
                interrupt-parent = <&gpioi>;
                vdd-supply = <&v3v3>;
 
-               stmfx_pinctrl: stmfx-pin-controller {
+               stmfx_pinctrl: pinctrl {
                        compatible = "st,stmfx-0300-pinctrl";
                        gpio-controller;
                        #gpio-cells = <2>;
@@ -220,23 +219,18 @@
                        #interrupt-cells = <2>;
                        gpio-ranges = <&stmfx_pinctrl 0 0 24>;
 
-                       joystick_pins: joystick {
+                       joystick_pins: joystick-pins {
                                pins = "gpio0", "gpio1", "gpio2", "gpio3", "gpio4";
                                bias-pull-down;
                        };
-
-                       ov5640_pins: camera {
-                               pins = "agpio2", "agpio3"; /* stmfx pins 18 & 19 */
-                               drive-push-pull;
-                               output-low;
-                       };
                };
        };
 };
 
 &i2c5 {
-       pinctrl-names = "default";
+       pinctrl-names = "default", "sleep";
        pinctrl-0 = <&i2c5_pins_a>;
+       pinctrl-1 = <&i2c5_pins_sleep_a>;
        i2c-scl-rising-time-ns = <185>;
        i2c-scl-falling-time-ns = <20>;
        status = "okay";
@@ -291,6 +285,18 @@
        };
 };
 
+&sdmmc3 {
+       pinctrl-names = "default", "opendrain", "sleep";
+       pinctrl-0 = <&sdmmc3_b4_pins_a>;
+       pinctrl-1 = <&sdmmc3_b4_od_pins_a>;
+       pinctrl-2 = <&sdmmc3_b4_sleep_pins_a>;
+       broken-cd;
+       st,neg-edge;
+       bus-width = <4>;
+       vmmc-supply = <&v3v3>;
+       status = "disabled";
+};
+
 &spi1 {
        pinctrl-names = "default";
        pinctrl-0 = <&spi1_pins_a>;
@@ -304,7 +310,8 @@
        status = "disabled";
        pwm {
                pinctrl-0 = <&pwm2_pins_a>;
-               pinctrl-names = "default";
+               pinctrl-1 = <&pwm2_sleep_pins_a>;
+               pinctrl-names = "default", "sleep";
                status = "okay";
        };
        timer@1 {
@@ -318,7 +325,8 @@
        status = "disabled";
        pwm {
                pinctrl-0 = <&pwm8_pins_a>;
-               pinctrl-names = "default";
+               pinctrl-1 = <&pwm8_sleep_pins_a>;
+               pinctrl-names = "default", "sleep";
                status = "okay";
        };
        timer@7 {
@@ -332,7 +340,8 @@
        status = "disabled";
        pwm {
                pinctrl-0 = <&pwm12_pins_a>;
-               pinctrl-names = "default";
+               pinctrl-1 = <&pwm12_sleep_pins_a>;
+               pinctrl-names = "default", "sleep";
                status = "okay";
        };
        timer@11 {
@@ -346,8 +355,10 @@
 };
 
 &usbotg_hs {
-       dr_mode = "peripheral";
+       pinctrl-0 = <&usbotg_hs_pins_a>;
+       pinctrl-names = "default";
        phys = <&usbphyc_port1 0>;
+       phy-names = "usb2-phy";
        status = "okay";
 };