-/* SPDX-License-Identifier: GPL-2.0 */
+// SPDX-License-Identifier: GPL-2.0
/*
* Device Tree Source for the ebisu board
*
};
chosen {
- bootargs = "ignore_loglevel";
+ bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
stdout-path = "serial0:115200n8";
};
+ audio_clkout: audio-clkout {
+ /*
+ * This is same as <&rcar_sound 0>
+ * but needed to avoid cs2000/rcar_sound probe dead-lock
+ */
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <11289600>;
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm3 0 50000>;
+
+ brightness-levels = <512 511 505 494 473 440 392 327 241 133 0>;
+ default-brightness-level = <10>;
+
+ power-supply = <®_12p0v>;
+ };
+
+ cvbs-in {
+ compatible = "composite-video-connector";
+ label = "CVBS IN";
+
+ port {
+ cvbs_con: endpoint {
+ remote-endpoint = <&adv7482_ain7>;
+ };
+ };
+ };
+
+ hdmi-in {
+ compatible = "hdmi-connector";
+ label = "HDMI IN";
+ type = "a";
+
+ port {
+ hdmi_in_con: endpoint {
+ remote-endpoint = <&adv7482_hdmi>;
+ };
+ };
+ };
+
+ hdmi-out {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_out: endpoint {
+ remote-endpoint = <&adv7511_out>;
+ };
+ };
+ };
+
+ lvds-decoder {
+ compatible = "thine,thc63lvd1024";
+ vcc-supply = <®_3p3v>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ thc63lvd1024_in: endpoint {
+ remote-endpoint = <&lvds0_out>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+ thc63lvd1024_out: endpoint {
+ remote-endpoint = <&adv7511_in>;
+ };
+ };
+ };
+ };
+
memory@48000000 {
device_type = "memory";
/* first 128MB is reserved for secure area. */
regulator-boot-on;
regulator-always-on;
};
+
+ reg_12p0v: regulator2 {
+ compatible = "regulator-fixed";
+ regulator-name = "D12.0V";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ rsnd_ak4613: sound {
+ compatible = "simple-audio-card";
+
+ simple-audio-card,name = "rsnd-ak4613";
+ simple-audio-card,format = "left_j";
+ simple-audio-card,bitclock-master = <&sndcpu>;
+ simple-audio-card,frame-master = <&sndcpu>;
+
+ sndcodec: simple-audio-card,codec {
+ sound-dai = <&ak4613>;
+ };
+
+ sndcpu: simple-audio-card,cpu {
+ sound-dai = <&rcar_sound>;
+ };
+ };
+
+ vbus0_usb2: regulator-vbus0-usb2 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "USB20_VBUS_CN";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+
+ gpio = <&gpio6 4 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ vcc_sdhi0: regulator-vcc-sdhi0 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "SDHI0 Vcc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&gpio5 17 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ vccq_sdhi0: regulator-vccq-sdhi0 {
+ compatible = "regulator-gpio";
+
+ regulator-name = "SDHI0 VccQ";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpios = <&gpio5 18 GPIO_ACTIVE_HIGH>;
+ gpios-states = <1>;
+ states = <3300000 1>, <1800000 0>;
+ };
+
+ vcc_sdhi1: regulator-vcc-sdhi1 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "SDHI1 Vcc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&gpio0 4 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ vccq_sdhi1: regulator-vccq-sdhi1 {
+ compatible = "regulator-gpio";
+
+ regulator-name = "SDHI1 VccQ";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>;
+ gpios-states = <1>;
+ states = <3300000 1>, <1800000 0>;
+ };
+
+ vga {
+ compatible = "vga-connector";
+
+ port {
+ vga_in: endpoint {
+ remote-endpoint = <&adv7123_out>;
+ };
+ };
+ };
+
+ vga-encoder {
+ compatible = "adi,adv7123";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ adv7123_in: endpoint {
+ remote-endpoint = <&du_out_rgb>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ adv7123_out: endpoint {
+ remote-endpoint = <&vga_in>;
+ };
+ };
+ };
+ };
+
+ x12_clk: x12 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24576000>;
+ };
+
+ x13_clk: x13 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <74250000>;
+ };
+};
+
+&audio_clk_a {
+ clock-frequency = <22579200>;
};
&avb {
pinctrl-0 = <&avb_pins>;
pinctrl-names = "default";
- renesas,no-ether-link;
phy-handle = <&phy0>;
- phy-mode = "rgmii-txid";
status = "okay";
phy0: ethernet-phy@0 {
interrupt-parent = <&gpio2>;
interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
reset-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
+ /*
+ * TX clock internal delay mode is required for reliable
+ * 1Gbps communication using the KSZ9031RNX phy present on
+ * the Ebisu board, however, TX clock internal delay mode
+ * isn't supported on r8a77990. Thus, limit speed to
+ * 100Mbps for reliable communication.
+ */
+ max-speed = <100>;
+ };
+};
+
+&canfd {
+ pinctrl-0 = <&canfd0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ channel0 {
+ status = "okay";
+ };
+};
+
+&csi40 {
+ status = "okay";
+
+ ports {
+ port@0 {
+ reg = <0>;
+
+ csi40_in: endpoint {
+ clock-lanes = <0>;
+ data-lanes = <1 2>;
+ remote-endpoint = <&adv7482_txa>;
+ };
+ };
};
};
+&du {
+ pinctrl-0 = <&du_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ clocks = <&cpg CPG_MOD 724>,
+ <&cpg CPG_MOD 723>,
+ <&x13_clk>;
+ clock-names = "du.0", "du.1", "dclkin.0";
+
+ ports {
+ port@0 {
+ endpoint {
+ remote-endpoint = <&adv7123_in>;
+ };
+ };
+ };
+};
+
+&ehci0 {
+ dr_mode = "otg";
+ status = "okay";
+};
+
&extal_clk {
clock-frequency = <48000000>;
};
-&pfc {
- pinctrl-0 = <&scif_clk_pins>;
- pinctrl-names = "default";
+&hsusb {
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+
+ io_expander: gpio@20 {
+ compatible = "onnn,pca9654";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <22 IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ hdmi-encoder@39 {
+ compatible = "adi,adv7511w";
+ reg = <0x39>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+
+ adi,input-depth = <8>;
+ adi,input-colorspace = "rgb";
+ adi,input-clock = "1x";
+ adi,input-style = <1>;
+ adi,input-justification = "evenly";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ adv7511_in: endpoint {
+ remote-endpoint = <&thc63lvd1024_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ adv7511_out: endpoint {
+ remote-endpoint = <&hdmi_con_out>;
+ };
+ };
+ };
+ };
+
+ video-receiver@70 {
+ compatible = "adi,adv7482";
+ reg = <0x70>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ interrupt-parent = <&gpio0>;
+ interrupt-names = "intrq1", "intrq2";
+ interrupts = <7 IRQ_TYPE_LEVEL_LOW>,
+ <17 IRQ_TYPE_LEVEL_LOW>;
+
+ port@7 {
+ reg = <7>;
+ adv7482_ain7: endpoint {
+ remote-endpoint = <&cvbs_con>;
+ };
+ };
+
+ port@8 {
+ reg = <8>;
+
+ adv7482_hdmi: endpoint {
+ remote-endpoint = <&hdmi_in_con>;
+ };
+ };
+
+ port@a {
+ reg = <10>;
+
+ adv7482_txa: endpoint {
+ clock-lanes = <0>;
+ data-lanes = <1 2>;
+ remote-endpoint = <&csi40_in>;
+ };
+ };
+ };
+};
+
+&i2c3 {
+ status = "okay";
+
+ ak4613: codec@10 {
+ compatible = "asahi-kasei,ak4613";
+ #sound-dai-cells = <0>;
+ reg = <0x10>;
+ clocks = <&rcar_sound 3>;
+
+ asahi-kasei,in1-single-end;
+ asahi-kasei,in2-single-end;
+ asahi-kasei,out1-single-end;
+ asahi-kasei,out2-single-end;
+ asahi-kasei,out3-single-end;
+ asahi-kasei,out4-single-end;
+ asahi-kasei,out5-single-end;
+ asahi-kasei,out6-single-end;
+ };
+
+ cs2000: clk-multiplier@4f {
+ #clock-cells = <0>;
+ compatible = "cirrus,cs2000-cp";
+ reg = <0x4f>;
+ clocks = <&audio_clkout>, <&x12_clk>;
+ clock-names = "clk_in", "ref_clk";
+
+ assigned-clocks = <&cs2000>;
+ assigned-clock-rates = <24576000>; /* 1/1 divide */
+ };
+};
+
+&i2c_dvfs {
+ status = "okay";
+
+ clock-frequency = <400000>;
+
+ pmic: pmic@30 {
+ pinctrl-0 = <&irq0_pins>;
+ pinctrl-names = "default";
+
+ compatible = "rohm,bd9571mwv";
+ reg = <0x30>;
+ interrupt-parent = <&intc_ex>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ rohm,ddr-backup-power = <0x1>;
+ rohm,rstbmode-level;
+ };
+};
+
+&lvds0 {
+ status = "okay";
+
+ clocks = <&cpg CPG_MOD 727>,
+ <&x13_clk>,
+ <&extal_clk>;
+ clock-names = "fck", "dclkin.0", "extal";
+
+ ports {
+ port@1 {
+ lvds0_out: endpoint {
+ remote-endpoint = <&thc63lvd1024_in>;
+ };
+ };
+ };
+};
+
+&lvds1 {
+ /*
+ * Even though the LVDS1 output is not connected, the encoder must be
+ * enabled to supply a pixel clock to the DU for the DPAD output when
+ * LVDS0 is in use.
+ */
+ status = "okay";
+
+ clocks = <&cpg CPG_MOD 727>,
+ <&x13_clk>,
+ <&extal_clk>;
+ clock-names = "fck", "dclkin.0", "extal";
+};
+
+&ohci0 {
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&pcie_bus_clk {
+ clock-frequency = <100000000>;
+};
+
+&pciec0 {
+ status = "okay";
+};
+
+&pfc {
avb_pins: avb {
mux {
groups = "avb_link", "avb_mii";
};
};
+ canfd0_pins: canfd0 {
+ groups = "canfd0_data";
+ function = "canfd0";
+ };
+
+ du_pins: du {
+ groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
+ function = "du";
+ };
+
+ irq0_pins: irq0 {
+ groups = "intc_ex_irq0";
+ function = "intc_ex";
+ };
+
+ pwm3_pins: pwm3 {
+ groups = "pwm3_b";
+ function = "pwm3";
+ };
+
+ pwm5_pins: pwm5 {
+ groups = "pwm5_a";
+ function = "pwm5";
+ };
+
scif2_pins: scif2 {
groups = "scif2_data_a";
function = "scif2";
};
- scif_clk_pins: scif_clk {
- groups = "scif_clk_a";
- function = "scif_clk";
+ sdhi0_pins: sd0 {
+ groups = "sdhi0_data4", "sdhi0_ctrl";
+ function = "sdhi0";
+ power-source = <3300>;
};
- sdhi3_pins: sd2 {
- groups = "sdhi3_data8", "sdhi3_ctrl";
- function = "sdhi3";
+ sdhi0_pins_uhs: sd0_uhs {
+ groups = "sdhi0_data4", "sdhi0_ctrl";
+ function = "sdhi0";
power-source = <1800>;
};
- sdhi3_pins_uhs: sd2_uhs {
- groups = "sdhi3_data8", "sdhi3_ctrl";
+ sdhi1_pins: sd1 {
+ groups = "sdhi1_data4", "sdhi1_ctrl";
+ function = "sdhi1";
+ power-source = <3300>;
+ };
+
+ sdhi1_pins_uhs: sd1_uhs {
+ groups = "sdhi1_data4", "sdhi1_ctrl";
+ function = "sdhi1";
+ power-source = <1800>;
+ };
+
+ sdhi3_pins: sd3 {
+ groups = "sdhi3_data8", "sdhi3_ctrl", "sdhi3_ds";
function = "sdhi3";
power-source = <1800>;
};
+
+ sound_clk_pins: sound_clk {
+ groups = "audio_clk_a", "audio_clk_b_a", "audio_clk_c_a",
+ "audio_clkout_a", "audio_clkout1_a";
+ function = "audio_clk";
+ };
+
+ sound_pins: sound {
+ groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data";
+ function = "ssi";
+ };
+
+ usb0_pins: usb {
+ groups = "usb0_b", "usb0_id";
+ function = "usb0";
+ };
+
+ usb30_pins: usb30 {
+ groups = "usb30";
+ function = "usb30";
+ };
+};
+
+&pwm3 {
+ pinctrl-0 = <&pwm3_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&pwm5 {
+ pinctrl-0 = <&pwm5_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&rcar_sound {
+ pinctrl-0 = <&sound_pins &sound_clk_pins>;
+ pinctrl-names = "default";
+
+ /* Single DAI */
+ #sound-dai-cells = <0>;
+
+ /* audio_clkout0/1/2/3 */
+ #clock-cells = <1>;
+ clock-frequency = <12288000 11289600>;
+
+ status = "okay";
+
+ /* update <audio_clk_b> to <cs2000> */
+ clocks = <&cpg CPG_MOD 1005>,
+ <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
+ <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
+ <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
+ <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
+ <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
+ <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
+ <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
+ <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
+ <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
+ <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
+ <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+ <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+ <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+ <&audio_clk_a>, <&cs2000>, <&audio_clk_c>,
+ <&cpg CPG_CORE R8A77990_CLK_ZA2>;
+
+ rcar_sound,dai {
+ dai0 {
+ playback = <&ssi0 &src0 &dvc0>;
+ capture = <&ssi1 &src1 &dvc1>;
+ };
+ };
+
+};
+
+&rwdt {
+ timeout-sec = <60>;
+ status = "okay";
+};
+
+&scif2 {
+ pinctrl-0 = <&scif2_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
};
&sdhi0 {
+ pinctrl-0 = <&sdhi0_pins>;
+ pinctrl-1 = <&sdhi0_pins_uhs>;
+ pinctrl-names = "default", "state_uhs";
+
+ vmmc-supply = <&vcc_sdhi0>;
+ vqmmc-supply = <&vccq_sdhi0>;
+ cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
+ bus-width = <4>;
+ sd-uhs-sdr50;
+ sd-uhs-sdr104;
status = "okay";
};
&sdhi1 {
+ pinctrl-0 = <&sdhi1_pins>;
+ pinctrl-1 = <&sdhi1_pins_uhs>;
+ pinctrl-names = "default", "state_uhs";
+
+ vmmc-supply = <&vcc_sdhi1>;
+ vqmmc-supply = <&vccq_sdhi1>;
+ cd-gpios = <&gpio3 14 GPIO_ACTIVE_LOW>;
+ bus-width = <4>;
+ sd-uhs-sdr50;
+ sd-uhs-sdr104;
status = "okay";
};
&sdhi3 {
/* used for on-board 8bit eMMC */
pinctrl-0 = <&sdhi3_pins>;
- pinctrl-1 = <&sdhi3_pins_uhs>;
+ pinctrl-1 = <&sdhi3_pins>;
pinctrl-names = "default", "state_uhs";
vmmc-supply = <®_3p3v>;
vqmmc-supply = <®_1p8v>;
- bus-width = <8>;
+ mmc-ddr-1_8v;
mmc-hs200-1_8v;
+ mmc-hs400-1_8v;
+ bus-width = <8>;
non-removable;
status = "okay";
};
-&scif2 {
- pinctrl-0 = <&scif2_pins>;
+&ssi1 {
+ shared-pin;
+};
+
+&usb2_phy0 {
+ pinctrl-0 = <&usb0_pins>;
+ pinctrl-names = "default";
+
+ vbus-supply = <&vbus0_usb2>;
+ status = "okay";
+};
+
+&usb3_peri0 {
+ companion = <&xhci0>;
+ status = "okay";
+};
+
+&vin4 {
+ status = "okay";
+};
+
+&vin5 {
+ status = "okay";
+};
+
+&xhci0 {
+ pinctrl-0 = <&usb30_pins>;
pinctrl-names = "default";
status = "okay";
projects / oweals / u-boot.git / blobdiff