select ARCH_EARLY_INIT_R
select BOARD_EARLY_INIT_F
select SYS_I2C_MXC
- select SYS_I2C_MXC_I2C1
- select SYS_I2C_MXC_I2C2
+ select SYS_I2C_MXC_I2C1 if !DM_I2C
+ select SYS_I2C_MXC_I2C2 if !DM_I2C
imply PANIC_HANG
config ARCH_LS1028A
select ARCH_EARLY_INIT_R
select BOARD_EARLY_INIT_F
select SYS_I2C_MXC
- select SYS_I2C_MXC_I2C1
- select SYS_I2C_MXC_I2C2
- select SYS_I2C_MXC_I2C3
- select SYS_I2C_MXC_I2C4
- select SYS_I2C_MXC_I2C5
- select SYS_I2C_MXC_I2C6
- select SYS_I2C_MXC_I2C7
- select SYS_I2C_MXC_I2C8
select SYS_FSL_ERRATUM_A008997
select SYS_FSL_ERRATUM_A009007
select SYS_FSL_ERRATUM_A008514 if !TFABOOT
select SYS_FSL_ERRATUM_A009663 if !TFABOOT
select SYS_FSL_ERRATUM_A009942 if !TFABOOT
+ select SYS_FSL_ERRATUM_A050382
+ select RESV_RAM if GIC_V3_ITS
imply PANIC_HANG
config ARCH_LS1043A
select SYS_FSL_HAS_DDR4
select ARCH_EARLY_INIT_R
select BOARD_EARLY_INIT_F
- select SYS_I2C_MXC
- select SYS_I2C_MXC_I2C1
- select SYS_I2C_MXC_I2C2
- select SYS_I2C_MXC_I2C3
- select SYS_I2C_MXC_I2C4
+ select SYS_I2C_MXC if !DM_I2C
+ select SYS_I2C_MXC_I2C1 if !DM_I2C
+ select SYS_I2C_MXC_I2C2 if !DM_I2C
+ select SYS_I2C_MXC_I2C3 if !DM_I2C
+ select SYS_I2C_MXC_I2C4 if !DM_I2C
imply CMD_PCI
config ARCH_LS1046A
select SYS_FSL_SRDS_2
select ARCH_EARLY_INIT_R
select BOARD_EARLY_INIT_F
- select SYS_I2C_MXC
- select SYS_I2C_MXC_I2C1
- select SYS_I2C_MXC_I2C2
- select SYS_I2C_MXC_I2C3
- select SYS_I2C_MXC_I2C4
+ select SYS_I2C_MXC if !DM_I2C
+ select SYS_I2C_MXC_I2C1 if !DM_I2C
+ select SYS_I2C_MXC_I2C2 if !DM_I2C
+ select SYS_I2C_MXC_I2C3 if !DM_I2C
+ select SYS_I2C_MXC_I2C4 if !DM_I2C
imply SCSI
imply SCSI_AHCI
select ARCH_EARLY_INIT_R
select BOARD_EARLY_INIT_F
select SYS_I2C_MXC
- select SYS_I2C_MXC_I2C1
- select SYS_I2C_MXC_I2C2
- select SYS_I2C_MXC_I2C3
- select SYS_I2C_MXC_I2C4
+ select SYS_I2C_MXC_I2C1 if !TFABOOT
+ select SYS_I2C_MXC_I2C2 if !TFABOOT
+ select SYS_I2C_MXC_I2C3 if !TFABOOT
+ select SYS_I2C_MXC_I2C4 if !TFABOOT
+ select RESV_RAM if GIC_V3_ITS
imply SCSI
imply PANIC_HANG
select ARCH_EARLY_INIT_R
select BOARD_EARLY_INIT_F
select SYS_I2C_MXC
- select SYS_I2C_MXC_I2C1
- select SYS_I2C_MXC_I2C2
- select SYS_I2C_MXC_I2C3
- select SYS_I2C_MXC_I2C4
+ select SYS_I2C_MXC_I2C1 if !TFABOOT
+ select SYS_I2C_MXC_I2C2 if !TFABOOT
+ select SYS_I2C_MXC_I2C3 if !TFABOOT
+ select SYS_I2C_MXC_I2C4 if !TFABOOT
+ select RESV_RAM if GIC_V3_ITS
imply DISTRO_DEFAULTS
imply PANIC_HANG
select SYS_FSL_DDR_VER_50
select SYS_FSL_EC1
select SYS_FSL_EC2
+ select SYS_FSL_ERRATUM_A050106
select SYS_FSL_HAS_RGMII
select SYS_FSL_HAS_SEC
select SYS_FSL_HAS_CCN508
select ARCH_EARLY_INIT_R
select BOARD_EARLY_INIT_F
select SYS_I2C_MXC
- select SYS_I2C_MXC_I2C1
- select SYS_I2C_MXC_I2C2
- select SYS_I2C_MXC_I2C3
- select SYS_I2C_MXC_I2C4
- select SYS_I2C_MXC_I2C5
- select SYS_I2C_MXC_I2C6
- select SYS_I2C_MXC_I2C7
- select SYS_I2C_MXC_I2C8
+ select RESV_RAM if GIC_V3_ITS
imply DISTRO_DEFAULTS
imply PANIC_HANG
imply SCSI
select SYS_FSL_SEC_BE
config FSL_LSCH3
+ select ARCH_MISC_INIT
bool
config NXP_LSCH3_2
bool
-config FSL_MC_ENET
- bool "Management Complex network"
- depends on ARCH_LS2080A || ARCH_LS1088A || ARCH_LX2160A
- default y
- select RESV_RAM
- help
- Enable Management Complex (MC) network
-
menu "Layerscape architecture"
depends on FSL_LSCH2 || FSL_LSCH3
config FSL_LAYERSCAPE
bool
-config FSL_PCIE_COMPAT
- string "PCIe compatible of Kernel DT"
- depends on PCIE_LAYERSCAPE || PCIE_LAYERSCAPE_GEN4
- default "fsl,ls1012a-pcie" if ARCH_LS1012A
- default "fsl,ls1028a-pcie" if ARCH_LS1028A
- default "fsl,ls1043a-pcie" if ARCH_LS1043A
- default "fsl,ls1046a-pcie" if ARCH_LS1046A
- default "fsl,ls2080a-pcie" if ARCH_LS2080A
- default "fsl,ls1088a-pcie" if ARCH_LS1088A
- default "fsl,lx2160a-pcie" if ARCH_LX2160A
- help
- This compatible is used to find pci controller node in Kernel DT
- to complete fixup.
-
config HAS_FEATURE_GIC64K_ALIGN
bool
default y if ARCH_LS1043A
config SYS_FSL_ERRATUM_A009798
bool "Workaround for USB PHY erratum A009798"
+config SYS_FSL_ERRATUM_A050106
+ bool "Workaround for USB PHY erratum A050106"
+ help
+ USB3.0 Receiver needs to enable fixed equalization
+ for each of PHY instances in an SOC. This is similar
+ to erratum A-009007, but this one is for LX2160A,
+ and the register value is different.
+
config SYS_FSL_ERRATUM_A010315
bool "Workaround for PCIe erratum A010315"
Enable the EMC2305 fan controller for configuration of fan
speed.
-config SECURE_BOOT
- bool "Secure Boot"
+config NXP_ESBC
+ bool "NXP_ESBC"
help
Enable Freescale Secure Boot feature
But some QSPI flash size up to 64MBytes, so initialize the QSPI AHB
bus for those flashes to support the full QSPI flash size.
+config FSPI_AHB_EN_4BYTE
+ bool "Enable 4-byte Fast Read command for AHB mode"
+ default n
+ help
+ The default setting for FlexSPI AHB bus just supports 3-byte addressing.
+ But some FlexSPI flash sizes are up to 64MBytes.
+ This flag enables fast read command for AHB mode and modifies required
+ LUT to support full FlexSPI flash.
+
config SYS_CCI400_OFFSET
hex "Offset for CCI400 base"
depends on SYS_FSL_HAS_CCI400
config SYS_FSL_I2C_CLK_DIV
int "I2C clock divider"
default 1 if ARCH_LS1043A
+ default 4 if ARCH_LS1012A
+ default 4 if ARCH_LS1028A
+ default 8 if ARCH_LX2160A
+ default 8 if ARCH_LS1088A
default 2
help
This is the divider that is used to derive I2C clock from Platform
config SYS_FSL_IFC_CLK_DIV
int "IFC clock divider"
default 1 if ARCH_LS1043A
+ default 4 if ARCH_LS1012A
+ default 4 if ARCH_LS1028A
+ default 8 if ARCH_LX2160A
+ default 8 if ARCH_LS1088A
default 2
help
This is the divider that is used to derive IFC clock from Platform
config SYS_FSL_ERRATUM_A009929
bool
+config SYS_FSL_ERRATUM_A050382
+ bool
config SYS_FSL_HAS_RGMII
bool
depends on SYS_FSL_EC1 || SYS_FSL_EC2
-
-config SYS_MC_RSV_MEM_ALIGN
- hex "Management Complex reserved memory alignment"
- depends on RESV_RAM
- default 0x20000000 if ARCH_LS2080A || ARCH_LS1088A || ARCH_LX2160A
- help
- Reserved memory needs to be aligned for MC to use. Default value
- is 512MB.
-
config SPL_LDSCRIPT
default "arch/arm/cpu/armv8/u-boot-spl.lds" if ARCH_LS1043A || ARCH_LS1046A || ARCH_LS2080A
help
For some SoC(such as LS1043A and LS1046A), USB and QE-HDLC multiplex use
pins, select it when the pins are assigned to USB.
-
-config TFABOOT
- bool "Support for booting from TFA"
- default n
- help
- Enabling this will make a U-Boot binary that is capable of being
- booted via TFA.
projects / oweals / u-boot.git / blobdiff